the manual and a few basic document telling me how to use a scope. I
know how to setup good scale according to what I suppose to mesure but I
think I misse something
Any idea or help would be appreciated.
73
===
Jean-François Ménard / VA2VYZ
[EMAIL
Yes, from here, leave in Sherbrooke, Quebec, Canada
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de John J. Lally
Envoyé : 23 juin 2004 12:53
À : elecraft@mailman.qth.net
Objet : [Elecraft] Elecraft Web Site
Is the Elecraft web site working.
John
I finally found a buyer for my TS-2000 now I will have all the money to
complete my K2 with everything I need... The 100W PA will be in a EC2
enclosure with the external antenna tuner... like shown in the photo
gallery...
The DSP and all other options will also be in it. The K2 will be a
Hi,
This is a computer software issue. Audio software normally have an option to
listen what your record or monitor from de line-in of your sound card. But
sometime, software do not offer it
I have on my computer 2 softwares acting like a spectroscope One of them
offer me to listen to
You did exactly what is to be the best for you
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de James T. Jim
Rogers
Envoyé : 27 juillet 2004 14:53
À : Elecraft Reflector
Objet : RE: [Elecraft] OK Computer gurus, a little help
Thanks guys,
://www.elecraft.com
===
Jean-François Ménard / VA2VYZ
[EMAIL PROTECTED]
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
see the on the control board that the MCU have an output /PLLCS
that go to the PLL synthetizer that must be there, but why ?
This setup seems to be particular to the K2 concept ?!?!? Right, wrong
!?!?
Thanks for your time...
Sincerly,
===
Jean-François Ménard
understanding.
Thanks and sorry again for your time.
Le 04-11-25, à 19:49, Jean-François Ménard a écrit :
Hi,
As a newcomer in amateur radio... I don't know much about
electronic... But one thing for sure... My K2 works great !!!
I finally found today clear and easy explanation on the Internet
resources for Adjusting C22
to
calibrate the K2's Frequency Display.
Ron AC7AC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jean-François
Ménard
Sent: Thursday, November 25, 2004 5:56 PM
Cc: Elecraft - Maling List
Subject: Re: [Elecraft] VCO
/PhotoAlbum41.html
Proud to be in the Elecraft family !!!
73
===
Jean-François Ménard / VA2VYZ
[EMAIL PROTECTED]
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post
Début du message réexpédié :
De: Jean-François Ménard [EMAIL PROTECTED]
Date: 13 décembre 2004 19:52:35 GMT-05:00
À: michel rousseau [EMAIL PROTECTED]
Objet: Rép : File0001
Merci Michel,
Message reçu !!!
Je vais aller lire sur le dynamic range je ne suis pas trop
famillier avec ces
://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
Le 04-12-20, à 18:43, Jean-François Ménard a écrit :
Hi,
I'm using MacLoggerDX from DogPark Software. A excellent software that
support the K2.
I'm using a Powerbook G4 too!!
Take a look at : http://www.machamradio.com/
It is a good stating point for a Mac user.
73
Le 04-12-20, à 19:39
Merry X'Mas and long live to Elecraft !!!
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
A friend of mine would like to buy this K2 as described below:
K2s, s/n 3155, which has the following options:
installed: KNB2, KAF2, KSB2 K160M. I purchased this K2 in Dec. of
2002,
and built it in 2003. This K2 was built with the K2 toroid kit from The
Toroidguy,
Could someone tell me
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
K2 at full QRP power ?
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
OK I know, I know... It was not Don, but his mother Still a very sad
news :-(
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
YES !!! I received my KX1 today. took not too long to receive
it My serial number is 999 !!!
So Elecraft broke the 1000 barrier of KX1 sold
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
Hi,
Yesterday, I was building my KX1, and I was at the test phase and alignment
part 2. I tough that I was something wrong with my keyer But hopefully
I found this message on the reflector I forgot to read the errata that
came with the KX1 telling exactly this strange behavior. Ouf !!!
page: http://www.elecraft.com
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Note that those 3 software runs on OS X... not OS 9
Le 05-01-20, à 13:42, Jean-François Ménard a écrit :
Yes,
I have those 3 running om my Powerbook G4 1.5 Ghz with OS X 10.3
AudioXplorer
iSpectrum Analyzer
Mac The Scope 4x (the best !!!)
