It should not be necessary to use the "Use CAT commands from file"
option. Set PTT/CAT to "01,Kenwood (newer models)" and check the
"Use PTT" radio button. Set the Comport to the port created by the
K3S.
Set the Soundcard (Select Soundcard) to "Line (USB Audio CODEC)" or
"mic (USB Audio CODEC)" depending on the way the K3S identifies in
your operating system for Input and "Speakers (USB Audio CODEC)" for
Output.
In the K3S make sure to set CONFIG:PTT-Key to rts-OFF to allow the
RTS line of the USB port to be used for PTT by the K3S.
Set the K3S to DATA A mode, set MENU:MIC SEL to LINE IN and adjust
the K3 Mic Gain along with the Windows gain for FSQCALL for four
bars of ALC with the fifth flickering.
In general, these configuration options are the same as one would
use for PSK31, JT65, JT9 or any other audio based data mode.
Note: there may be a problem with FSQcall and COM port numbers greater
than 8. I have not made it work with higher port numbers but it works
properly with COM 1 - COM 8.
73,
... Joe, W4TV
On 9/22/2016 2:06 PM, hb9brj wrote:
Quite some time ago I did some tests using FSQCALL v0.24.6 and my K3 TRX.
I used the "Use CAT commands from file" option. In a text file, you have to
define the relevant COM port and CAT parameters. See the help text for
details.
Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3S-and-FSQcall-tp7622727p7622763.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to li...@subich.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
