Keeping a DCM-style record of each K3 would be virtually impossible.
Factory-installed K3 options could be tracked by the original
buyer/owner/builder but not by serial number, since many owners have
multiple radios. More to the point, options are also
bought/sold/traded in and out of K3's. The
I believe that AFTER November 2009 !! all K3s shipped had the Mod fitted as
standard.
Ken..G0ORH
CW4EVER
Sent from my iPhone
On 27 Dec 2010, at 22:36, Julian, G4ILO julian.g4...@gmail.com wrote:
Was there not a modification required to the original KXV3 on the IF output,
a
Dick Dievendorff wrote:
There is a single resistor mod on the RF board for greater IF gain for the
P3. No mod to the KXV3 or KXV3A, but the P3 does use the IF out connector,
so one of the KXV3 or KXV3A is used.
Ah, that was probably the one I was thinking about. As it affected the IF
The mod requires removal of just the front half of the bottom cover, so it is
about as easy as could be for a SMT part replacement.
73 de Dick, K6KR
On Dec 28, 2010, at 1:41, Julian, G4ILO julian.g4...@gmail.com wrote:
Dick Dievendorff wrote:
There is a single resistor mod on the RF
Does Elecraft keep a history of each K3 manufactured and the follow on
mods? Tracked by serial number? My #250 has been back to the mothership
several times for repairs/mods etc. I am not sure if my KXV3 has been
changed to the 'A' or not. Thinking about adding the P3 to the lineup
and not
The P3 does not require the KXV3A, the original KXV3 works fine. The main
addition for the A has to do with a new TMP connector for the K144XV.
Dick, K6KR
On Dec 27, 2010, at 0:43, cx...@4email.net wrote:
Does Elecraft keep a history of each K3 manufactured and the follow on
mods? Tracked
Was there not a modification required to the original KXV3 on the IF output,
a resistor change or something? It was in the back of my mind that I would
need to do this mod if I ever got a P3 or other panadapter. (Though
presumably the KXV3A which is on its way to me with a KXV144 doesn't need
any
Yes, there was a mod and you get the resistor needed with the P3. You are
correct though, the KXV3A does not need the mod.
73,
Don, WB5HAK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
There is a single resistor mod on the RF board for greater IF gain for the P3.
No mod to the KXV3 or KXV3A, but the P3 does use the IF out connector, so one
of the KXV3 or KXV3A is used.
Dick, K6KR
On Dec 27, 2010, at 14:36, Julian, G4ILO julian.g4...@gmail.com wrote:
Was there not a
9 matches
Mail list logo