Look at www.versiontracker.com to find
Hi,
I put some photos on my basic KX1 kit that was under construction until
tonight. Ready to go now !!!
http://homepage.mac.com/jfmenard/PhotoAlbum44.html
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
!?!?!?
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Le 05-01-20, à 20:37, Jean-François Ménard a écrit :
Again,
Using my Elecraft dummy load with my MM set on DC on DL terminal, and
also using the formula that come with the Elecraft DL
I have 2.56W on 20M and 3.38W on 40M is it normal... !?!?!?
Probably no !?!?, I redo all my toroids
Hi,
Just to be sure May I leave my standard Alkaline AA batteries inside de
KX1 while using external DC supply ???
I think the KX1 is not acting the same manner as a K2 when you use external
supply !?!?
Tnanks.
J-F VA2VYZ
K2 #4130 / KX1 #999
___
Hi,
A friend of mine gave to me a marvelous cheat sheet kit for my KX1. It is
the size of a card deck. You can bring it with you on the road, and when
your memory fail, just take a peek at it to remind you the way !!!
The cheat sheet has been made by VE3HLS. I have no credit for this !!!
Thanks
Hi,
For those who wish to see the marvelous antenna tuner I finally built
for the KX1 this afternoon
Look at http://homepage.mac.com/jfmenard/PhotoAlbum44.html
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
of the KX1.
Geoff, K6TFZ
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
OK now I see your point.
But I use my regular DC power supply as an external source at home. So
the power is not supposed to be less than my batteries... I hope so ;-)
But if I go on a field trip using external 13.8V batteries to have more
power instead of a steady DC power source , OK now
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
Yes, just like a alarm system... Ready to go, any time
73
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de David
Envoyé : 1 février 2005 09:12
À : Mailingliste Elecraft
Objet : [Elecraft] K2 BAT
I was wondering how does everyone keep there
be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
have no photo for now, but a few are coming later this weeks
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post
to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
===
Jean-François
.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http
Hi,
For all who wish to see my portable setup unsing my Buddipole
running QRP @ 5W on the QRP Quebec Net
Just visit my fresh photos...
http://homepage.mac.com/jfmenard/PhotoAlbum46.html
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http
Nothing special on my side. Just be sure to your kit include the latest mods
about the SSB bandwidth... 2.4 kHz instead of 2.2 kHz... Should be there now
on lastest version.
Be sure to pay attention at the toroids... They are smaller than those in
the K2, and the enamel wire is easely
0.4W ...
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Andrew Moore
Envoyé : 2 mars 2005 16:15
À : elecraft@mailman.qth.net
Objet : [Elecraft] KX1 says PO.4 -- is this 0.4 W or 4 W?
Testing my KX1 with internal antenna tuner... When in tune mode the
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http://homepage.mac.com/jfmenard
===
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
on it but I don't thing it's
enough
Anybody have a replacement part number or explanation of what I should
ask for Digikey part number Digikey sells in Canada... where I
live
Thanks for your help !!
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
Finally, everything is fully working
One more time... if you are not in a good mood to build leave it
there as is but when you feel OK... GO GO GO !!!
Thanks to Don for his advice...
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 / KX1 #999
http
of the poor HF condition that day.
http://homepage.mac.com/jfmenard/PhotoAlbum50.html
Thanks !!!
73
J-F / VA2VYZ
_
Jean-François Ménard
Responsable du service informatique
CIMA+
3385, rue King Ouest
Sherbrooke QC J1L 1P8
CANADA
Tél.(819) 565-3386 poste #4362
Fax (819) 821-4283
I did this setup and it works without any flaw. Give us an advantage
Easy QRP and QRO setup at the same time in second !!!
I have a few photos on my website on this setup:
http://homepage.mac.com/jfmenard/PhotoAlbum29.html
And there...
http://homepage.mac.com/jfmenard/PhotoAlbum47.html
]
Envoyé : 16 juin 2005 08:44
À : Jean-François Ménard
Objet : Re: RE : [Elecraft] KPA100 and EC2
Jean-François Ménard wrote:
I did this setup and it works without any flaw. Give us an
advantage Easy QRP and QRO setup at the same time in second !!!
