Does anyone have a circuit which will convert K3 band data to the
analog voltage levels expected by the
ICOM IC-2KL amplifier? I keep forgetting to do band changes on the amp
during contests
73
Eric, VA7DZ
--
This message has been scanned for viruses and
dangerous content by
BlankAt least the K3 allows one to step through the bands -both-
directions and unwanted bands can be locked out / skipped.
It's not the slightest issue for me.
I've owned a series of Kenwoods that one could only step through
the bands in -one- direction ... upward. (;-(
73! Ken Kopp -
When I want to QSY to 6 meters, I expect to punch a button that says
6M or 50. If a friend comes over to operate my K3, I don't want
to have to point to a yellow sticky note hanging from a shelf, and
then spend 10 minutes briefing them on the intricacies of using the
user-programmed memories.
, 2008 4:59 AM
Subject: Re: [Elecraft] K3 Bandswitching-My experiences to Date
When I want to QSY to 6 meters, I expect to punch a button that says
6M or 50. If a friend comes over to operate my K3, I don't want
to have to point to a yellow sticky note hanging from a shelf, and
then spend 10
I'm a little mystified by the passion some folks seem to have about
accelerating the band switching process. Do you really switch bands that
much? I suppose some do.
The issue (at least for me) isn't speed. The issue is reliability and user
friendliness.
The reason why so many of us are
Hi Everyone,
In hanging around the K3 booth in Dayton this year (some would say I was
'lurking' around the booth) I overheard several K3 prospective owners
pressing Wayne on the absence of dedicated bandswitches and bandstacking
registers.
Having been a user of Icom and Ten Tec gear for
] K3 Bandswitching-My experiences to Date
Hi Everyone,
In hanging around the K3 booth in Dayton this year (some would say I was
'lurking' around the booth) I overheard several K3 prospective owners
pressing Wayne on the absence of dedicated bandswitches and bandstacking
registers.
Having been
, 2008 6:32 PM
Subject: Re: [Elecraft] K3 Bandswitching-My experiences to Date
Dave: (Another fine LQ)
I'd still prefer the ICOM/TenTec method of bandswitch but maybe once we
get the LP-Pan and PowerSDR running full time, band changing will be
'point and click'. I plan to use a dedicated PC
I posted this idea on May 9. I got several favorable replies and
thanks for it. I still find it very efficient, so I offer this again.
There is plenty more memory space left to add data bands.
-
A complete BAND SWITCHING scheme using 23 memories
I tried
9 matches
Mail list logo