Hi All,
I have my KAT100 KPA100 in a separate EC2 enclosure. And I have been
QRP for a while.
The feeder to my dipole antenna on the roof was made of two RG-58 cables
with BNC connectors.
The connection between these two cables was not properly made since I
had used ordinary electrical
:41 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KAT100 Troubleshooting
Hi All,
I have my KAT100 KPA100 in a separate EC2 enclosure. And I have been
QRP for a while.
The feeder to my dipole antenna on the roof was made of two RG-58 cables
with BNC connectors.
The connection between
Rolf,
The display of 20 watts is correct - the firmware limits the KPA100
power to 20 watts when tuning at high power.
The fact that it appears not to complete the TUNE is a potential
problem, but if you have replaced the diodes in the KAT100 and they are
still good, *and* it tunes
3 matches
Mail list logo