I carry my K2/100 in a Tenba BY09 camera bag, and put that inside a Mindshift Rotation 180 backpack along with my KAT 100, a Vibrokeyer (in a Lowepro case), the MFJ 818 swr/wattmeter, and a RigExpert AA-30 that is perfect for carry on luggage. The power supply, and Buddipole goes in checked luggage.
If I am operating QRP the K2/100 gets replaced with a K2/10 and some non-essentials are replaced with more important items and the Buddipole gets strapped to the side. The Mindshift backpack also has space for camera and some additional necessities. So, it actually serves dual purpose, and is very easy to pack anywhere and while it doesn't offer the knock around protection of a Pelican case, I am not in the habit of throwing around electronic equipment. -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob DeHaney Sent: Thursday, February 8, 2018 3:58 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Travel Cases Check Online for Drone backpacks and cases from DJI etc. They are very reasonably priced and have compartments for small drones, batteries, remote control, etc. Vy 73 de Bob DJ0RD/WU5T -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of elecraft-requ...@mailman.qth.net Sent: Thursday, February 8, 2018 09:18 To: elecraft@mailman.qth.net Subject: Elecraft Digest, Vol 166, Issue 8 Send Elecraft mailing list submissions to elecraft@mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to elecraft-requ...@mailman.qth.net You can reach the person managing the list at elecraft-ow...@mailman.qth.net When replying, please edit your Subject line so it is more specific than "Re: Contents of Elecraft digest..." Today's Topics: 1. Re: KX2 Travel Case for Portable Operation (Rod Hardman) 2. Re: Old Posts (Mike Flowers) 3. Re: Old Posts (Lynn W. Taylor, WB6UUT) 4. Re: Selectivity (Nr4c) 5. Re: ALC and Solid State Amps... (Nr4c) 6. Re: ALC and Solid State Amps... (Bob McGraw K4TAX) 7. Old Posts Explained (Eric Rosenberg) 8. Re: Selectivity (Bob McGraw K4TAX) 9. KX2 Travel Case for Portable Operation (John Harper) 10. Ordered KPA1500 on 8/30 (W1PEF) 11. Re: Ordered KPA1500 (Carl Yaffey) 12. Re: K3 DTMF tones (Don Wilhelm) 13. Re: Ordered KPA1500 on 8/30 (Ed Gray W0SD) 14. Re: K3 DTMF tones (hawley, charles j jr) 15. Re: Ordered KPA1500 on 8/30 (Rick Bates (WA6NHC)) 16. Ordered 8/24 KPA-1500 (Torrey Mitchell) 17. Re: K3 DTMF tones (Joe Subich, W4TV) 18. KPA1500 ordered 8/24 (Jim Miller) 19. K3s Low sub receiver volume (Lawrence obrowski) 20. Re: KPA1500 ordered 8/24 (Paul Van Dyke) 21. Re: Old Posts (Neil Zampella) 22. Re: K3s Low sub receiver volume (hawley, charles j jr) 23. Re: KX2 Travel Case for Portable Operation (Joan) 24. Free -- K1BKLTKIT - LCD Backlight Kit for a K1 (Dave AD6A) 25. "SOLD" - RE: Free -- K1BKLTKIT - LCD Backlight Kit for a K1 (Dave AD6A) 26. Re: K3s Low sub receiver volume (Scott) 27. Re: K3s Low sub receiver volume (Buck) ---------------------------------------------------------------------- Message: 1 Date: Wed, 7 Feb 2018 18:41:27 -0500 From: Rod Hardman <va3on.li...@gmail.com> To: Richard Thorne <rtho...@rthorne.net> Cc: Elecraft Reflector <elecraft@mailman.qth.net>, k...@yahoogroups.com Subject: Re: [Elecraft] KX2 Travel Case for Portable Operation Message-ID: <b9f86584-6b31-4466-bf9a-74e104fbd...@gmail.com> Content-Type: text/plain; charset=utf-8 Rich I found a very nice, light but rugged pouch on Amazon that has some nice features, including spots for a couple of Packtenna minis and accessories. It?s not overly padded but rather intended to slip into your main rucksack and not dig into you like a pelican. Video here: https://youtu.be/ZDBurkE308I /rod, VA3ON On Feb 7, 2018, at 16:27, Richard Thorne <rtho...