Hi Everybody;
Don just reminded me to check the math in the DL1 Manual and update it if
necessary. Good Idea!
I also got out the W1 and checked my K2 power output Vs the W1 and my
DVM voltage reading at the DL1 test points. They all read about the
same *within
10% but*
which reading would be
Bob,
The answer is - It all depends ... -- read on if you want the rest of
the story.
I constantly rely on the RF voltage produced across a known accurate 50
ohm resistor for my power measurement calculations, so that is the
method I depend on.
The W1 is quite accurate, but there is one
2 matches
Mail list logo