Re: [Elecraft] K2 Serial Port Question

[Don Wilhelm]

Brad,

It is good to hear you are using the special cable.  Do NOT plug a 
standard serial cable into the AUX IO connector, that can damage both 
the K2 and the serial port.


First, check to see if the PORT menu setting is ON.
That is in the secondary menu (enter the menu and tap display to get to 
the secondary menu).


Do you have sidetone on that K2?  If not, go to the STL menu setting, 
Edit the parameter and tap DISPLAY until you hear sidetone.  Then test 
again.


Do you have 12 volts on pin 8 of the DE9 connector?  If not, inductor L1 
on the AUX board may be open.


On the KIO2 board, check inductors L2, L3 and L4 for continuity.

Those are quick checks.  If you continue to have problems, it is likely 
to be the MAX1406 IC on the KIO2 that is the problem.  If you are 
willing to disconnect a wire in the internal cable to the KIO2 board, I 
can give you some DC tests to check that IC.


73,
Don W3FPR

On 10/14/2016 11:40 PM, Brad Brooks wrote:

While I continue to review the list archives, I am requesting feedback from the 
group with regard to possible failure modes of the KIO2 board. This rig is in 
loan to me, with the loaner stating that it was claimed working when he 
acquired it from a previous owner, but had not himself tested serial operation.

K2/100 SN 879

Performed configuration and testing outlined in the KIO2 manual. Tests tried 
with no positive results:
- Known good FTDI serial-to-USB interface
- known good "real" serial port.
- serial breakout cable configured per manual.

I have not yet put pins 2 and 3 on the scope to determine if the board has 
failed. I am interested if anyone else has wrestled, and won, KIO2 failures.

Of course, I am open to configuration and user error on my part. I have been 
prone to foolishness in the past.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 Serial Port Question

[Guy Olinger K2AV]

Remembering that the DB9 jack on the back of the K2 is not RS232, if an
RS232 device like a USB/serial cable was ever plugged in directly, stuff
can be smoked, and on both ends of the serial cable. Most of the pins are
used to talk to the 100w amp and tuner mounted externally.

Voltmeter sounds good.

73, Guy K2AV

On Friday, October 14, 2016, Brad Brooks  wrote:

> While I continue to review the list archives, I am requesting feedback
> from the group with regard to possible failure modes of the KIO2 board.
> This rig is in loan to me, with the loaner stating that it was claimed
> working when he acquired it from a previous owner, but had not himself
> tested serial operation.
>
> K2/100 SN 879
>
> Performed configuration and testing outlined in the KIO2 manual. Tests
> tried with no positive results:
> - Known good FTDI serial-to-USB interface
> - known good "real" serial port.
> - serial breakout cable configured per manual.
>
> I have not yet put pins 2 and 3 on the scope to determine if the board has
> failed. I am interested if anyone else has wrestled, and won, KIO2 failures.
>
> Of course, I am open to configuration and user error on my part. I have
> been prone to foolishness in the past.
>
> 73 Brad WF7T
> Nashville y'all.
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net 
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av@gmail.com 
>


-- 
Sent via Gmail Mobile on my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com