Mike, Yes, ignore that inductor change. The inductor necessary depends a lot on the crystal that shipped with your kit, and the proper value has changed from 10 uH to 12 uH and back a few times over the life of the K2. Put in the 10 uH (or re-use the one that is currently installed) and wait until you do the PLL range test before becoming concerned.
Also relevant - check th eElecraft Builder's Resource Page on the Elecraft website and you will see a new note stating that a PLL range of 8.8 to 18 kHz is an acceptable range. 73, Don W3FPR > -----Original Message----- > > I recently purchased the K2 PLL Temp Comp mod kit, and it came with Rev > D (3 Feb 04) instructions. A couple places in the instructions mention > replacing L31 (originally 10uH, which my rig has) with a 12 uH inductor. > > Yet the parts list states it should be a 10 uH, and I was shipped a 10 uH. > > Which is right? Considering the instruction sheet is over a year old, I > would have thought any typos would have been caught by now. > -- > 73, > Mike Boice, KW1ND > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com