Tried a power-cycle?
73 de M0XDF, K3 #174
--
Experience is that marvellous thing that enables you to recognize a mistake
when you make it again. -Franklin P. Jones
On 4 Feb 2010, at 00:57, Paul VanOveren wrote:
Tonite when I entered the CONFIG MENU, the display reads,Auto and KAT3
and
Tonite when I entered the CONFIG MENU, the display reads,Auto and KAT3
and I can not change it with the B vfo knob... in the MAIN MENU, it reads
Auto and some funny marks in the b vfo displayhelp !!!
Paul VanOveren
__
Don Wilhelm wrote:
I only know of one other person who leaves their K2 powered on all
the time - and Steve follows this reflector, so perhaps he will
provide his experience.
I don't yet, but I was considering leaving mine on 24/7 with some
self-written software to scan a few beacon frequencies
For the last 6 months, K2 #4913 has performed almost flawlessly - almost.
Several times, I've returned to the shack and turned up the AF gain to find
that the XFIL setting had changed.
See, I never turn 4913 off - I just put all the controls and filters to a
default setting, stow the
mic and
Ken,
I can only guess, but that kind of behavior strongly suggests an
intermittent connection (read = bad solder joint) somewhere. I only know of
one other person who leaves their K2 powered on all the time - and Steve
follows this reflector, so perhaps he will provide his experience.
73,
Don
5 matches
Mail list logo