I have a few photos on my website
YES !!! ;-)
-Message d'origine-
De : Paul Heller [mailto:[EMAIL PROTECTED]
Envoyé : 16 juin 2005 10:07
À : Jean-François Ménard
Objet : Re: RE : RE : [Elecraft] KPA100 and EC2
Jean-François Ménard wrote:
The LDG Z-100 is really not as good as the KAT100. I experiment many RF
Did you redo an alignment of the KPA100 after, or you just changed the 2
caps ?
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Mike Markowski
Envoyé : 22 juin 2005 12:36
Cc : Elecraft Reflector
Objet : Re: [Elecraft] KPA100 power on 20m/30m, update
Vic
Finnaly ordered FT-100 knob seems to be OK, size, shape, etc... Thanks
everyone for tips !
73
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Geoffrey
Mackenzie-Kennedy
Envoyé : 11 juillet 2005 13:50
À : [EMAIL PROTECTED]
Cc : Elecraft Discussion
Maybe for some people, FT-900 is better, but it is now an obselete part and
no more available from Yaesu... :-(
That's what Yaesu USA told me yesterday...
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de [EMAIL PROTECTED]
Envoyé : 12 juillet 2005 09:32
Duty free for amateur product in Canada ... YES. It is not because you
bought something from Canada you will be duty free you finally
IMPORT something on your side. So you are responsible of the
restriction of your country.
I ordered a lot of amateur products from the US... and I only
Hi,
I finally built my DATA port on my Elecraft K2. It works great with my
NUE-PSK modem.
If people would like to have detail please feel free to ask...
I put a few pictures on Internet...
http://www.flickr.com/photos/va2ss/
73
===
de Jean-François VA2SS
===
de Jean-François
Hi Elecrafters !!!
I finally did my K2 universal DATA port. I put the schematic on my
website...
http://www.flickr.com/photos/va2ss/
I say «universal» because I also add audio transformer to keep ground
loop away and a trimmer to the input, so you will be able to keep mic
preamp setting
Hi to all, I have updated my pictures about the DATA port I added on
my Elecraft K2. I changed a few thing. First of all I used RG-174 coax
for all wires I found that the audio was a little bit distort
using regular flat ribbon cable. RJ-174 is very small and provide
better
Hi everybody,
Since my first prototype of the K2 DATA port implementation, I did some
extensive test today during an outdoor portable operation.
I found that ground loop can occur on lower band... 40m or lower... And the
problem come from the PTT line that goes to ground during TX. Even
Hi everybody,
When I was doing the alignment of my 3rd built KPA100, I found that I
have a HI CUR message on 80m only.
A short history, I always have this message on 80m and need to set the
CAL CUR value a little bit higher when using the K2 in QRP mode
2.8 amp instead of 2.5 amp. I
.
De Jean-François Ménard / VA2SS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
unplugging things and it started
working
Unplug the key and check again.
Ron AC7AC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm
Sent: Thursday, September 18, 2008 8:34 PM
To: Jean-François Ménard
Cc: elecraft@mailman.qth.net
Subject: Re
be OK with those cables unplugged.
73,
Don W3FPR
Jean-François Ménard wrote:
Hi everybody,
I have my first major trouble since my building experience back in
2004. Now, everytime i power up my K2, I can see ELECRAFT and then
the frequency. but everything is frozen after.. still get
involved.
73,
Don W3FPR
Jean-François Ménard wrote:
It seems that something let my K2 stuck in TX mode. I removed all
module and put appropriate jumpers (unmod kit). Still in TX when
powered ON. I checked this using my DL2 dummy load with my
multimeter I always have output power !!
Could
I also found another thing.
Resistance check of Pin 7 and 8 of RP4 on the control board give me
81K ohm, but PIN 5 and 6 give me 19K ohm... should be 81K ohm too !!!
Le 08-09-19 à 09:29, Jean-François Ménard a écrit :
It seems that a resistence check on the control board give me
You are right!! After U6 removed RP4 pin 5 and 6 are now at 81k
ohm!!
U6 must be replaced
Thanks for your help. But one question remains. What did
happen to U6 ??
Jean-François Ménard
Le 08-09-19 à 09:52, Don Wilhelm [EMAIL PROTECTED] a écrit :
Jean-Francois,
Sounds like
-François Ménard / VA2SS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
to be
damaged.
