Re: [Elecraft] CAT on K3
Sure, Keith. Connect the K3 RS232 port to the P3 and the P3 to your computer. 73, /Rick N6XI On Fri, Apr 9, 2021 at 6:34 AM Keith Orchard via Elecraft < elecraft@mailman.qth.net> wrote: > I use Logger32 for logging and it has occurred to me I could connect my K3 > to my laptop to get automatic band-logging. > I run a K3, KPA500 & P3. Can I use the RS232 connector on the K3 to > connect to my laptop? Currently I use that connector to connect to the P3. > Help would be appreciated. > Keith G3TTC > > Sent from my iPhone > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rta...@gmail.com > -- -- Rick Tavan Truckee and Saratoga, CA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CAT on K3
The word is that anything that can be done from the front panel can be done from the computer interface. 73, doug From: Robert Dwiggins II [EMAIL PROTECTED] Date: Fri, 4 May 2007 18:12:35 -0500 I was looking at the specs on the K3, and they look impressive. However, I was wondering which CAT functionality will be included. Will it be possible to control the pot settings (AF/RF/mic gain/NB gain, notch, passband tuning, variable bandwidth IF filtering, etc etc) via the RS232 port? In other words, will most if not all of the rig's functionality be controllable using a software interface such as Simon's Ham Radio Deluxe? 73, Bob NE5RD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] CAT on K3
... In other words, will most if not all of the rig's functionality be controllable using a software interface such as Simon's Ham Radio Deluxe? Ultimately, yes. Every control on the K3 is read by the same MCU that interfaces to the serial port. There are no signals that pass through any switches or pots. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
