llas, W1ZR
--
Message: 23
Date: Wed, 29 May 2019 10:32:19 -0400
From: Don Wilhelm
To: Mike Sanders , Elecraft Reflector
Subject: Re: [Elecraft] K3, KPA500, KAT500 and 2M brick amp keying
Message-ID:
Content-Type: text/plain; charset=utf-8; format=flowed
Mike,
The real answer to your questi
Mike,
The real answer to your question is - do you have a problem with the
KPA500 and your 2M brick amplifier being keyed at the same time?
There should be no RF input to the KPA500 when on 2M, and when on HF+6M
there should be no RF input to your 2M amplifier.
So, are you OK with keying
I don't have room to set it all up right now, but I have done that in the
past. Just left the KPA500 & KAT500 unpowered. Also with an external 430
transverter and amp.
Jim Rhodes
K0XU
On Wed, May 29, 2019, 08:10 Mike Sanders wrote:
> I have a K3 with built in 2M transverter. The K3 drives the
I have a K3 with built in 2M transverter. The K3 drives the KPA500 and
KAT500 with the KPAK3AUX. Everything works
fine. I do not have the key line interrupter installed. Reading notes 5
and 6 on the KPAK3AUX I am a bit confused.
I want to key a 2M brick amplifier with the key out line on the
4 matches
Mail list logo