Re: [Elecraft] KX2 feature request
I've set it to .5 - works great now for what I want. Thanks again, John AE5X https://ae5x.blogspot.com >You can change the KX2’s coarse tuning rate on a per-mode basis using the VFO >CRS menu entry. In CW mode the default is 0.1 kHz, but you can set it to >something higher. This would allow you to QSY much more quickly. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX2 feature request
Hi John, You can change the KX2’s coarse tuning rate on a per-mode basis using the VFO CRS menu entry. In CW mode the default is 0.1 kHz, but you can set it to something higher. This would allow you to QSY much more quickly. Another trick: Whenever the OFS knob’s LEDs are both off (RIT and B), the control does coarse control of VFO A. Assuming RATE is set to 10 Hz, this means you can do fine tuning with VFO A and coarse tuning with OFS -- no switch taps needed. Wayne N6KR > On Feb 23, 2018, at 6:51 AM, John Harperwrote: > > With Bouvet off the horizon for the time being, I've begun to use my KX2 as > more of a Main Rig lately and wonder if a feature could be considered in a > future firmware release. > > The RATE button currently toggles between two rates. Could a third rate be > added that changes the step to kHz (as opposed to the current .1 or .01 kHz > rate)? This would greatly simplify getting from one end of the CW sub-band > to the other, as is sometimes the case if I'm near 14060 and then see a DX > spot for a station on 14015 for example. > > I know I can punch in the desired freq with the numerical buttons but I > think a faster rate would be easier in actual operation. > > Tnx/73, > > John AE5X > https://ae5x.blogspot.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX2 feature request
Thanks Don(s) - I had no idea the course value was configurable. That'll teach me to RTM... 73 all John AE5X https://ae5x.blogspot.com On Fri, Feb 23, 2018 at 9:13 AM, Don Wilhelmwrote: > John, > > Check the left column on page 16 of the KX2 manual. The OFS/B knob can be > used for coarse tuning of VFO A to allow rapid frequency excursions of the > band. Also see VFO CRS in the menu. > > 73, > Don W3FPR > > > On 2/23/2018 9:51 AM, John Harper wrote: > >> >> The RATE button currently toggles between two rates. Could a third rate be >> added that changes the step to kHz (as opposed to the current .1 or .01 >> kHz >> rate)? This would greatly simplify getting from one end of the CW sub-band >> to the other, as is sometimes the case if I'm near 14060 and then see a DX >> spot for a station on 14015 for example. >> > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX2 feature request
John, another option for moving quickly around a band with the KX2 is to toggle the VFO knob to coarse tuning …. about a half turn of that little knob will cover 100 khz in a hurry ….. that’s what I do.The KX2 main VFO will always be “clunky” when compared to larger radios … but I think that’s small price to pay when such a great radio is put into a very small package. Don, N5LZ Sent from Mail for Windows 10 From: John Harper Sent: Friday, February 23, 2018 7:56 AM To: Elecraft list Subject: [Elecraft] KX2 feature request With Bouvet off the horizon for the time being, I've begun to use my KX2 as more of a Main Rig lately and wonder if a feature could be considered in a future firmware release. The RATE button currently toggles between two rates. Could a third rate be added that changes the step to kHz (as opposed to the current .1 or .01 kHz rate)? This would greatly simplify getting from one end of the CW sub-band to the other, as is sometimes the case if I'm near 14060 and then see a DX spot for a station on 14015 for example. I know I can punch in the desired freq with the numerical buttons but I think a faster rate would be easier in actual operation. Tnx/73, John AE5X https://ae5x.blogspot.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX2 feature request
John, Check the left column on page 16 of the KX2 manual. The OFS/B knob can be used for coarse tuning of VFO A to allow rapid frequency excursions of the band. Also see VFO CRS in the menu. 73, Don W3FPR On 2/23/2018 9:51 AM, John Harper wrote: The RATE button currently toggles between two rates. Could a third rate be added that changes the step to kHz (as opposed to the current .1 or .01 kHz rate)? This would greatly simplify getting from one end of the CW sub-band to the other, as is sometimes the case if I'm near 14060 and then see a DX spot for a station on 14015 for example. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX2 feature request
