Re: [Elecraft] Settings for CW decoder in K3

2019-05-26 Thread Don Wilhelm
A moderate bandwidth like 400 Hz will also help provide good decoding. 73, Don W3FPR On 5/26/2019 9:51 AM, Nr4c wrote: First, press SPOT to “ zero-beat” the signal. Then adjust the threshold so that the CWT bar is flashing with the signal. This should work. Sent from my iPhone ...nr4c. bill

Re: [Elecraft] Settings for CW decoder in K3

2019-05-26 Thread Nr4c
First, press SPOT to “ zero-beat” the signal. Then adjust the threshold so that the CWT bar is flashing with the signal. This should work. Sent from my iPhone ...nr4c. bill > On May 25, 2019, at 11:03 PM, Ignacy wrote: > > I am trying to use the CW decoder in K3 to help copy fast exchanges.

[Elecraft] Settings for CW decoder in K3

2019-05-25 Thread Ignacy
I am trying to use the CW decoder in K3 to help copy fast exchanges. It is hit and miss. The CW decoder in KX3 is better and so is the external CW Decoder by WD6CNF (spkr to MIC). Ignacy, NO9E -- Sent from: http://elecraft.365791.n2.nabble.com/