t; VSWR without any ATU inductors or capacitors.
73 de Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Brian
F Wruble
Sent: Thursday, June 2, 2016 18:52
To: Elecraft Reflector <elecraft@mailman.qth.net>
Subject: [Elecraft] KAT500 &
Yes,
Bob, N6CM
On Thu, Jun 2, 2016 at 6:51 PM, Brian F Wruble wrote:
> My KAT500 utility program shows the tuned VSWR, generally a low number,
> and it also shows "Bypass SWR". Is that a reading of the feed line SWR
> without the tuner in the circuit?
>
> TNX. 73 de Brian
My KAT500 utility program shows the tuned VSWR, generally a low number, and it
also shows "Bypass SWR". Is that a reading of the feed line SWR without the
tuner in the circuit?
TNX. 73 de Brian W3BW
Brian F. Wruble, C.F.A.
Sent from my iPad Air 2
Hi,
No compensation is necessary. I have a Ridge Equipment dummy load on one of
my ports and it measures 1.02 with an LP-100A in SWR in bypass mode on 10m.
AB2TC - Knut
Dick Dievendorff-4 wrote
The former.
Dick, K6KR
Sent from my iPhone
On Aug 9, 2015, at 18:17, Jim Miller lt;
I once did a TDR measurement of the distance between the input and
output in bypass mode.
It comes out to be about 18.Interesting, I would have expected
much less.
73 de Brian/K3KO
On 8/11/2015 16:55 PM, ab2tc wrote:
Hi,
No compensation is necessary. I have a Ridge Equipment dummy load
When the KAT500 is in Bypass are all elements really bypassed?
Or are they bypassed with compensation for the internal paths?
Is there an internal bypass calibration required?
73
jim ab3cv
__
Elecraft mailing list
Home:
The former.
Dick, K6KR
Sent from my iPhone
On Aug 9, 2015, at 18:17, Jim Miller j...@jtmiller.com wrote:
When the KAT500 is in Bypass are all elements really bypassed?
Or are they bypassed with compensation for the internal paths?
Is there an internal bypass calibration required?
7 matches
Mail list logo