Charlie:
I have done this 2 days ago and the same thing happened to me (I am still on
part II).
L34 is on top of the can for the peak signal/noise.
I cannot give you any technical explanation for this but I am sure some of
the guys on the Reflector will.
I will be liestening, that is for
Charlie
Here is a technique I used to adjust L34 - While performing the I.F.
Amplifier Alignment section of Alignment and Test Part II, I used
Spectrogram (just about any program that displays the received signals
should work). I had meant to put this hint on the reflector long ago and
keep
Charlie
Here is a technique I used to adjust L34 - While performing the I.F.
Amplifier Alignment section of Alignment and Test Part II, I used
Spectrogram (just about any program that displays the received signals
should work). I had meant to put this hint on the reflector long ago and
keep
And if you wind the slug out a bit further?
It's not normally necessary to stop winding just because the slug is
level with the top of the can.
Or possibly you've got a too high value capacitor across the coil?
Charlie, W0YG wrote:
Actually, I cannot go through the peak as it just gets
4 matches
Mail list logo
