Re: [Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-08 Thread Ken Roberson
, Rich - K1HTV = = = -Original Message- From: Joe Subich, W4TV [mailto:li...@subich.com] Sent: Tuesday, June 07, 2011 19:42 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Hi Cut Low Cut granularity bug? Also, when the SHIFT granularity (CONFIG:PB CTL

[Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-07 Thread Rich - K1HTV
K3 Hi Cut Low Cut granularity bug? Lately I've been running a number of digital modes (JT65A, PSK31 RTTY) on the HF bands. The K3's APF and dual PB filters really help to copy weak RTTY signals, especially when there is QRM. When using the JT65A mode, signals even weaker than -20 dB can be

Re: [Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-07 Thread Joe Subich, W4TV
Also, when the SHIFT granularity (CONFIG:PB CTL) is changed from 50Hz to 10Hz, the Hi Cut and Low Cut controls do not work at all! Is this a BUG ora FEATURE? I'm presently using K3 firmware update MCU 4.36 . Feature ... as documented every since the 10 Hz steps for shift/width was first

Re: [Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-07 Thread Rich - K1HTV
:42 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Hi Cut Low Cut granularity bug? Also, when the SHIFT granularity (CONFIG:PB CTL) is changed from 50Hz to 10Hz, the Hi Cut and Low Cut controls do not work at all! Is this a BUG ora FEATURE? I'm presently using K3 firmware update

Re: [Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-07 Thread Joe Subich, W4TV
. 73, Rich - K1HTV = = = -Original Message- From: Joe Subich, W4TV [mailto:li...@subich.com] Sent: Tuesday, June 07, 2011 19:42 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Hi Cut Low Cut granularity bug? Also, when the SHIFT granularity (CONFIG:PB CTL) is changed

Re: [Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-07 Thread Wayne Burdick
19:42 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Hi Cut Low Cut granularity bug? Also, when the SHIFT granularity (CONFIG:PB CTL) is changed from 50Hz to 10Hz, the Hi Cut and Low Cut controls do not work at all! Is this a BUG ora FEATURE? I'm presently using K3 firmware

Re: [Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-07 Thread Vic K2VCO
@mailman.qth.net Subject: Re: [Elecraft] K3 Hi Cut Low Cut granularity bug? Also, when the SHIFT granularity (CONFIG:PB CTL) is changed from 50Hz to 10Hz, the Hi Cut and Low Cut controls do not work at all! Is this a BUG ora FEATURE? I'm presently using K3 firmware update MCU 4.36 . Feature

Re: [Elecraft] K3 Hi Cut Low Cut granularity bug?

2011-06-07 Thread Ed Muns
I don't see this as a limitation because I only use HI CUT and LO CUT in SSB where 50 Hz steps is just fine. For CW and RTTY, the 10 Hz steps of SHIFT and WIDTH are great. Ed - W0YK N6KR wrote: Providing HI CUT and LO CUT when SHIFT is configured for 10 Hz increments would require a