Is it possible that there was nothing wrong with Control Board U6,
but the entire problem was KSB2 U1? There is a possibility that
both were bad - that happens, but rarely.
73,
Don W3FPR
Jean-François Ménard wrote:
I found last week, with help from a few guys, that my problem
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
De Jean-François Ménard / VA2SS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Hi,
Elecraft already have a mod kit for this kind of
behavior since 2005. The part number is : K2VCOSHLDKT
You can also take a look at the documentation provided
at :
http://www.elecraft.com/manual/K2%20VCO%20sheild%20mod%20rev%20E.pdf
Have a nice day.
JF VA2VYZ
--- Dave Jeanne Robertson
://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Jean-François Ménard
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
.
Take a peek at some pics... http://web.mac.com/jf.menard
click on the tab «K2 mods»... last few pics...
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
Elecraft KX1 #999
FISTS #11896
SKCC #2245
http://web.mac.com/jf.menard
question is: Has Q3 has bit the dust?
Thanks...
73,
Ken Wagner K3IU
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
Elecraft KX1 #999
FISTS #11896
SKCC #2245
http://web.mac.com/jf.menard
__
Do You Yahoo!?
Tired of spam
on my website...
http://web.mac.com/jf.menard
Just click on the «KX1 K2 ANT» tab menu.
Best 73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130
Elecraft KX1 #999
FISTS #11896
SKCC #2245
http://web.mac.com/jf.menard
And click on the «KX1 CASE» tab in the menu to access this section.
Have a nice day and best 73 !!
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
__
Do
Le 07-01-07 à 12:16, Jean-François Ménard a écrit :
Hi,
I received many emails asking me if I could include in my website
pictures of the KX1 Pelican micro case setup. So I added this
morning pictures with a few descriptions for the pics.
So if you want to take a look at it... just go to my
consider this alternative as
an upgrade feature for the futur ?!?!! :-))
What do people think about it !?!?!
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
__
Do
any pics of the case ?
- Message initial
De : Stephen Brandt [EMAIL PROTECTED]
À : elecraft@mailman.qth.net
Envoyé le : lundi 8 janvier 2007, 01 h 38 min 08 s
Objet : Re: [Elecraft] kx1 travel case smith and wesson
And you can use the Protected by Smith and Weston decal.
Never mind
this normal for the K2 :-((
- Message initial
De : worsr [EMAIL PROTECTED]
À : elecraft@mailman.qth.net
Envoyé le : lundi 8 janvier 2007, 13 h 45 min 37 s
Objet : [Elecraft] VFO A/B issue
I couldn't find this in the manual. On my K2 (05767), the frequency in the
alternate VFO is
Hi,
I have already built such switching box using fast relay and an external key
from the K2 (and for my test, another rig and etx. key) This is working. And I
think by using 2 K2, we will be able to give more intelligence to the swtiching
box. but my main concern is between the 2 IO lines
On my side, when doing CAL FIL, I always BYPASS the KDSP2.
J-F VA2VYZ
- Message initial
De : Dohn [EMAIL PROTECTED]
À : [EMAIL PROTECTED]; [EMAIL PROTECTED]; elecraft@mailman.qth.net
Envoyé le : lundi 8 janvier 2007, 15 h 46 min 27 s
Objet : RE: [Elecraft] CAL PLL and CAL FIL
If you
It will work. The KIO2 is the same as the IO in the KPA100.
J-F VA2VYZ
- Message initial
De : Chuck Guenther [EMAIL PROTECTED]
À : elecraft@mailman.qth.net
Envoyé le : mardi 9 janvier 2007, 07 h 51 min 00 s
Objet : [Elecraft] microHam CW keyer
I'm now working on the KIO2 kit for my
to start now. I don't have very much
experience in finding trouble.
If someone could coach me where to start, I will really
appreciate... :-((
Thanks for your times.
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http
-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
on the
side of C65 drop to 2.7V (should be around 4.7 ???)
All other measurements in the troubleshooting section are in the spec
range.
So, If I consider that my problem is in RX. Is these results
could help ???
Le 07-01-11 à 20:45, Jean-François Ménard a écrit :
Hi to all,
Last week
Question: If I have 7.2Vdc on U7 pin 1 on RX... is it possible that a
problem with relay K1 ??? Because on RX, relay K1 should be in
another position as I can figure it out on the schematic !?!?!?!?
