I wonder if this thread is related to the thread about TX Gain
calibration, from which it seems to have forked.
If the TX gain calibration hasn't been done properly, or the conditions
are not similar (e.g. the PA is not providing a 50 ohm resistive load,
or there is a significant operating
movement.
Graham G3TCT
- Original Message -
From: Charles Harpole [EMAIL PROTECTED]
To: Kamal Sirageldin [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Thursday, September 25, 2008 3:48 AM
Subject: [Elecraft] K3 RF-out spikes,was: K3 SSB Power Control and ALC
Metering
Yep, my recently
Hallo Graham,
thank you for looking at this with a scope.
Did you try changing the power level while you were in SSB at lowish
power, e.g. from 30W to 35W? This (at least it used to) usually caused
my K3 to settle in on a power level which tended to be between 3db and
10dB lower than
Yep, my recently factory re-done K3-100F #309 also
has RF output power spikes upon first key down or
first SSB word spoken. The spike appears to be
at fully 120 watts when rig is adjusted to 50 watts.
When oh when will this rig be at least half way
done? 73,
Charles Harpole
[EMAIL
4 matches
Mail list logo