I'm trying to get my remote setup running again at a different location. It's been awhile since I last set it up, I was using it at my winter home for several months without a problem, but can't get it to work here. I have the feeling I'm forgetting something. Here's my setup and the problem. I'm connected to the internet via Comcast. I'm at my summer home, and just had the new Comcast router installed yesterday. I'm using a WiFi extender that I used in the past with no problem, the extender is configured with my connection ID with a _EXT extension, without a password. The RRC 1258 is connected to the extender via an Ethernet cable, the setup I've been using with no issues. When I run the Microbit setup program using a USB cable connected to the RRC 1258 I'm seeing the local RRC, but not the remote one at the K3 site. I vaguely remember that I should be seeing both RRC 1258's ? But I'm not sure. Anyway when I turn on the K3/0 mini I get the connect beep(not the no-connection alarm) but the K3/0 shows a freq and TERM and the controls are inoperative, turning the main VFO does nothing, etc. So to recap. 1. I think I should see both RRC's in the Microbit s/w config window ?
2. Do I need to enter the login info for the local router, but I forget where to do so if true. Anyone have anything for me to try while I wait to call Elecraft support ? 73 Jeff kb2m ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
