As a K2 only owner I appreciate when the posters reference the equipment
they are posting about in the subject line (e.g. "K3"). This helps with
auto sorting.
Tom, wb2qdg
K2 #1103
On 9/21/2016 1:29 PM, Thomas Taylor wrote:
On Tue, 20 Sep 2016 18:35:27 +
Eric J
On Tue, 20 Sep 2016 18:35:27 +
Eric J wrote:
> I had recently stopped monitoring the reflector as I only have a K1 and
> two K2's. Everything is K3 and subject lines rarely reflect that anymore
> so it's hard to filter them. But I had a K2 problem and rejoined. Got a
My K2 # 136 yet does yeoman duty at the bedside, as a listening post in
the whee hours
But recently I had to take it apart, to recall how the jumpers are set
for the HM-2. Was
helping a friend get his recent purchase of a mike & K2 to work together.
Brought back memories of the Summer 1999
<eric_c...@hotmail.com>
收件人︰ "elecraft@mailman.qth.net" <elecraft@mailman.qth.net>
傳送日期︰ 2016年09月21日 (週三) 2:35 AM
主題︰ [Elecraft] OT: K2
I had recently stopped monitoring the reflector as I only have a K1 and
two K2's. Everything is K3 and subject lines rarely reflect
Will,
Thank you for your fine words. They are appreciated. I continue to
help where I can.
73,
Don W3FPR
On 9/20/2016 8:39 PM, WILLIE BABER wrote:
Hello Don,
You may never know how many folks you have helped-out who are K2 owners. As I
mentioned in an earlier post, I didn't finish my
, Don Wilhelm <donw...@embarqmail.com> wrote:
Subject: Re: [Elecraft] OT: K2
To: elecraft@mailman.qth.net
Date: Tuesday, September 20, 2016, 4:34 PM
Eric,
I do repairs, alignment and calibration and upgrades of the
Elecraft
legacy gear (K2, K1, KX1 and XV series transverters), and
Eric,
I do repairs, alignment and calibration and upgrades of the Elecraft
legacy gear (K2, K1, KX1 and XV series transverters), and I am as busy
as I want to be (sometimes more than I want to be).
So there is still a lot of interest in that gear, but you are right,
most of the posts are
I had recently stopped monitoring the reflector as I only have a K1 and
two K2's. Everything is K3 and subject lines rarely reflect that anymore
so it's hard to filter them. But I had a K2 problem and rejoined. Got a
response with solution within an hour! And discovered that I miss the OT
so I've been using my K2 manual a LOT lately and the cover is starting to
fall off - the holes are tearing out. Anybody know of a good way to protect
it from falling off completely?
TJ W0EA
__
Elecraft mailing list
Home:
Try your local office supply store, like Staples. They have the ability
to create spiral-bound manuals. They could probably disassemble your
manual, laminate and re-punch the cover, and assemble it again. I had
some similar work done and it was surprisingly cheap.
73, Dennis NJ6G
On
I would like to use an analogue speech compressor like the one in the K2
SSM2165 but I see it is now obsolete. Can anyone recommend an alternative?
In amateur applications of modest compression, is there much difference between
the -1 and -2 types? I'm told a few of the lower gain versions
Had to share the elation: snagged FO/OH1RX on 80 M CW at gray line this
morning -- K2 running 5 W to 135 foot doublet, window line feed, at 50 feet.
Mike, K8CN
K2 #5569
New Hampshire
--
View this message in context:
http://www.nabble.com/OT%3A-K2-elation%21-tp14998762p14998762.html
Sent from
Gee, somebody actually enjoying the hobby of ham radio instead of writing
posts of compaint. How refreshing!
73
Bob K4LW
Had to share the elation: snagged FO/OH1RX on 80 M CW at gray line this
morning -- K2 running 5 W to 135 foot doublet, window line feed, at 50
feet.
Mike, K8CN
K2 #5569
Recently I had my K2 (#2511) upgraded with the A to B mod kits. I have had
some odd experiences with it since then.
When I get up each morning I need to stoke the fire to warm the house up.
Sometimes the morning temperature is in the high 40s (F). Normally it is in
the low 50s range. Not
I made my own cable. I used the 1/8 stereo plug for the RCV audio, and I
believe I use a 1/8 mono for the TX audio because I have one of the Heil
microphone adapter cables that breaks out the Keying and TX audio ckts to
seperate 1/4 1/8 jacks accordingly. Made it pretty simple versus having to
Yes David, I just bought that interface and have it working with the K2.
Stan Rife
W5EWA
David Wilburn [EMAIL PROTECTED] wrote:
Has anyone used the USInterface.com, Navigator, with the K2?
-
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 S/N 5982
On Wed, 2007-11-07 at 14:03 +0100,
16 matches
Mail list logo