Jack, I finally have some good data on my problem whereby I can’t get full output from the KPA500 on 6M. As you might remember, as I raise the drive and get beyond about 200 watts out, I get a HI SWR fault. I’m sure now that it’s a K3S problem. Someone on the Elecraft list suggested that the K3S might be generating a spurious frequency that would confuse the KPA. To test this, I brought over an ICOM IC-706MKIIG and hooked it to the KPA. No problem at all getting full power out! Additionally, the KAT500 tunes the beam to 1:1 with the ICOM driving the KPA. With the K3S connected, the KAT500 tunes to about 1:8:1. The KAT500 should not operate any differently with different driving rigs. I’ve tried different jumpers between the K3S and the KPA with no difference.
Carl Yaffey K8NU Recording studio. cyaffeyno_s...@gmail.com 614 268 6353, Columbus OH http://www.carl-yaffey.com http://www.grassahol.com http://www.bluesswing.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com