Re: [Elecraft] No power out and no receive

2015-09-30 Thread John Lemay 
If there is no receive capability at all on the radio it could be quite a
serious fault - either with the radio or the feeder or aerial.

I'd suggest that under these circumstances trying to transmit is a daft
idea. Rigs these days are pretty well protected, but not completely
foolproof.

John G4ZTR

-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of way235
Sent: 30 September 2015 04:52
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] No power out and no receive

I also tried ant 2 since it has the ATU but I have the same problem on both
ant connectors.
No power out and no RX just noise.



--
View this message in context:
http://elecraft.365791.n2.nabble.com/No-power-out-and-no-receive-tp7608524p7
608527.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@carltonhouse.eclipse.co.uk

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No power out and no receive

2015-09-30 Thread way235 
Ok, got it working. I have two KSNY3 boards on main and SUB receivers.  The
led was on for the SUB but the LED on the main was off.  I switched the
boards and it started working.  Must have been a loose connection on one of
the cables???



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-No-power-out-and-no-receive-tp7608524p7608558.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No power out and no receive

2015-09-30 Thread Ron D'Eau Claire 
Anything that disables the synthesizer will produce those symptoms. Check
the TMP cables that connect the KREF3 to the KSYN3 and to the K3 RF board to
make sure they are all properly seated. If your K3 has the newer KSYN3A
synthesizer board (mounted on the front panel shield with the KREF3) you
should see a green LED glowing brightly when you look down from the top
(it's on the back of the board near the top edge). If it's blinking the
synthesizer is NOT locked and will produce the symptoms you are
experiencing. Normally it will be glowing steadily. 

73, Ron AC7AC



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No power out and no receive

2015-09-30 Thread Eric Swartz - WA6HHQ, Elecraft 
One correction to Ron's posting:  The Sub Rx's  KSYN3a (if you have the 
sub-receiver installed) may have a blinking green status light until the sub is 
actually turned on for the first time from the K3 front panel.


73,
Eric
/elecraft.com/

On 9/30/2015 8:03 AM, Ron D'Eau Claire wrote:

Anything that disables the synthesizer will produce those symptoms. Check
the TMP cables that connect the KREF3 to the KSYN3 and to the K3 RF board to
make sure they are all properly seated. If your K3 has the newer KSYN3A
synthesizer board (mounted on the front panel shield with the KREF3) you
should see a green LED glowing brightly when you look down from the top
(it's on the back of the board near the top edge). If it's blinking the
synthesizer is NOT locked and will produce the symptoms you are
experiencing. Normally it will be glowing steadily.

73, Ron AC7AC



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric.swa...@elecraft.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No power out and no receive

2015-09-29 Thread Don Wilhelm 
Which Elecraft transceiver?  Kit or factory built?  Was it working 
before or has it never worked properly?


73,
Don W3FPR

On 9/29/2015 11:29 PM, way235 wrote:

I have noise on all bands but don't hear any signals at all.
I have a TX light when keyed and can see the meter move when I speak into
the mic but I have no power output.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/No-power-out-and-no-receive-tp7608524.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3...@embarqmail.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No power out and no receive

2015-09-29 Thread David Pratt 
What is the serial number of your transceiver and do you have a callsign?  
Also, what revision of the manual do you have? With that information there are 
lots of people on here able to help you.

73 de David G4DMP

On 30 Sep 2015 04:29, way235  wrote:
>
> I have noise on all bands but don't hear any signals at all. 
> I have a TX light when keyed and can see the meter move when I speak into 
> the mic but I have no power output.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No power out and no receive

2015-09-29 Thread way235 
I also tried ant 2 since it has the ATU but I have the same problem on both
ant connectors.
No power out and no RX just noise.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/No-power-out-and-no-receive-tp7608524p7608527.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com