: Tuesday, September 22, 2009 7:46 PM
To: Maarten
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 VHf use
On Tue, 22 Sep 2009 19:01:27 -0400, Maarten n...@cox.net wrote:
Since one week I am a K3 owner with the KXV3A option. When hooking up the
XV50,144,222,432 transverters I
Excellent post! I was trying to remember where this was but wasn't
remembering off the top of my head. Thanks for providing that for these
guys. I think there are a good number of K3 users out there that wish
they had a feature to do that one thing that bugs them and little do
they know that
Richard Ferch wrote (quoting beta release notes):
Note: If you make frequent use of this feature, you may want to
use CW reverse on bands where you use USB, and CW normal on bands where
you use LSB. This results in perfect pitch matching when listening to a
CW signal and switching from SSB to
Since one week I am a K3 owner with the KXV3A option. When hooking up the
XV50,144,222,432 transverters I noticed that the only option with the K3 and
the KXV3A is separate transmit and receive IF ports. Is there a setting in
the K3 to share a single IF port for TX and RX? It would save me some
On Tue, 22 Sep 2009 19:01:27 -0400, Maarten n...@cox.net wrote:
Since one week I am a K3 owner with the KXV3A option. When hooking up the
XV50,144,222,432 transverters I noticed that the only option with the K3 and
the KXV3A is separate transmit and receive IF ports. Is there a setting in
the K3
frequency shifts by whatever your
selected CW pitch is so you do not have to retune again.
Maarten N1DZ
-Original Message-
From: Radio Amateur N5GE [mailto:n...@n5ge.com]
Sent: Tuesday, September 22, 2009 7:46 PM
To: Maarten
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 VHf use
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 VHf use
On Tue, 22 Sep 2009 19:01:27 -0400, Maarten n...@cox.net wrote:
Since one week I am a K3 owner with the KXV3A option. When hooking up the
XV50,144,222,432 transverters I noticed that the only option with the K3
and
the KXV3A
Maarten,
There are two related but different configuration options for the
situation you describe. The first option lets you use your CW paddles or
key while the radio is in SSB mode. The newer option (so far in beta
firmware only) adjusts the offset so that when you switch modes from SSB
to
8 matches
Mail list logo