With Bouvet off the horizon for the time being, I've begun to use my KX2 as more of a Main Rig lately and wonder if a feature could be considered in a future firmware release. The RATE button currently toggles between two rates. Could a third rate be added that changes the step to kHz (as opposed to the current .1 or .01 kHz rate)? This would greatly simplify getting from one end of the CW sub-band to the other, as is sometimes the case if I'm near 14060 and then see a DX spot for a station on 14015 for example. I know I can punch in the desired freq with the numerical buttons but I think a faster rate would be easier in actual operation. Tnx/73, John AE5X https://ae5x.blogspot.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX2 Feature request OFS / DISPlay
Hi Doug, Yes you are correct the RATE button will change the tuning rate of the VFO A knob, and the OFS mode will use the VFO B Knob to change the frequency of VFO A at the VFO-CRS rate. Whilst it does duplicate features it also allows the MAIN knob to be left at a slow rate and OFS used for quick tuning. So no need to button press RATE for quick QSY's just use the OFS mode. This configuration I find to be natural and makes sense, less button pushing just to two knobs to deal with. Equally the DISPlay Mode is the great I generally leave it on Voltage or Clock, but I if set the radio to use the OFS function the Display of Voltage etc. disappears and is replaced by Frequency of VFO B When using the Decode Text function the VFO B display is replaced by Decoded (or Transmitted) Text, however the OFS still operates as a course Tune for VFO A. It was the option to have this functionality I was asking to be added as a new feature, the ability to have Both the Course Tuning of VFO A via OFS and the VFO B section of the Display being able to Display Voltage, or Clock, etc, at the same time. 73, Warren vk3byd +++ Warren- I believe that if you use the"rate" button to the left of the main tuning knob, on the bottom row that it does this function. At least, that was what I was doing before I realized the OFS knob does the same thing. I still have not read the entire manual, nor do I understand all of the functions, but at least on my KX2, that is what happens. And when I learned about the OFS knob (the cheat sheet floating around the email lists, is great) I wondered about the duplication of the feature.Both values change the amount I place in the menu for VFO CRS. Doug +++ Using the OFS mode for Course tuning and the Main VFO knob for Fine tuning is great but this is at the expense of the DISPlay function. It would be great to leave the VFO B display set as DISPlay but still have the option to Course tune via the VFO B Knob, rather than changing the tuning rate of the Main VFO knob between course and fine when DISPlay is on. This would be similar to how the TEXT DECODE mode works, and would allow the operator to leave the DISPlay on Voltage, Clock or whatever they wanted and still have course tuning. Implementation could be via a new option in the Menu setup, VFO B display [VFO B or DISP] when in OFS Mode. Or maybe When OFS On, Display [VFO B, Voltage, Time, Ah etc..] 73, Warren vk3byd #479 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX2 Feature request OFS / DISPlay
Warren- I believe that if you use the"rate" button to the left of the main tuning knob, on the bottom row that it does this function. At least, that was what I was doing before I realized the OFS knob does the same thing. I still have not read the entire manual, nor do I understand all of the functions, but at least on my KX2, that is what happens. And when I learned about the OFS knob (the cheat sheet floating around the email lists, is great) I wondered about the duplication of the feature.Both values change the amount I place in the menu for VFO CRS. Doug __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX2 Feature request OFS / DISPlay
Using the OFS mode for Course tuning and the Main VFO knob for Fine tuning is great but this is at the expense of the DISPlay function. It would be great to leave the VFO B display set as DISPlay but still have the option to Course tune via the VFO B Knob, rather than changing the tuning rate of the Main VFO knob between course and fine when DISPlay is on. This would be similar to how the TEXT DECODE mode works, and would allow the operator to leave the DISPlay on Voltage, Clock or whatever they wanted and still have course tuning. Implementation could be via a new option in the Menu setup, VFO B display [VFO B or DISP] when in OFS Mode. Or maybe When OFS On, Display [VFO B, Voltage, Time, Ah etc..] 73, Warren vk3byd #479 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com