I initially sent this to just Pete, but found other posts:
The intent is that the ATU IN LED be illuminated when the ATU is switched in
with the ATU MODE button, and the ATU BYP LED is illuminated when the ATU MODE
is BYPASS and also when the current ATU setting, with ATU IN, is “bypassed”.
"If someone else has a better way of explaining it, I would like to see it."
Don't have a KPA1500 but I do have a KAT500. For that tuner there is a clear
distinction between being in BYPASS mode, and not being in BYPASS mode but
having the ATU relays in the bypassed position. The bypass
: [Elecraft] KPA-1500 ATU BYP light always on
About:
"Just got my KPA-1500, and it seems to work great except that the ATU BYP light
is always illuminated. The ATU operates normally when I light the IN light
with the ATU Mode switch and apply drive. I can't find anything in the manual
First, make sure you have the latest firmware, 2.0, loaded in the KPA1500.
Secondly--no offense intended--what is the bypass SWR of the antenna? If
it is lower than the tuning threshold set in the KPA1500 utility, the
KPA1500 ATU will stay in BYPASS mode even after a tuning cycle when the ATU
is
About:
"Just got my KPA-1500, and it seems to work great except that the ATU BYP
light is always illuminated. The ATU operates normally when I light the
IN light with the ATU Mode switch and apply drive. I can't find
anything in the manual about this."
Can anyone clarify?
73, Pete N4ZR
Just got my KPA-1500, and it seems to work great except that the ATU BYP
light is always illuminated. The ATU operates normally when I light the
IN light with the ATU Mode switch and apply drive. I can't find
anything in the manual about this.
Can anyone clarify?
--
73, Pete N4ZR
Check
6 matches
Mail list logo
