I wanted to drop a note to the Elecraft folks to thank them for all the
good work they did getting ready for the "event". It was good to meet a
few folks I had not, and good to get a few answers I needed. The K4
presentation was good, and glad you will have it on YouTube later...
So...
I just wanted to say thank you to Elecraft. I built / have the KX1, KX3 and
K2, all fine rigs. But I relocated m K2 up at our rustic, small, cabin in
the high sierras, as my "rig in residence". It had been a while since I
used the old K2 as the KX3 has seen daily use in the WA6ARA shack at home.
I had no plan to have digital capability, but it's sure nice that the K3
(and KX3) have digital capability. W1AW/9 recently posted to LoTW, three
RTTY and one PSK31 QSOs confirmed. A nice group of digital QSOs on my
LoTW QSO page this morning. And thank you W1AW/ operators, it's been a
fun year.
I wanted to thank everyone for all the direct responses I received while
pondering my K1 Rx issues.
After much poking around and pondering - I decided I could too easily get
in deep and the radio is in the capable hands of Don (W3FPR) for a complete
checkout, and I can't wait to get her home and
Thanks, David -- we greatly appreciate these comments and will forward
them to our staff.
Of course we also appreciate the steady flow of enthusiastic critique,
which appears to be a sustainable resource :)
73 and Happy Holidays,
Wayne
N6KR
David McAnally wrote:
I would like to share
I would like to share my thanks and appreciation to Elecraft employees for
their excellent products and support. I am a relatively new K3 and KPA500
kit owner. I was happy with my purchase during assembly, and have been
happy ever since. I have a KAT500 kit on order now too.
I shared my
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I want to personally thank the following folks at Elecraft:
April - for getting my order correct even after I changed it via email
twice. Thanks for putting up with me on that.
Each of the following insured all the correct hardware and parts were
included in my kit. I was not missing
I received my K3 today at 8:00am.
I took and hooked my laptop up to it and saved the new configuration file.
I thought I would try it as it came from the factory.
I was on 30 meters and heard a cw signal. I don't know much about cw,
between cw and a hole in the ground, I could tell you which one
Thanks to Elecraft for providing 50 to 60 hours of great fun and
entertainment with some trepidation while building my new K2 transceiver.
Everything went well in the first phase of the build, only to be challenged
with a few issues in phase II. After about 5 hours of troubleshooting with
the
I just wanted to share my experience with a KX1 that I borrowed from a friend.
I took this KX1 rig with me when I went to the Philippines. I did a bit of
traveling around the northern part of the country.
The rig that I borrowed had 80/40/30 and 20 meters available. However, things
were
Ron D'Eau Claire wrote:
2) Some claim off-line posts reduces the number of messages, but my
experience suggests that just the opposite is true. For every question
asked, there are several wondering the same thing. One answer on the
reflector answers them all and often even brings up
Dear all,
I just wanted to say thank you to everyone on the reflector list that has
taken the time to answer my questions. It's this level of support and
interaction that I really appreciate and enjoy. This reflector group played
a huge role in helping me decide what my next rig should be,
Thanks Jim!
We really appreciate your support and vote of confidence.
73,
Eric WA6HHQ
Elecraft
_..._
-Original Message-
From: James Sarte kc2...@gmail.com
Date: Wednesday, Feb 11, 2009 3:28 pm
Subject: [Elecraft] Thank you Elecraft reflector group!!!
To: elecraft@mailman.qth.net
On Wed, 11 Feb 2009 18:28:28 -0500
James Sarte kc2...@gmail.com wrote:
Dear all,
I just wanted to say thank you to everyone on the reflector list that has
taken the time to answer my questions. It's this level of support and
interaction that I really appreciate and enjoy. This
: [Elecraft] Thank you Elecraft reflector group!!!
On Wed, 11 Feb 2009 18:28:28 -0500
James Sarte kc2...@gmail.com wrote:
Dear all,
I just wanted to say thank you to everyone on the reflector list that has
taken the time to answer my questions. It's this level of support
] On Behalf Of Ron D'Eau Claire
Sent: Wednesday, February 11, 2009 6:59 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Thank you Elecraft reflector group!!!
Excellent reasons to post an *answer* ON the reflector.
1) Without going into people's motives, from time to time someone will make
It's also hugely important that the Owners of Elecraft, and
principal designers of the radio, regularly read the reflector, pay
attention to their customers problems, needs, and desires, and
actively respond both with solid answers, and with solutions in the
form of the evolution of the radio!
: [Elecraft] Thank you Elecraft reflector group!!!
Sent: Feb 11, 2009 6:42 PM
On Wed, 11 Feb 2009 18:28:28 -0500
James Sarte kc2...@gmail.com wrote:
Dear all,
I just wanted to say thank you to everyone on the reflector list that has
taken the time to answer my questions. It's this level
Hello All:
Just to let you know K2, s/n 6301 is now complete! Final Tuning of filters
and Antenna Tuner to be completed this week, when my elmer returns from
Orlando. It will be several weeks for me to put up a G5RV and perfect my
cw. But I hope to be on the air by March 10.
Over the past
: [Elecraft] Thank you Elecraft
Hello All:
Just to let you know K2, s/n 6301 is now complete! Final Tuning of
filters
and Antenna Tuner to be completed this week, when my elmer returns from
Orlando. It will be several weeks for me to put up a G5RV and perfect my
cw. But I hope to be on the air
21 matches
Mail list logo