@rthorne.net> wrote: I've seen a few neat ideas on how to carry/use a KX2 in the field. I just picked up a very nice KX2 (Thanks WB5XX) that I plan on using for SOTA op's. It came with the SideKX end panels and the protective plastic cover. I was on a SOTA trip with WG0AT last September and he had a very nice tin that the KX2 fit in. It wasn't much bigger than the KX2. I've also run across the nice pelican case style setups. While the pelican case will definitely protect the KX2 it seems like a bulky solution while hiking. When I activated a couple SOTA"s last summer I took my KX3 with the side panels/cover. I just wrapped it with a towel and stuck it in my back pack. While it worked I didn't think it was the best solution. What are others doing? Rich - N5ZC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to va3on.li...@gmail.com ------------------------------ Message: 2 Date: Wed, 7 Feb 2018 15:47:29 -0800 From: "Mike Flowers" <mike.flow...@gmail.com> To: <elecraft@mailman.qth.net> Subject: Re: [Elecraft] Old Posts Message-ID: <0c2101d3a06e$04ca4d50$0e5ee7f0$@gmail.com> Content-Type: text/plain; charset="utf-8" Everything old is new again ... - 73 and good DX de Mike, K6MKF, Past President - NCDXC > -----Original Message----- > From: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] On Behalf Of David Gilbert > Sent: Wednesday, February 07, 2018 3:31 PM > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Old Posts > > > I'm waiting for the posts about old posts to start showing up as old > posts in my inbox. > > Dave AB7E > > > On 2/7/2018 1:03 PM, Kev Schache wrote: > > I'm also receiving the old posts > > > > Kev VK5KS > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net Please help support this > > email > > list: http://www.qsl.net/donate.html Message delivered to > > xda...@cis-broadband.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > mike.flow...@gmail.com ------------------------------ Message: 3 Date: Wed, 7 Feb 2018 15:57:55 -0800 From: "Lynn W. Taylor, WB6UUT" <kx...@coldrockshotbrooms.com> To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Old Posts Message-ID: <3849dd45-9424-5165-2f21-08807e0fe...@coldrockshotbrooms.com> Content-Type: text/plain; charset=utf-8; format=flowed If this thread lasts long enough, it could still be going when the first posts reappear. On 2/7/2018 3:47 PM, Mike Flowers wrote: > Everything old is new again ... > > - 73 and good DX de Mike, K6MKF, Past President - NCDXC > >> -----Original Message----- >> From: elecraft-boun...@mailman.qth.net [mailto:elecraft- >> boun...@mailman.qth.net] On Behalf Of David Gilbert >> Sent: Wednesday, February 07, 2018 3:31 PM >> To: elecraft@mailman.qth.net >> Subject: Re: [Elecraft] Old Posts >> >> >> I'm waiting for the posts about old posts to start showing up as old >> posts in my inbox. >> >> Dave AB7E >> >> >> On 2/7/2018 1:03 PM, Kev Schache wrote: >>> I'm also receiving the old posts >>> >>> Kev VK5KS >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net Please help support this >>> email >>> list: http://www.qsl.net/donate.html Message delivered to >>> xda...@cis-broadband.com >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this >> email list: http://www.qsl.net/donate.html Message delivered to >> mike.flow...@gmail.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > kx...@coldrockshotbrooms.com > ------------------------------ Message: 4 Date: Wed, 7 Feb 2018 19:27:50 -0500 From: Nr4c <n...@widomaker.com> To: Roger D Johnson <n...@roadrunner.com> Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] Selectivity Message-ID: <b48821f5-4778-4617-bb6f-1ba13d67f...@widomaker.com> Content-Type: text/plain; charset=utf-8 ?Selectivity???? Do you mean DSP filter width? Narrow width does decrease the background noise. Sent from my iPhone ...nr4c. bill > On Jan 30, 2018, at 4:05 PM, Roger D Johnson <n...@roadrunner.com> wrote: > > I noticed that during the contest, that if I selected 50 or 100 Hz > selectivity, the audio would drop way down. It didn't used to be this way. I tried reloading an earlier version of the software but couldn't figure out how to do it. > > Hope this comes through, finally! > > > 73, Roger > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > n...@widomaker.com ------------------------------ Message: 5 Date: Wed, 7 Feb 2018 19:39:57 -0500 From: Nr4c <n...@widomaker.com> To: "Dave Cole (NK7Z)" <d...