Chuck Guenther (NI0C) wrote ...
I finally got around to installing my 700 Hz CW roofing filter
Just to clarify, Chuck is referring to a 700 Hz filter from the 2010 batch,
rather than
the current batch which is due to arrive in a couple of weeks. There are
still 2 filters
available for
It seems like some time since the suggestion was made that we might expect
some new firmware post 4.22, and yet I've seen no mention of it either here
or on the Elecraft website.
Have I missed something somewhere, or shall I find it under the tree in the
morning?! Wayne, do you prefer brandy or
Float new firmware before the Christmas and New Year's holidays? Then
you might have to be doing firmware fixes over the holidays. January
be here plenty fast.
73, Guy.
On Fri, Dec 24, 2010 at 4:41 PM, Stephen Prior s...@sjprior.fsnet.co.uk
wrote:
It seems like some time since the
Next week.
Happy holidays to all from Belmont, CA --
Wayne
N6KR
On Dec 24, 2010, at 6:23 PM, Guy Olinger K2AV wrote:
Float new firmware before the Christmas and New Year's holidays? Then
you might have to be doing firmware fixes over the holidays. January
be here plenty fast.
73, Guy.
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of PAUL VANOVEREN
Sent: Wednesday, September 10, 2008 5:55 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 new firmware ?
I see from Wayne that MCU 2.38 and DSP 1.90 is available.. When I
connect to the utility I see the following
I see from Wayne that MCU 2.38 and DSP 1.90 is available.. When I connect
to the utility I see the following.
Installed Available
MCU 2.02 2.02
FPF 00.02 00.02
Paul,
You're apparently forgetting to download the new firmware into the file folder
that is accessed by the Elecraft K3 Utility. Don't forget to unzip the
downloaded file.
73,
Chuck NI0C
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
OK guys, I have no idea what I'm doing wrong but I saw that a new beta
FW release is out there but my K3Utility program can't seem to find it.
It downloads one file, K3UtilityVersionInfo.txt, and then says
Ready. I'm currently on uP 2.02 and that's what the utility says is
available as
http://www.elecraft.com/K3/k3_beta_release_instructions.htm
Dick, K6KR
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Fred Jensen
Sent: Wednesday, June 25, 2008 4:10 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 - New Firmware
OK guys, I have
Since the original K3 manual was printed, many
important new setups have been added to the K3
firmware that are shown and described in separate
documents.
There is now a wiki page that contains the cumulative
options to date. Each setup option can be expanded on
by users of the K3 reflector. Have
This site must be the world's capital of Abbrevations or ABBS. Left me in the
dust.
Charles Harpole
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
hi Wayne,
On 4 May 2008 at 13:35, wayne burdick wrote:
I'll do another posting as soon as revised firmware is ready. Thanks
for all the quick feedback.
thank you for the quick help and open communication on the list.
this is unusual these days but gives me a good feeling.
A great radio
Just a quick heads-up:
Now that the new firmware has been released to much wider distribution,
we've been notified of some issues we hadn't discovered earlier. The
following items will be addressed very shortly with another release:
1. FM deviation set too high.
2. Selecting AFX (BIN mode)
wayne burdick wrote:
...
4. CONFIG:TXG VCE menu entry appears to be non-functional. This menu
entry is needed to establish a higher drive level for voice vs. CW modes.
I installed the firmware updates and appreciate the improvements and new
features. Thanks.
Here are a couple of
GREAT SCOTT !!!
the new version of the narrow filter; at the noise floor the filter is half the
width it was before as seen in spectrogram. Not only that, the top of this new
filter, even at 50 cycles wide, is FLAT topped. I imagine that is why it
doesn't ring, and it doesn't.
I listened
Stop it! You're making me drool all over my keyboard!
Bill W5WVO
K3 in Febr... uh, Mar... uh, April, maybe...
cloud runner wrote:
GREAT SCOTT !!!
the new version of the narrow filter; at the noise floor the filter
is half the width it was before as seen in spectrogram. Not only
that, the top
16 matches
Mail list logo
