Setting CONFIG:TX DLY to 20 ms will shorten the first element (dot or dash)
by 20 ms (about).  If you're using QSK, it will shorten *every* dot or dash
by that amount.  The new KSYN3A synthesizers do not change this.  Setting
CONFIG:CW QRQ ON will make the TX delay much shorter (how much shorter is
not well documented, but it is significant).

The length of a dot, in milliseconds, is 1200 / speed in WPM.  So at 40
WPM, a dot is only 30 ms long, and you'll be removing 2/3rds of it with TX
DLY 20 (but you may not hear this in the monitor).

What amplifier are you keying with the K3 that requires such a long TX
Delay to avoid hot switching?

73,
Bob, N6TV

On Mon, Aug 7, 2017 at 9:53 AM, brian <als...@comcast.net> wrote:

> I wonder if the QSD keying problems when TXD was set >8 ms has vanished
> with the new synthesizer boards?
>
> It sounds OK in the monitor when using an external keyer at TXD 20 ms. But
> I've yet to get an over the air opinion.  I seem to recall one could hear
> it in the monitor.
>
> 73 de Brian/K3KO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@arrl.net
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to