@nk7z.net> Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] ALC and Solid State Amps... Message-ID: <5d920755-c85f-4cc4-936b-29fab24b8...@widomaker.com> Content-Type: text/plain; charset=utf-8 Just don?t do it. Sent from my iPhone ...nr4c. bill > On Feb 4, 2018, at 2:18 PM, Dave Cole (NK7Z) <d...@nk7z.net> wrote: > > I have asked on and off about ALC over the past few months, and I think I want to use ALC as a safeguard to amp overdriving as an error, not as a way of obtaining compression. That said-- is the K3 ALC input directly compatible with the ALC from the ALS-1306? > > i.e. Is anyone using ALC on an ALS-1306, and a K3? If so, did you just plug the two together, or did you need to interface them in some way? > > -- > 73s and thanks, > Dave > NK7Z > http://www.nk7z.net > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > n...@widomaker.com ------------------------------ Message: 6 Date: Wed, 7 Feb 2018 18:51:14 -0600 From: Bob McGraw K4TAX <rmcg...@blomand.net> To: elecraft@mailman.qth.net Subject: Re: [Elecraft] ALC and Solid State Amps... Message-ID: <bfce3c51-fb1a-4bd5-bcec-cbc740ba4...@blomand.net> Content-Type: text/plain; charset=utf-8; format=flowed As a general practice, most do not recommend using ALC from the amp to the transceiver.??? ALC is not a "compression" mode and should not be used as such.?? The ALC performance in modern transceivers will usually be superior in performance to the voltage derived in the amp and then processed by the transceiver to control drive power. The amp should have adequate safeguards designed in to prevent overdrive and alert the operator of such occurrence. 73 Bob, K4TAX K3S - sn 10163 On 2/7/2018 6:39 PM, Nr4c wrote: > Just don?t do it. > > Sent from my iPhone > ...nr4c. bill > > >> On Feb 4, 2018, at 2:18 PM, Dave Cole (NK7Z) <d...@nk7z.net> wrote: >> >> I have asked on and off about ALC over the past few months, and I think I want to use ALC as a safeguard to amp overdriving as an error, not as a way of obtaining compression. That said-- is the K3 ALC input directly compatible with the ALC from the ALS-1306? >> >> i.e. Is anyone using ALC on an ALS-1306, and a K3? If so, did you just plug the two together, or did you need to interface them in some way? >> >> -- >> 73s and thanks, >> Dave >> NK7Z >> http://www.nk7z.net >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this >> email list: http://www.qsl.net/donate.html Message delivered to >> n...@widomaker.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > rmcg...@blomand.net ------------------------------ Message: 7 Date: Wed, 7 Feb 2018 19:57:25 -0500 From: "Eric Rosenberg" <ericrosenberg...@gmail.com> To: "elecraft@mailman qth. net" <elecraft@mailman.qth.net> Subject: [Elecraft] Old Posts Explained Message-ID: <0b7501d3a077$c922f4a0$5b68dde0$@gmail.com> Content-Type: text/plain; charset="us-ascii" This list wasn't the only one impacted. I'm the lit admin for the PVRC reflector. We had the sdame issues: Here's the explanation from KA9FOX of QSL.NET: The QSL.net box (which hosts the mailman.qth.net mailing lists) had some file system corruption that wasn't immediately apparent. This was causing some queue issues. Now all resolved, but a bunch of randomly held messages over the last week did get let loose. ------------------------------ Message: 8 Date: Wed, 7 Feb 2018 19:04:38 -0600 From: Bob McGraw K4TAX <rmcg...@blomand.net> To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Selectivity Message-ID: <3c037a9c-816d-2fb1-e052-939b75cc5...@blomand.net> Content-Type: text/plain; charset=utf-8; format=flowed Are you using or boosting the receive EQ in CW mode??? I believe at lower BW settings the EQ will be negated thus you are losing the effects of the applied boost.?? As an operating practice, little to no RX EQ should be used for CW mode as EQ typically creates phase effects impacting harmonic content of the audio signal.??? It is always much better to "attenuate" as opposed to "boost". 