Le 07-01-12 à 10:05, Jean-François Ménard a écrit :
Hi,
I verified all voltages
... :-))
If it is an Elecraft, it could be repaired !!!
Thanks for any help !!
73
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
__
Do You Yahoo
on C1 side = 0.0 vrms !!
Am I on the good track ?!?!?!?
Further reading give me also 0 at C3 and C48
Le 07-01-12 à 17:15, Matt Osborn a écrit :
On Fri, 12 Jan 2007 14:47:05 -0500, Jean-François Ménard
[EMAIL PROTECTED] wrote:
If someone could just give the actual Vdc of BOTH side of C3
First of all, thanks to everyone who help me out !!!
Problem solved !!
Finally, I changed Q3 and C28 and everything is now working A
Best 73
J-F VA2VYZ
Le 07-01-13 à 11:30, Jean-François Ménard a écrit :
Worst than that I just connect my wideband NGen... I'm using my
rf probe too
visiting !
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http
with my K2... and two, I do
not want to hear relays when running full breakin.
A question come to my mind. when Elecraft will have the KPA800
ready !?!?
What kind of HF amp on the market could be as good as Elecraft ?
===
Jean-François Ménard / VA2VYZ
Elecraft
It looks like a very nice option to a K2. I sent them an email to verified how
much in Canada with the shipping
I'm really sad, because I'm really minded on KPA800 mainly the spec and
feature give me an high interest in a futur project with 2 K2 on the same
amp
I really don't get
I used my K2 last year very often with an Ameritron AL-811H... No problem since
I sold it
- Message initial
De : Wyn Hughes [EMAIL PROTECTED]
À : elecraft@mailman.qth.net
Envoyé le : lundi 22 janvier 2007, 08 h 37 min 28 s
Objet : [Elecraft] HF Amplifier
Jean-Francois
The main
I read the review. Yes the alignment accuracy and drifting is a fact. But I
keep in mind that the design is simple and must stay simple if we want to do
service in it. Yes with more microcontroller and recent gears, it will be
better... but how much more $$$
Also, I'm using it as my main rig,
Oh boy... again... ;-))
Take a look at the Yaesu FT-100 knob... I have one on my K2, and one spare for
my next K2.
Take a look at my website at http://web.mac.com/jf.menard/
Click on the K2 MOD tab i the menu look at the last two pics... and click
on it to make it bigger...
A very nice
in US (conus) or Canada
If you have any question or want to buy, please e-mail me off list.
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
__
Do You
) or Canada
Payment option: Paypal or Money Order
===
Jean-François Ménard / VA2VYZ
Elecraft K2 #4130 KX1 #999
FISTS #11896
SKCC #2245
Web: http://web.mac.com/jf.menard
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has
Item sold, thanks !
*** KAT100 + KPA100 in EC2 enclosure ***
Excellent construction, excellent working condition
and very good =20
cosmetic. Kit was bought last autumn 2006 and built by
myself.
KPA100 firmware version 1.09
Brand new today: 667$ USD + shipping. I'm asking 525$
USD + shiping
I was using a Tek TDS2014 for a while... FFT function was very useful to
calibrate filters, check CW and SSB bandwitdth, adjust SPOT tone, etc...
Also good for adjusting power output with a 10X probe with AC rms with
a directionnal coupler. Many things could be done
I recently change my
look at pelican.com... I found mine there and it did a great job. My KX1
is in a Pelican Microcase 1060, and I use foam from a pelican case.
Scott Spencer a écrit :
This is a bit off of the normal topics but since there are a lot of portable
operators on this list, I figure somebody may be
Excellent idea Doug if you want to show to people the work labor you did
But I think it will not be a good idea to use it for TX
Doug Shields a écrit :
Hello all,
I wanted to show off my K2 at the recent Melbourne hamfest. But, I
didn't want a lot of people poking around inside
Hi,
I would like to learn and explore more «signal tracing» procedure and
technique. I actually have a Fluke 196C. But I don't have a signal
generator.
A friend of mine have his signal generator for sale. The model is an
Instek GFG-8216A. I would like to know if the device will be good for
1 - 100 of 129 matches
Mail list logo