On 6/1/2019 10:21 AM, Jack Brindle via Elecraft wrote:
In other words, leaving the aux cable connected from the K3 to the KAT and KPA
may have some unintended consequences.
Right. I've never used an AUX cable between any of my Elecraft gear,
only the keying interrupt lines (as RCA-RCA cables)
On 6/1/2019 6:37 AM, Michael Gillen via Elecraft wrote:
Sound correct?
Right.
73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@m
I use two transceivers with my station. The K3S, P3, KPA500 and
KAT500. Also have a Tentec Eagle which is the 2nd transceiver. I have
a A / B switch in the coax line between the transceivers output and the
input to the KPA500. The AUX buss is connected in the K3S
configuration. The Eagle
No, but it does respond to frequency changes from the K3 which may provide some
strange results. If the K3 is on and you spin the big knob while using the
KWM2, the KAT will respond to the K3’s QSY. If you change bands on the K3, BOTH
the KAT and the KPA will also change bands. And (most strange
Nr4c
Sent: Saturday, June 1, 2019 9:18:41 AM
To: Bob McGraw K4TAX
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 question: using the KAT500 with multiple
transceivers using a coax switch
The KAT500 has no clue what provides the RF when sensing the Freq.
Sent from my iPhone
...nr4c
The KAT500 has no clue what provides the RF when sensing the Freq.
Sent from my iPhone
...nr4c. bill
> On Jun 1, 2019, at 11:18 AM, Bob McGraw K4TAX wrote:
>
> The KAT500 will sense the RF and apply the previously stored matching
> elements for the frequency.
>
> 73
>
> Bob, K4TAX
>
>
>>
The KAT500 will sense the RF and apply the previously stored matching
elements for the frequency.
73
Bob, K4TAX
On 6/1/2019 8:37 AM, Michael Gillen via Elecraft wrote:
Greetings all and thank you for a great list with lots of great information!
Help me understand something on the KAT500. I
Greetings all and thank you for a great list with lots of great information!
Help me understand something on the KAT500. I have the Elecraft “Dream” setup
as I think it is called with the K3s, KAT500, KPA500, and P3. I love it.
I have trained the KAT500 according to instructions.
My question is
8 matches
Mail list logo