73 Bob, K4TAX On 2/7/2018 6:27 PM, Nr4c wrote: > ?Selectivity???? > > Do you mean DSP filter width? > > Narrow width does decrease the background noise. > > Sent from my iPhone > ...nr4c. bill > > >> On Jan 30, 2018, at 4:05 PM, Roger D Johnson <n...@roadrunner.com> wrote: >> >> I noticed that during the contest, that if I selected 50 or 100 Hz >> selectivity, the audio would drop way down. It didn't used to be this way. I tried reloading an earlier version of the software but couldn't figure out how to do it. >> >> Hope this comes through, finally! >> >> >> 73, Roger >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this >> email list: http://www.qsl.net/donate.html Message delivered to >> n...@widomaker.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > rmcg...@blomand.net ------------------------------ Message: 9 Date: Wed, 7 Feb 2018 19:53:04 -0600 From: John Harper <johna...@gmail.com> To: Elecraft list <elecraft@mailman.qth.net> Subject: [Elecraft] KX2 Travel Case for Portable Operation Message-ID: <CAPHmH=nqchov6y+vbb4m0j4eiafeoz7uaidg6na63xvqatv...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" I use a B&W case. Similar to Pelican but less $$$: https://www.amazon.com/gp/product/B00H24Y5JO/ref=as_li_tl?ie=UTF8&tag=inmit0 1-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00H24Y5JO&linkId=099 e952762e7ec0340df34adbbc3b9de Here's how it looks with the tiny foam blocks removed to accomodate a KX2, paddles, etc: https://www.dropbox.com/s/nr8rdgdop41a2ia/B%26W1000.jpg?dl=0 John AE5X https://ae5x.blogspot.com ------------------------------ Message: 10 Date: Wed, 7 Feb 2018 20:47:30 -0500 From: W1PEF <w1...@myfairpoint.net> To: elecraft@mailman.qth.net Subject: [Elecraft] Ordered KPA1500 on 8/30 Message-ID: <1342efbf-444b-40e9-aa5b-7ca258ef6...@myfairpoint.net> Content-Type: text/plain; charset=us-ascii Just FYI ordered on 8/30 but over charged. Deposit/adjustment on 9/5 with apology from Elecraft. No call here yet for the KPA1500. Paul - W1PEF Sent from my iPhone ------------------------------ Message: 11 Date: Wed, 7 Feb 2018 21:07:21 -0500 From: Carl Yaffey <cyaf...@gmail.com> To: W1PEF <w1...@myfairpoint.net>, David Blake via Elecraft <elecraft@mailman.qth.net> Subject: Re: [Elecraft] Ordered KPA1500 Message-ID: <4e711da9-a1d4-4de7-8a2e-5cb48908c...@gmail.com> Content-Type: text/plain; charset=us-ascii Ordered 8/24/17. No call yet. > On Feb 7, 2018, at 8:47 PM, W1PEF <w1...@myfairpoint.net> wrote: > > Just FYI ordered on 8/30 but over charged. Deposit/adjustment on 9/5 with apology from Elecraft. No call here yet for the KPA1500. > Paul - W1PEF > > Sent from my iPhone > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > cyaf...@gmail.com Carl Yaffey K8NU Recording studio. cyaffeyno_s...@gmail.com 614 268 6353, Columbus OH http://www.carl-yaffey.com http://www.grassahol.com http://www.bluesswing.com ------------------------------ Message: 12 Date: Wed, 7 Feb 2018 21:09:40 -0500 From: Don Wilhelm <donw...@embarqmail.com> To: David Pratt <da...@g4dmp.co.uk>, elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 DTMF tones Message-ID: <3c6eaecf-8b10-5b6d-bace-bddbcb2bb...@embarqmail.com> Content-Type: text/plain; charset=windows-1252; format=flowed David, Are you certain the Kenwood mic is electret? Most are dynamic. Make certain the mic plug is wired for standard Kenwood pinout for HF mics, Some made for VHF rigs may be different. 73, Don W3FPR On 2/7/2018 9:47 AM, David Pratt wrote: > In an archived message Lyle KK7P said ..... > >> Currently, use of a DTMF-equipped microphone or generating the tones >> with an attached device. The K3 does not generate DTMF tones,although >> it could in a future firmware enhancement. >> >> 73, >> >> Lyle KK7P > > Well, in the absence of the long awaited DTMF software enhancement for > the K3 I have at last bought myself a Kenwood microphone, fitted with > an 8-pin plug that mates with the K3. But I have had no success in > getting the DTMF feature to work :-( > > As the Kenwood mic is electret I have switched bias on with MIC SEL > although, surprisingly, the microphone seems to work equally well with > it switched off! > > Does anyone know how to get the Kenwood DTMF mic to work with the K3? > ------------------------------ Message: 13 Date: Wed, 7 Feb 2018 20:09:56 -0600 From: Ed Gray W0SD <w...@triotel.net> To: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net> Subject: Re: [Elecraft] Ordered KPA1500 on 8/30 Message-ID: <532ca29a-6711-2849-7cfd-befd47817...@triotel.net> Content-Type: text/plain; charset=utf-8; format=flowed My Invoice is dated 8/29/2017 for the full amount.? I am sure we are all curious what the invoice date is of those being shipped with admittedly the warning that is not an absolute but it would give us that ordered some clues. Thanks! Ed W0SD On 2/7/2018 7:47 PM, W1PEF wrote: > Just FYI ordered on 8/30 but over charged. Deposit/adjustment on 9/5 with apology from Elecraft. No call here yet for the KPA1500. > Paul - W1PEF > > Sent from my iPhone > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w...@triotel.net > > > ------------------------------ Message: 14 Date: Thu, 8 Feb 2018 02:12:56 +0000 From: "hawley, charles j jr" <c-haw...@illinois.edu> To: "donw...@embarqmail.com" <donw...@embarqmail.com> Cc: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net> Subject: Re: [Elecraft] K3 DTMF tones Message-ID: <dbc91415-40b3-431b-88da-fa5de3f39...@illinois.edu> Content-Type: text/plain; charset="us-ascii" What mic model # ? Chuck Jack Sent from my iPhone, cjack > On Feb 7, 2018, at 8:09 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > > David, > > Are you certain the Kenwood mic is electret? Most are dynamic. Make certain the mic plug is wired for standard Kenwood pinout for HF mics, Some made for VHF rigs may be different. > > 73, > Don W3FPR > >> On 2/7/2018 9:47 AM, David Pratt wrote: >> In an archived message Lyle KK7P said ..... >> >>> Currently, use of a DTMF-equipped microphone or generating the tones >>> with an attached device. The K3 does not generate DTMF tones,although >>> it could in a future firmware enhancement. >>> >>> 73, >>> >>> Lyle KK7P >> >> Well, in the absence of the long awaited DTMF software enhancement for >> the K3 I have at last bought myself a Kenwood microphone, fitted with >> an 8-pin plug that mates with the K3. But I have had no success in >> getting the DTMF feature to work :-( >> >> As the Kenwood mic is electret I have switched bias on with MIC SEL >> although, surprisingly, the microphone seems to work equally well with >> it switched off! >> >> Does anyone know how to get the Kenwood DTMF mic to work with the K3? >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to c-haw...@illinois.edu ------------------------------ Message: 15 Date: Wed, 7 Feb 2018 18:29:26 -0800 From: "Rick Bates (WA6NHC)" <wa6...@gmail.com> To: Ed Gray W0SD <w...@triotel.net> Cc: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net> Subject: Re: [Elecraft] Ordered KPA1500 on 8/30 Message-ID: <b827d722-e14d-4dec-8b6e-bc22197ce...@gmail.com> Content-Type: text/plain; charset=us-ascii 08/25/17 @2:00 am. Paid in full. No call. Rick WA6NHC Smell Czech correction happen > On Feb 7, 2018, at 6:09 PM, Ed Gray W0SD <w...@triotel.net> wrote: > > My Invoice is dated 8/29/2017 for the full amount. I am sure we are all curious what the invoice date is of those being shipped with admittedly the warning that is not an absolute but it would give us that ordered some clues. > > Thanks! > > Ed W0SD > > >> On 2/7/2018 7:47 PM, W1PEF wrote: >> Just FYI ordered on 8/30 but over charged. Deposit/adjustment on 9/5 with apology from Elecraft. No call here yet for the KPA1500. >> Paul - W1PEF >> >> Sent from my iPhone >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w...@triotel.net >> >> >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wa6...@gmail.com ------------------------------ Message: 16 Date: Wed, 7 Feb 2018 20:51:54 -0600 From: "Torrey Mitchell" <torr...