Re: [Elecraft] K3 push buttons no longer workin

2019-11-18 Thread Rick Bates, NK7I
You might be able to use a radio control program (HRD being one) since the controls simply tell the CPU what to do.  Not ideal but you'd be on the air again while researching a proper fix. 73 Rick NK7I On 11/18/2019 11:46 AM, Mpridesti via Elecraft wrote: Hate to have to send it back to the

Re: [Elecraft] K3 push buttons no longer workin

2019-11-18 Thread Keith Trinity WE6R
It is probably a bad encoder. Leaky pushbutton disrupting the switch matrix. To confirm, try the switchtest in the config menu. If switchtest is OK, some modes don't allow you to change the width, try SSB I believe. If it is the encoder, replace all 4. If it is an older radio, send it in and

Re: [Elecraft] K3 push buttons no longer workin

2019-11-18 Thread Mpridesti via Elecraft
t; -Original Message- > From: elecraft-boun...@mailman.qth.net On > Behalf Of Christian Friess > Sent: Monday, November 18, 2019 18:15 > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 push buttons no longer workin > > In my case the 4 rotary encoders had to be replaced. >

Re: [Elecraft] K3 push buttons no longer workin

2019-11-18 Thread Mpridesti via Elecraft
Hate to have to send it back to the factory at this time of the year. Is there a work around? Regards, Mark, K1RX > On Nov 18, 2019, at 1:15 PM, Christian Friess wrote: > > In my case the 4 rotary encoders had to be replaced. > > 73 de Chris, DL2MDU > >> Am 18.11.2019 um 17:44 schrieb

Re: [Elecraft] K3 push buttons no longer workin

2019-11-18 Thread Don Wilhelm
Mark, Replace the encoder with its built-in switch. While you are at it, you may as well replace all 4 of them. 73, Don W3FPR On 11/18/2019 11:44 AM, Mpridesti via Elecraft wrote: Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW. Did a

Re: [Elecraft] K3 push buttons no longer workin

2019-11-18 Thread markmusick
] K3 push buttons no longer workin In my case the 4 rotary encoders had to be replaced. 73 de Chris, DL2MDU Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft: > Specifically the front panel button to select shift Lo Hi Width do not > toggle. Only stays in FC or BW. > > Did a fir

Re: [Elecraft] K3 push buttons no longer workin

2019-11-18 Thread Christian Friess
In my case the 4 rotary encoders had to be replaced. 73 de Chris, DL2MDU Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft: Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW. Did a firmware reload (newest from web) and no change.

[Elecraft] K3 push buttons no longer workin

2019-11-18 Thread Mpridesti via Elecraft
Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW. Did a firmware reload (newest from web) and no change. What’s the fix? Regards, Mark, K1RX __ Elecraft mailing list Home: