[EMAIL PROTECTED] wrote:
Could it be that the sort of folks who really want to be hams are looking for
a
challenge, and not the easiest path?
73 de Jim, N2EY
___
Exactly right Jim,
73 Deni GM3SKN / F5VJC
K21188
.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
--
View this message
Elecraft web page: http://www.elecraft.com
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
--
View this message in context:
http://www.nabble.com/K3-SSB-Noise-Reduction-tp16183793p16188181.html
Sent from the Elecraft
No you are not alone, I see the same thing here on my scope. K3 #325
73, Deni
F5VJC
Hello Don,
The low SSB peak power output (approx, 50%) when Tune puts out full power is
a textbook case of what I have found. I can also confirm your other
findings (ie., the 100 watt SSB spike at beginning
Or you could forget about all the expensive mechanical junk, hacksaw
blades etc and just build one of these cool devices.
http://www.cwtouchkeyer.com/
Works perfectly, and you can customise it as you wish.
73,Deni
F5VJC
2008/4/24 Niel Skousen [EMAIL PROTECTED]:
there was a small pcb based
be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly
the KXV3 RXA mod. All now back together and working just fine.
Waiting for the second RX now and debating filter options.
73
Deni, F5VJC
Went to install the HAGCMDKT kit on #311. Interesting but all was already
done except for shorting R33 and R40. Maybe there were interim fixes for
this mod
this issue but it works for me...
Love this K3
73, Deni
F5VJC
wayne burdick wrote:
K3 beta-test firmware revision 2.10 is now available. Full details
appear below and in the release notes.
The use of beta-test firmware is encouraged, but optional. Please send
any problem reports to [EMAIL
- . ... -
--
View this message in context:
http://www.nabble.com/Test-tf4949914.html#a14172447
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
Anyone care to sell their KPA 100 plus KAT 100 in an EC2 enclosure?
Otherwise would think about the KPA 100 top cover and separate KAT100 ATU.
Deni, F5VJC
K21188
-
73, Deni F5VJC
Yes I'm waiting for my K3 too...:confused:
--
View this message in context:
http://www.nabble.com/K2-PA
K3 /100 serial no. 325 arrived 1100 Jan 30th in Brittany France!
Build under way, Please Do Not Disturb :)
Thanks to all at Elecraft for this wonderful kit.
73, Deni
F5VJC
-
73, Deni F5VJC
Yes I'm waiting for my K3 too...:confused:
--
View this message in context:
http://www.nabble.com
F5VJC
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
--
View this message in context:
http://www.nabble.com/K3--325-Progress-tp15226242p15226242.html
Sent from the Elecraft mailing list archive at Nabble.com
Where can I get the new driver from Prolific? The link on the Ele Software
downloader site to Prolific seems to be unavailable to me. Anyone tried this
lately?
Thanks
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
later now I have the driver.
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
--
View this message in context:
http://www.nabble.com/Prolific-drivers--tp15247100p15247100.html
Sent from the Elecraft mailing list archive
overdriven in any way.
This assumes correct set up of TX passband and BFO, then the listening
tests as above.
Any other ideas?
--
73, Deni
F5VJC
For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
___
Elecraft mailing list
Worked Ducie on 7MHz SSB and CW, great signals ! 0500-0530 UTC
73, Deni
F5VJC
K2 1188 K3 325
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
--
View this message in context:
http://www.nabble.com/K3--325-%3C%3E-Ducie
some sort of
lookup list or auto crosscheck system?
I must have worked a few K3/s myself but apart from N1EU (a call I
recognise) I don't know who they were, but would like to.
Also worked VP6DX on a few bads now, CW and SSB.
The K3 is working soo well, thanks Elecraft.
73,Deni
F5VJC
K2 1188 K3 325
a C.O.R. but is there likely to be a damage potential here?
What is the best way to solve this problem? I can't move the antennas!
Fiters?
I have only tried this on 80M so don't know if the problem exists on other
bands. Any advice appreciated.
73, Deni
F5VJC
K21188 K3 325
-
73, Deni F5VJC
using Win XP Pro and I'd like to keep this.
Will Vista ever be OK?
Advice from you PC Gurus would be most welcome, what say?
Is the answer just more of everything, I wonder...
73, Deni
F5VJC
-
73, Deni F5VJC
K2 1188 K3 325
For a Ham Radio friendly holiday in France...
Visit
can someone advise precisely what cabling/connectors are
required to do this??
--
73, Deni
F5VJC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
?
--
73, Deni
F5VJC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
of physical
separation,
Advice pse?
--
73, Deni
F5VJC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Interesting discussion...I've ordered a Softrock Lite from Jack to use
as a Panadapter with my K3, when I get it.
Would anyone care to mention a suitable soundcard for my PC or what to look for?
--
73, Deni
F5VJC
___
Elecraft mailing list
Post
and trusty Weller but now want something better. I know
quite a few in this group use the Hakko so I would appreciate some
advice on iron tip sizes for SMT as well as the normal sizes.
Thanks.
73, Deni
F5VJC
___
Elecraft mailing list
Post to: Elecraft
Arghh What Hath Elecraft Wrought...
I'm building my K3!
73, Deni
F5VJC
On 04/06/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Just wondering...what percentage of K3s ordered are the kit form or factory
assembled? Mine is the kit version.
Doug
W6JD
On the subject of Anderson powerpoles, the only ones I see on Ebay are
45A are these compatible with the lower power ones too?
73 F5VJC
On 9/4/06, Vin Cortina [EMAIL PROTECTED] wrote:
Hi everyone.
To all who responded to my original query, thank you for the good advice. I
purchased 20 pair
Thanks Steve and and all for the info, placed an order for the WMR
4012 which includes the Powepole connectors.
73, Deni
F5VJC
On 9/5/06, Steven Pituch [EMAIL PROTECTED] wrote:
See
http://www.powerwerx.com/category.asp?CtgID=1001
For a good explanation.
I buy mine from them.
Steve, W2MY/5
- . ... -
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
these bits, and I
want to avoid buying any Junk !
Grateful for any advice, what to buy and where, off list is OK if you wish.
Thanks es 73
Deni
F5VJC
K3 325
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
I too would certainly prefer to deal direct with Elecraft in the US.
As a long time customer I have found their service and attention to
detail is second to none.
Deni
F5VJC, G3SKN, GM3SKN
On 29 May 2012 12:13, David Cutter d.cut...@ntlworld.com wrote:
I expect $ prices to appear as £. I'd
as my K2, I think!
73, Deni
F5VJC
K2 1188, K3 325
On 1 June 2012 20:02, Guy Olinger K2AV olin...@bellsouth.net wrote:
I agree. Put up firmware 4.51 on your K3 and re-evaluate. 73, Guy.
On Fri, Jun 1, 2012 at 1:45 PM, Nate Bargmann n...@n0nb.us wrote:
It may just be my perception, but the 4.51
It's clear my K2 battery is in need of replacement
I'm wondering if anyone has come up with an alternative to the
standard sealed lead acid as fitted.
Weight is not the main consideration but capacity and ease of charging.
Any thoughts?
73, Deni F5VJC
with the automated digital modes.
73, F5VJC
On 9 November 2012 06:17, eric manning emann...@cs.uvic.ca wrote:
CW is just another digital mode
Yes, and Rembrandt is just another painter,
Dizzy was just another trumpet player
a Porsche is just another car
a K3 is just another radio
.
These are apparently recommended for boat caravan etc deep cycle. An
extract from an ad is below.
Anyone any comments on these for this purpose.
Thanks, 73 F5VJC
The dual purpose XV battery range is original equipment on some of the
biggest boat manufactures in the world. With its twin marine terminals and
sealed
.
73, Deni F5VJC
On 10 December 2012 14:34, Mike K2MK k...@comcast.net wrote:
The hearing in my right ear is weak. I use the CM500 headset. Using just
the
Main RX, I find that my left ear is doing all of the heavy lifting. Lately
I've been using the SUB RX in Diversity (with the main antenna) so
some fun with this radio,
73 to all, Deni F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
time I will try my CM500 on the KX3 to see what that does.
Anyone else seeing lack of audio drive on their KX3?
73, Denis F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
advice on this, thanks.
73 F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Exactly,
Elecraft and Handie Talkies?
I don't think so... :)))
F5VJC
On 19 August 2013 20:41, w0...@aol.com wrote:
Eric/Wayne ...
Totally asinine idea, why enter a cheap market with a jillion competitors?
In a message dated 8/19/2013 1:30:31 P.M. Central Daylight Time,
elecraft-requ
save me from the unending 'Sorry for the Bandwidth'...
F5VJC
On 19 August 2013 00:26, Dennis L. Haarsager haarsa...@gmail.com wrote:
Would be great if, when replying to a post on this list, you snip out all
but the one post to which you're replying. This would be a great courtesy
to those
I think it's time for a K3 firmware update...
73, F5VJC
On 22 August 2013 23:25, Lee Buller k...@swbell.net wrote:
The K3 is a fine radio and not much could be added to such a
fine piece of work.
But, doing research on the internet I found that if you
could degauss the ion slip stream
absurd operating practices and language. Surely in this high tech film
industry there are switched on people who could advise and provide a more
realistic portrail of Amateur radio.
Ho Hum, then I guess it's only important to us wierdo Radio Hams !!
73 F5VJC
On 6 September 2013 10:24, AD6XY
, but has anyone any details on how to build such a splitter?
Core, windings etc.
Or why not just use a resistive splitter, too much insertion loss?
Anyone any ideas?
73, Deni F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Thanks to all who replied, I now have many ideas and info to work with..
73, Deni F5VJC
On 11 September 2013 22:20, F5vjc foxfive@gmail.com wrote:
I'd like to build an RF Splitter for my K3 to use my RX loop antenna for
either for diversity reception, connected to AUX RF (BNC) or use
Surplus to my K3 I have a 200Hz 5 Pole filter, offset -0.92
Sell in Europe for £40 or Euros 50 post inclusive.
73 F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
This Filter has been sold, thanks all for inquiring.
73, Deni F5VJC
On 19 September 2013 06:55, F5vjc foxfive@gmail.com wrote:
Surplus to my K3 I have a 200Hz 5 Pole filter, offset -0.92
Sell in Europe for £40 or Euros 50 post inclusive.
73 F5VJC
The magic INRAD 700Hz 8 Pole inobtanium filter ! Oh come on...
On 3 October 2013 00:51, Gary W. Hvizdak gary.hviz...@cfl.rr.com wrote:
INRAD reports that batches four and five are now in US customs! These
special-order filters have been backordered since early July and most of
them have
Anyone interested in the KX3 SideKX, take a look on my QRZ page.
73, F5VJC
On 9 October 2013 16:05, Peter Eijlander (PA0PJE) pa0...@xs4all.nl wrote:
Me too:-)
73, Peter
Alan Hawrylyshen schreef:
I'll second this - I really love the SideKX product - I feel like the
radio is backpack
Powerpoles are entirely suited to purpose, if (of course) fitted correctly.
If connectors are pulling apart and they are fitted correctly, there is
obviously far too much pull stress on the connecting cable, which must be
relieved by some means.
Simple...'just do it'.
73, F5VJC
On 11
It's true !
Very good Phil...fascinating discussion.
73, F5VJC a Crimper
On 12 December 2013 02:39, Phil Hystad phys...@mac.com wrote:
My wife claims that ham radio operators only talk about boring subjects
like Antennas when they are on the air. I had to show her this latest
stream
Now that is a WOW moment !
73 de F5VJC
On 27 December 2013 14:38, Poul Erik Karlshøj (PKA) p...@telepost.gl wrote:
Despite whatever DX I have ever heard or worked, my WOW moment was when I
for the first time heard clear, distinct echoes with a delay of 240
milliseconds (corresponding
? Has placement of the KPA 500
w.r.t. the K3 been tested for any ill effects?
73, Deni
F5VJC
On 11 May 2011 07:49, Henk Remijn PA5KT pa...@remijn.net wrote:
Can we see some pictures of your setup?
Henk PA5KT
Op 11-05-2011 4:14, Dick Dievendorff schreef:
Just for operational convenience I'd
.
Elecraft, If it's really possible please do consider this change.
73, Deni
F5VJC
On 29 May 2011 21:33, Guy Olinger K2AV olin...@bellsouth.net wrote:
Exactly, which is what most people expect, without knowing that they
expect it, since 99% of ham receivers have done that since AGC first
showed up
Method: Paypal
No complaints here.
73, Deni
F5VJC
On 9 June 2011 22:43, David Lankshear d...@lanks.plus.com wrote:
I was just ordering Fred's book as a download, but stopped when lulu decided
to add VAT to the price.
Here, in the UK, books are exempt from VAT, so I tried to report
I have just opened a Mouser account in France and ordered a quantity
of, 2631803802 = FT240-3 Fair-Rite.
I hope they're OK. Thanks for the tip on the weight data Ian, I'll
check them when they arrive.
73, Deni
F5VJC
On 10 February 2012 23:55, Ian White GM3SEK gm3...@ifwtech.co.uk wrote:
Fred
Hi Ian,
Yes I have long wanted to have the availability of Mouser components.
There is FREE shipping over a minimum amount (around 80 Euros, I
think), I made this up easily by ordering 15 toroids and some push
button caps for my KPA 500.
73, Deni
F5VJC
On 12 February 2012 08:41, Ian White
stations and it's impossible to see and pick out (most times ) who
is actually working the DX.
The 2nd Rx is indispensible in my opinion and I'd rather have that than my
P3 any day.
Of course the P3 has other uses but for finding the Dx listening QRG?
73 F5VJC
On 9 March 2013 11:38, eric norris
to learn.
50 years in Amateur radio this year and still magic !
Thanks to Elecraft for rekindling that magic spark... but T9 of course !
73, Deni F5VJC
On 9 March 2013 20:17, Robert Garceau rgarc...@snet.net wrote:
I agree with working the edge of the pileups.
I have been to St.Croix
So...Just Learn Morse Code
73, Deni F5VJC
On 20 June 2013 00:00, Don Wilhelm w3...@embarqmail.com wrote:
And CW that is not perfectly sent will give most any CW decoder fits.
The best CW decoder is the human brain, it is more tolerant of
imperfections in timing and band conditions than any
internally in my K2 and recharge using
the supplied external charger?
Any advice appreciated, I have no experience of these batteries.
73, F5VJC
On 3 June 2013 15:36, John Payne payn...@comcast.net wrote:
Take a look at batteries intended for the RC crowd. Excellent prices and
chargers available
My line up is left to right too, KPA500, KAT500 above, then P3, K3, works
fine for me see QRZ.com.
73 F5VJC
On 20 June 2013 06:19, Tom H Childers n...@n5ge.com wrote:
The amp is on the left in my setup with the CW paddles just under the
Clarifier knob and the straight key just to the right
the connect port.
Is there a way to auto inhibit TX keying during PC bootup ( eg. placing the
TX into TEST mode)?
I believe there must be a way but can't find it as yet.
Thanks, 73 F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net
presses only the first. This is is
fine for me.
73 All, Deni F5VJC
On 25 June 2013 17:38, Cady, Fred fc...@ece.montana.edu wrote:
The other thing you can do is to go into the CW WGHT menu, tap the 4 key
and select VOX AUTOOFF. This turns VOX off when you turn the radio off and
so the PC won't key
, thanks to Elecraft and people like Tom.
Tom was really officially or unofficially a true member of the Elecraft Team.
I am sad to hear the news.
My condolences to his family and many friends, he will be really missed.
Deni
F5VJC
On 5 August 2011 23:48, Kevin Rock kev...@coho.net wrote
Has anyone in Europe imported the KPA 500 kit?
I'm particularly interested in importing to France.
What was the final cost plus all taxes and carriage?
Thanks,
73, Deni
F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net
The Heil Proset!
I bought one, ridiculous price for poor quality!
This is the only headset that has ever broken on me. The horrible very poor
quality Mic. plug was intermittent from day one, I replaced it.
I now use the Yamaha CM500, far superior in every respect.
73, F5VJC
On 18 March
, are there
any real keyboard to keyboard interesting QSO/s to be found, and if so
where?
73, F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Lots of very interesting and wise responses, thank you all.
It seems I am not alone :)
73, Denis F5VJC
On 21 March 2014 13:44, K5HM k5hm@gmail.com wrote:
I guess everyone is entitled to pursue the hobby the way they wish. The
fact
that it's a digital mode or CW really has nothing
professional.
73, Denis F5VJC
On 21 March 2014 16:39, Walter Underwood wun...@wunderwood.org wrote:
I like digimodes because the technology is awesome.
I'm amused when people consider them new, because they've been around
for roughly 50 years. As a rough date for the Dawn of Digimodes, I use
it all, it enhances my Ham
radio but never replaces it.
If I ever want 100% copy there are a plethora of chat methods available all
dependent on that invisible infrastructure of course...
73 et ZUT, F5VJC :)
On 21 March 2014 22:28, mcduf...@ag0n.net wrote:
On Fri, 21 Mar 2014 16:54:32 +0100
communications audio, some guys clearly know how it's done.
Yes perhaps a TX monitor would be useful, but more education of how to
produce a good, clean effective and efficient signal would be even more so.
73, F5VJC
On 10 April 2014 07:26, W0MU Mike Fatchett w...@w0mu.com wrote:
I like the CQ
, and please, please no
HEAVY Bass Eq it's totally wasted communications power and sounds rather
NAFF IMHO.
And, 3kHz audio BW is Plenty wide for our purposes.
Compression is good, used properly.
Expert opinions please?
73, F5VJC
On 11 April 2014 23:10, Phil Kane k2...@kanafi.org wrote:
On 4/9
Really... how many of us can, or wish to, send CW over 30 WPM?
73, F5VJC
On 13 April 2014 20:38, Toby Pennington w4c...@centurylink.net wrote:
Thanks you Wayne for your post indicating that it is still on the list for
improvement!
Toby K4NH
On 4/13/2014 12:38 PM, Wayne Burdick wrote
with the clicks.
Now with the P3 NB engaged this annoyance is eliminated. Great job!
Many thanks Alan and Elecraft.
73 F5VJC
On 24 April 2014 22:13, Alan Bloom a...@elecraft.com wrote:
New P3 beta software, version 01.28, is now uploaded to the Elecraft web
site:
http://www.elecraft.com/software
No, but many are, or aspire to be, Engineers and prefer correct engineering
terminology.
This is so much more useful than the propagation of ancient Ham Law or
god forbid, CB nonesense.
I vote for pedantry...
73, F5VJC
On 25 April 2014 23:12, Scott Manthe scott.man...@gmail.com wrote:
Since
as
well just go use RTTY or PSK 31 or whatever...
73, F5VJC
On 29 April 2014 22:07, Brian Alsop als...@nc.rr.com wrote:
There was a thread on QRQ CW here. Also a query about does anybody send
QRQ CW.
For 2013 CQ WW contest N6TV did an analysis.
The answer was 30+ WPM average.
The top speeds
.
There are some very knowledgeable audio and broadcast people on this list
and I'm always keen to listen to their opinions.
73, F5VJC
On 29 April 2014 20:53, Joe Subich, W4TV li...@subich.com wrote:
On 4/29/2014 12:32 PM, Fred Jensen wrote:
Not sure it is limited to dynamic mics.
Proximity effect
Agreed, much more interesting threads than this have been closed in the
past.
And yes who gives a 'monkeys' about this anyway...
F5VJC
On 18 May 2014 19:49, John Macrae kk4...@gmail.com wrote:
Absolutely correct Stewart.
I think this thread has outlived its usefulness and should be closed
interfaced to
this rig keeps my interest going.
Plug and play rigs (which is an Elecraft option of course) would soon bore
me.
I now have a super station indeed! Very happy.
Now if only I could get a 60' tower and a big beam, hmmm
73, Deni F5VJC
On 24 June 2014 12:36, Bill W2BLC w2
have to say most of the really good SSB signals do come
from the USA not Europe.
There should be something in contest rules to discourage or even outlaw the
sort of Loud and Dirty operation we hear on SSB, and not only in contests!
73, F5VJC
On 28 October 2014 04:59, Jim Brown j
such
as Koch Trainer, Just Learn Morse Code and Morse Runner for contest
practice.
Lots of good CW on air but also lots of VERY poor CW, spacing is important.
Good luck...
73, Denis F5VJC
On 1 December 2014 at 08:08, Vic Rosenthal k2vco@gmail.com wrote:
I don't agree. How does a straight key
I'm looking to acquire a Clifton Labs Z1B kit or ready built is OK.
Anyone?
73, Deni - F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
and connectors but have no interest in ESSB
or pseudo HI-FI SSB so fancy mixers are not on the agenda.
Thanks for your help and comments.
73 F5VJC
73, Deni - F5VJC
On 15 January 2015 at 23:33, Milverton M. Swire via Elecraft
elecraft@mailman.qth.net wrote:
They sell them cheaper
Ray, do you know
The more interesting signals are often down in the noise...
73, Deni - F5VJC
On 22 January 2015 at 14:55, Dave B g8kbvd...@googlemail.com wrote:
To: Elecraft@mailman.qth.net
Subject: [Elecraft] s/n ratio of this list
The S/N ratio of this list has descended below 1.0 -- way below
Hi,
Does anyone know if Jack of Clifton Labs is still in business, I'm hoping
to buy a Z1B
I've emailed Jack but no response as yet.
If anyone has a kit or prebuilt Z1B I'd be interested.