@q.com> To: <elecraft@mailman.qth.net> Subject: [Elecraft] Ordered 8/24 KPA-1500 Message-ID: <001001d3a087$c779be30$566d3a90$@q.com> Content-Type: text/plain; charset="us-ascii" Ordered my KPA-1500 online during the evening of 8/24.within a couple of minutes of receiving the Elecraft email allowing "pre-sale" to those who signed up on the list. Paid in full then. No call yet.but I'm very hopeful it may still come this week. 73 Torrey N9PY ------------------------------ Message: 17 Date: Wed, 7 Feb 2018 21:58:20 -0500 From: "Joe Subich, W4TV" <li...@subich.com> To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 DTMF tones Message-ID: <9e3ef3d8-cc4b-e366-0244-2631df602...@subich.com> Content-Type: text/plain; charset=utf-8; format=flowed Elecraft and Kenwood reverse the pin used for +8V that powers the DTMF encoder. You will need to move the wire on pin 5 of the Kenwood Foster plug to pin 6 to get the +8V from K3/K3s. The same is true if you want to use a Kenwood desk mic with built-in preamp or active equalizer (e.g., MC-60A, MC-80, MC-85, etc.) with the preamp or eq. 73, ... Joe, W4TV On 2/7/2018 9:09 PM, Don Wilhelm wrote: > David, > > Are you certain the Kenwood mic is electret?? Most are dynamic.? Make > certain the mic plug is wired for standard Kenwood pinout for HF mics, > Some made for VHF rigs may be different. > > 73, > Don W3FPR > > On 2/7/2018 9:47 AM, David Pratt wrote: >> In an archived message Lyle KK7P said ..... >> >>> Currently, use of a DTMF-equipped microphone or generating the tones >>> with an attached device. The K3 does not generate DTMF tones,although >>> it could in a future firmware enhancement. >>> >>> 73, >>> >>> Lyle KK7P >> >> Well, in the absence of the long awaited DTMF software enhancement for >> the K3? I have at last bought myself a Kenwood microphone, fitted with >> an 8-pin plug that mates with the K3. But I have had no success in >> getting the DTMF feature to work :-( >> >> As the Kenwood mic is electret I have switched bias on with MIC SEL >> although, surprisingly, the microphone seems to work equally well with >> it switched off! >> >> Does anyone know how to get the Kenwood DTMF mic to work with the K3? >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to li...@subich.com > ------------------------------ Message: 18 Date: Wed, 7 Feb 2018 22:01:44 -0500 From: Jim Miller <jtmille...@gmail.com> To: "Elecraft@mailman.qth.net" <Elecraft@mailman.qth.net> Subject: [Elecraft] KPA1500 ordered 8/24 Message-ID: <ce60e80a-1b7e-403a-8522-9a114c47f...@gmail.com> Content-Type: text/plain; charset=us-ascii Early notification received 9:14pm. Confirmation of full paid order received 9:34pm. No notice received yet. Jim ab3cv ------------------------------ Message: 19 Date: Wed, 07 Feb 2018 20:32:50 -0700 From: Lawrence obrowski <obrow...@ix.netcom.com> To: <elecraft@mailman.qth.net> Subject: [Elecraft] K3s Low sub receiver volume Message-ID: <a2f5e11b-8ffb-482d-8ab8-8c333f980...@contoso.com> Content-Type: text/plain; charset="utf-8" There have been a few posts on this subject, but none had answers. Both my main and sub receiver are on the same antenna. The audio volume from the sub is much lower. The AF for the main is?? let?s say at 9 o?clock?.. to get equal volume level from the sum? Sub AF has to be at 3-4 o?clock. RF on both are the same. Any suggestions? Is this normal? Larry W0LRF Lawrence Obrowski, C.P.E.A. Redstone Engineered Home Systems, Inc. 303 588 7233 www.redstonehomekits.com This communication (including any attachments) may contain privileged or confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this communication and/or shred the materials and any attachments and are hereby notified that any disclosure, copying, or distribution of this communication, or the taking of any action based on it, is strictly prohibited. ------------------------------ Message: 20 Date: Wed, 7 Feb 2018 22:43:05 -0500 From: Paul Van Dyke <pvandyke1...@gmail.com> Cc: "Elecraft@mailman.qth.net" <Elecraft@mailman.qth.net> Subject: Re: [Elecraft] KPA1500 ordered 8/24 Message-ID: <caepkcunbcggo28w+dva_v1gumr+wirdpmqgfxumc05h-vs7...