The KAT100 needs both the 12 volt power connection *and* the 12CTRL
signal from the K2 to power itself on.
So yes, you need the control cable plugged from the base K2 (or KPA100)
to the KAT100 before you will see any lights. The control cable is
shown in the KAT100 manual.
73,
Don W3FPR
On
Made the same mistake. You need both power cables hooked up: one to the KAT100
and one to the K2. You can use a 'Y' cable to power both.
Brian
KB1VBF
Sent from my iPad
> On May 25, 2016, at 8:47 PM, mjpilgrim wrote:
>
> I recently purchased a used KAT100. Not sure
I recently purchased a used KAT100. Not sure how to interpret a possible
failing condition at Power UP time. Stupid Question: If I simply connect
12VDC to the DC power input jack on the KAT100 (without the K2 physically
connected), should I see the lights eliminated on the KAT100? Reason I ask
3 matches
Mail list logo