Bruce,
Several of the programs mentioned will handle sending CW via a macro. You
said "Both read and write". Does that mean you need the software to decode
the received CW as well as send it?
Win4K3 includes a 'terminal' function that can use the built-in CW
encode/decode capability of the K3.
Tnx for the input. I use WSJT for ft8.
I am looking for controlling the radio for CW. Both read and write. also
logging. I need marcos for fast response to dx.
Bruce Wade
__
Elecraft mailing list
Home:
I use a variety of things depending on what I want to do. I often run
Win4k3 connected to the radio, and then other software like N1MM, DxLab,
etc. connected to the 'virtual radios' of Win4K3 via virtual serial port
pairs. I have found this a reliable way to allow multiple programs to each
'think'
Win4K3
Sent from my iPhone
> On Aug 13, 2021, at 7:33 PM, Jim Brown wrote:
>
> On 8/13/2021 3:32 PM, Bruce Wade wrote:
>> What are people using to control the K3?
>
> What control do you need? Do you want to run your station remotely, or only
> from the shack? In addition to the software
On 8/13/2021 3:32 PM, Bruce Wade wrote:
What are people using to control the K3?
What control do you need? Do you want to run your station remotely, or
only from the shack? In addition to the software others have mentioned,
virtually all contest loggers provide the controls needed for
Win4k3suite
Mike
Kk9v
On Fri, Aug 13, 2021, 7:12 PM David Bunte wrote:
> Bruce -
>
> I have been using the DXLab suite of modules for logging and rig control. I
> think I have been using it for close to ten years and have never wished for
> anything else.
>
> Dave - K9FN
>
> On Fri, Aug 13,
Bruce -
I have been using the DXLab suite of modules for logging and rig control. I
think I have been using it for close to ten years and have never wished for
anything else.
Dave - K9FN
On Fri, Aug 13, 2021 at 6:35 PM Bruce Wade wrote:
> What are people using to control the K3?
> Bruce Wade
Flrig or fldigi or JS8Call or WSJT-X
73, tom w7sua
On 8/13/2021 3:32 PM, Bruce Wade wrote:
What are people using to control the K3?
Bruce Wade
__
Elecraft mailing list
Home:
What are people using to control the K3?
Bruce Wade
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Has anyone had any luck running with control software for the K3 running
under Linux?
In particular, if anyone has run the N4PY software under the wine
emulator, I would like to hear your opinions about it.
Bob K4ERR
__
Elecraft mailing
10 matches
Mail list logo