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" ?From my understanding it may take up to a week just to work thru the 1st day... Please give them support, ?I am understanding the initial amount of orders were huge. AND they keep on coming Paul - KB9AVO <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=webmail> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Wed, Feb 7, 2018 at 10:01 PM, Jim Miller <jtmille...@gmail.com> wrote: > Early notification received 9:14pm. > > Confirmation of full paid order received 9:34pm. > > No notice received yet. > > Jim ab3cv > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to pvandyke1...@gmail.com > ------------------------------ Message: 21 Date: Wed, 7 Feb 2018 22:57:50 -0500 From: Neil Zampella <ne...@techie.com> To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Old Posts Message-ID: <56a35293-2b80-3737-8335-5c9ff24d4...@techie.com> Content-Type: text/plain; charset=utf-8; format=flowed PM Mail .. that brought back memories.? My OS/2 box was my main computer until it got to the point where I had no choice to move to Win7, because Win7 was as stable as OS/2 - eComStation.?? However, by that time I had moved from PM Mail (which was no longer being supported) to Thunderbird, haven't looked back. I think the reason old posts are are showing up was because for about a 4 or 5 day period, I didn't get a single thing from the list.?? I suspect that there was either a server issue, or something else that kept the email from being sent. Neil, KN3ILZ On 2/7/2018 3:49 PM, Jim Brown wrote: > On 2/7/2018 9:53 AM, Peter Eijlander (PA0PJE) wrote: >> I haven't seen any repeating mails here. >> I use Mozilla Thunderbird and POP3. I store mail locally and have it >> deleted on the mail server of my ISP so I don't sync with a remote >> server with IMAP as many others do. I prefer real mail over digests >> and immediately dump what I don't need. > > I've done exactly this since starting with email more than 20 years > ago. My first email client was PM Mail, running in OS/2. By the time I > migrated to NT, there was a Win version, and I stuck with it, which > might yield a clue about how long ago that was. :) I switched to > Thunderbird more than ten years ago. > > 73, Jim K9YC > > ------------------------------ Message: 22 Date: Thu, 8 Feb 2018 04:12:13 +0000 From: "hawley, charles j jr" <c-haw...@illinois.edu> To: Lawrence obrowski <obrow...@ix.netcom.com> Cc: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net> Subject: Re: [Elecraft] K3s Low sub receiver volume Message-ID: <d7c0d583-d4ed-408a-bf62-67fd2ef44...@illinois.edu> Content-Type: text/plain; charset="Windows-1252" Same matched filters? New or always been that way? Checked internal cables, fitment? Is it possible to adjust eq separate for each receiver? Chuck Jack Sent from my iPhone, cjack > On Feb 7, 2018, at 9:33 PM, Lawrence obrowski <obrow...@ix.netcom.com> wrote: > > There have been a few posts on this subject, but none had answers. > > > > Both my main and sub receiver are on the same antenna. > > The audio volume from the sub is much lower. > > The AF for the main is?? let?s say at 9 o?clock?.. to get equal volume level from the sum? Sub AF has to be at 3-4 o?clock. > > RF on both are the same. > > Any suggestions? Is this normal? > > > > Larry W0LRF > > > > > > Lawrence Obrowski, C.P.E.A. > > Redstone Engineered Home Systems, Inc. > > 303 588 7233 > > www.redstonehomekits.com > > > > This communication (including any attachments) may contain privileged or confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this communication and/or shred the materials and any attachments and are hereby notified that any disclosure, copying, or distribution of this communication, or the taking of any action based on it, is strictly prohibited. > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to c-haw...@illinois.edu ------------------------------ Message: 23 Date: Wed, 07 Feb 2018 21:18:54 -0800 From: Joan <joanpat...@me.com> To: Richard Thorne <rtho...@rthorne.net> Cc: Elecraft Reflector <elecraft@mailman.qth.net>, k...@yahoogroups.com Subject: Re: [Elecraft] KX2 Travel Case for Portable Operation Message-ID: <0bb95326-70e5-4291-ad2d-612cbdd81...