Head's up on the PR6 6-Meter Manual. On page 3 of the manual it states that
the white control wire from the PR6Pre-amp should go to Pin 6 of the ACC
connector. However, the drawing actually shows that wire going to Pin 11,
which is highlighted.
I ordered one anyway!
Terry, W0FM
The manual I uploaded last night was an early revision. The Rev A PR6
manual is now on the web site. If it has the same error, we'll correct
it immediately (and well before they ship ;-)
See:
http://www.elecraft.com/manual/PR6%20Owners%20Manual%20Rev%20A.pdf
73, Eric WA6HHQ
Terry
A-yup! The correct pin is 6. A corrected manual will be on the web site
soon.
The PR6 comes with a pre-assembled cable to connect it to the power and ACC
output on the K3.
The connection pin was shown for those who will want to remove the connector
and add the control wire to an existing
I thought that the correct pin was 11.
Bob
On Thu, Oct 23, 2008 at 10:17 AM, Ron D'Eau Claire [EMAIL PROTECTED] wrote:
A-yup! The correct pin is 6. A corrected manual will be on the web site
soon.
The PR6 comes with a pre-assembled cable to connect it to the power and ACC
output on the K3.
Yes, and that's how the manual now reads.
There's an old saying out here in the west, He who shoots quickly from the
hip will shoot himself in the foot.
Some days I'm an expert at that.
The correct pin is the DIGOUT1 signal at pin 11 as shown in the
illustration. The text was wrong.
The
5 matches
Mail list logo
