not practical to screen this !
Regards
John G4ZTR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Stephen Prior
Sent: 06 July 2011 21:29
To: K7WIA
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 RFI
Ed,
Listening
...@mailman.qth.net] On Behalf Of Stephen Prior
Sent: 06 July 2011 21:29
To: K7WIA
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 RFI
Ed,
Listening on a TH-D72 on about 137MHz, yes the noise from the P3 is indeed
loud. However, by the time I have more than a metre or so separation
John Lemay wrote:
Good morning all
I raised the issue of noise coming from my P3 several months ago.
It is noticeable on 2m, using an EME array that is about 50ft from the
rig. There is a combination of azimuth and elevation in which the array
looks directly at my shack and under those
On 7/7/2011 3:19 AM, Ian White GM3SEK wrote:
It seems rather unlikely to be a radiating EM field launched directly
out of the panel cut-out of the P3.
I tend to agree with Ian's advice, and with that you received from
Elecraft. Following up on it -- suitable RF chokes for 2M would be Fair
FWIW
This morning we had a very good opening on 6 meters to the east coast Maine
down to Florida from the PNW,
When the band died, I thought it would be a good time to go out and snoop
the neighborhood for the line noise source that bugs me, So i got out my
MFJ Line Noise Meter, put it on the
Ed,
Listening on a TH-D72 on about 137MHz, yes the noise from the P3 is indeed
loud. However, by the time I have more than a metre or so separation
between the P3 and the handie, the noise drops below the handie's squelch
threshold, so for me at least, it's a very localised phenomenon.
The
List...
I am using a K3 with an XV144 to a TE brick, to a 5 el beam at 35
'. The P3 is atop the K3. There is no discernible change in receiver
noise level at the K3 listening on 50.100 when the P3 is on vs. off. I
also have an ICOM 910H sitting about 1.25 feet from the P3, and
listening
On 7/6/2011 1:39 PM, John Ragle wrote:
I am using a K3 with an XV144 to a TE brick, to a 5 el beam at 35
'. The P3 is atop the K3. There is no discernible change in receiver
noise level at the K3 listening on 50.100 when the P3 is on vs. off.
Unless something is badly broken (bad cable shield,
On 7/6/2011 5:10 PM, John Ragle wrote:
Sorry, but your test is a test that has NO meaning whatever. Does a
tree falling the forest make a noise if no one is there to hear it?
No, it is considerable meaning. The question was, is the P3 a noise
source? The test I described is a good way to
9 matches
Mail list logo