Thanks,
73, Deni - F5VJC
__
Elecraft
- F5VJC
On 6 January 2015 at 20:47, Phil Wheeler w...@socal.rr.com wrote:
Incredible, Fred. I keep thinking I should sell my K2 (#380) -- with all
options including KDSP2, KPA100 KAT100, and all updates - even the MAB
and Mic adapter board -- but each time I consider it the nostalgia sets
, anyone any pointers.
73, Deni - F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Aptos :)
Right on Grant, I've learned a new word from the Elecraft reflector
'Tightwads'
73, Deni - F5VJC
On 14 February 2015 at 22:22, GRANT YOUNGMAN n...@tx.rr.com wrote:
I find it a bit humorous that the subject invariably arising for a $200
(or $1000 or $10,000+) item ends up being
I just discovered this during CW contest, low power out !
Calibrate TX gain fixed it...Firmware MCU 05.10
73, Deni - F5VJC
On 22 February 2015 at 17:54, Phil Wheeler w...@socal.rr.com wrote:
Oops, apparently there is!
On 2/22/15 8:53 AM, Phil Wheeler wrote:
Hopefully there is not a 1
Why not add simulated QRM, QRN, QSB, COPS, LID's etc?
Much more fun...
73, Deni - F5VJC
On 13 October 2015 at 12:44, Bill <w2...@nycap.rr.com> wrote:
> I have a bunch of ham friends that no longer have antennas (HOA,
> apartments, assisted living, etc.) and we communicate near
Of course that would only work for CW DX.
Is there any other?
73, Deni - F5VJC
On 14 October 2015 at 22:39, Ken <wa8...@gmail.com> wrote:
> I wonder if a CW skimmer would work as well or even better, assuming that
> it can pick out the call signs. Of course that would only wo
.
I do not want Linked VFO/s.
Anyone else see this behaviour?
73, Deni - F5VJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Lighning ! There but for the grace of 'Good Luck' go I...
73, Deni - F5VJC
On 8 October 2015 at 22:50, drewko <drew...@verizon.net> wrote:
> During active periods of lightning I sometimes disconnect everything from
> my K3, including headphones and key. I turn off my computer an
Brother P-Touch labels.
73, Deni - F5VJC
On 8 September 2015 at 22:05, Josh Fiden <j...@voodoolab.com> wrote:
> I like Panduit write-on labels. It's clear vinyl adhesive tape with a
> white section you can write on. After marking it (fine point Sharpie works
> well), you pul
Touch screen technology is just not good enough, very irritating and IMHO
totally useless on a transceiver.
I hate it on my smartphone too!
73, Deni - F5VJC
On 4 September 2015 at 08:28, Bill Frantz <fra...@pwpconsult.com> wrote:
> What I have noticed over the years is th
You guys must be drunk on KoolAid,
180$ for an, OK Wow... 'Matching' SP3 Speaker, and most will need two,
not one
Yikes !
Shipped to Europe, I don't think so!
73, Deni - F5VJC
On 12 September 2015 at 22:54, Wayne Burdick <n...@elecraft.com> wrote:
> > The joy of living i
.
However I do really appreciate the tools available in the K3 to do this :)
APF works great if you really learn to use it.
Any one else?
73, Deni - F5VJC
On 7 February 2016 at 03:46, Dave Cole <d...@nk7z.net> wrote:
> Isn't that how the Transporter in Star Trek works? :)
> --
> 7
.
However I do really appreciate the tools available in the K3 to do this :)
APF works great if you really learn how to use it.
Any one else?
73, Deni - F5VJC
On 6 February 2016 at 12:19, Bill W4ZV <btipp...@alum.mit.edu> wrote:
> N1EU wrote
> > I suspect that when the K3 APF was f
, and brick wall filters it's perhaps all too
clinical.
On my K3 I sometimes open up the filters to really listen to what's going
on around me.
Nostalgia?
73, Deni - F5VJC
On 7 February 2016 at 20:51, Ron D'Eau Claire <r...@cobi.biz> wrote:
> Me too. Actually, I miss small variation
Take a good look at Log4OM.
73, Deni - F5VJC
On 27 February 2016 at 23:34, Terry Brown <n...@comcast.net> wrote:
> As the original sender of this thread, I want to thank all of you for
> taking
> the time to answer my question. I was amazed at the number of logging
1 - 100 of 143 matches
Mail list logo