@me.com> Content-Type: text/plain; charset=utf-8 I keep my KX2 in a Pelican 1300 case. It is a small but deep case?with enough depth to fit a 7 AHr 4-cell LiFePO4 battery and some kit in a bottom layer with the KX2 and more stuff on top. I plan to add a SideCarPlus memory keyer to that top layer. This is a waterproof go station for bike trailer or car camping and a bit heavy for backpacking ~joan kx2cw Darmok and Jalad at Tanagra, said Piglet. Shaka, when the walls fell, said Pooh. > On Feb 7, 2018, at 13:27, Richard Thorne <rtho...@rthorne.net> wrote: > > I've seen a few neat ideas on how to carry/use a KX2 in the field. > > I just picked up a very nice KX2 (Thanks WB5XX) that I plan on using for SOTA op's. It came with the SideKX end panels and the protective plastic cover. > > I was on a SOTA trip with WG0AT last September and he had a very nice tin that the KX2 fit in. It wasn't much bigger than the KX2. I've also run across the nice pelican case style setups. While the pelican case will definitely protect the KX2 it seems like a bulky solution while hiking. > > When I activated a couple SOTA"s last summer I took my KX3 with the side panels/cover. I just wrapped it with a towel and stuck it in my back pack. While it worked I didn't think it was the best solution. > > What are others doing? > > Rich - N5ZC > ------------------------------ Message: 24 Date: Wed, 7 Feb 2018 21:22:37 -0800 From: "Dave AD6A" <d...@ad6a.com> To: "'Elecraft Mailing List'" <elecraft@mailman.qth.net> Cc: 'Dave Fifield' <d...@fifield.name> Subject: [Elecraft] Free -- K1BKLTKIT - LCD Backlight Kit for a K1 Message-ID: <007501d3a09c$d52ced30$7f86c790$@ad6a.com> Content-Type: text/plain; charset="us-ascii" I was tidying up and found what appears to be an unused K1BKLTKIT - LCD Backlight Kit for a K1. Since I sold my K1 years ago, I'll give this away free to a good home. First person to reply gets it. Cheers es 72, Dave Fifield AD6A --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 25 Date: Wed, 7 Feb 2018 21:39:19 -0800 From: "Dave AD6A" <d...@ad6a.com> To: "'Dave AD6A'" <d...@ad6a.com>, "'Elecraft Mailing List'" <elecraft@mailman.qth.net> Subject: [Elecraft] "SOLD" - RE: Free -- K1BKLTKIT - LCD Backlight Kit for a K1 Message-ID: <008f01d3a09f$2a685080$7f38f180$@ad6a.com> Content-Type: text/plain; charset="us-ascii" "Sold" - that was quick - it's found a good home already folks. Cheers, Dave AD6A -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave AD6A Sent: Wednesday, February 07, 2018 9:23 PM To: 'Elecraft Mailing List' <elecraft@mailman.qth.net> Cc: 'Dave Fifield' <d...@fifield.name> Subject: [Elecraft] Free -- K1BKLTKIT - LCD Backlight Kit for a K1 I was tidying up and found what appears to be an unused K1BKLTKIT - LCD Backlight Kit for a K1. Since I sold my K1 years ago, I'll give this away free to a good home. First person to reply gets it. Cheers es 72, Dave Fifield AD6A --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@ad6a.com ------------------------------ Message: 26 Date: Thu, 8 Feb 2018 00:26:46 -0600 From: Scott <netbs...@gmail.com> To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3s Low sub receiver volume Message-ID: <7a734402-5d56-f7eb-99d6-ec5b773d6...@gmail.com> Content-Type: text/plain; charset=utf-8; format=flowed You may want to check that NR is the same (on or off) for both receivers. In my experience you may have NR off for the main and NR on for the sub. That will give you a "lower volume" for the sub. Also, check the attenuater is the same for both receivers too. Scott AD5HS On 2/7/2018 9:32 PM, Lawrence obrowski wrote: > There have been a few posts on this subject, but none had answers. > > > > Both my main and sub receiver are on the same antenna. > > The audio volume from the sub is much lower. > > The AF for the main is?? let?s say at 9 o?clock?.. to get equal volume level from the sum? Sub AF has to be at 3-4 o?clock. > > RF on both are the same. > > Any suggestions? Is this normal? > > > > Larry W0LRF > > > > > > Lawrence Obrowski, C.P.E.A. > > Redstone Engineered Home Systems, Inc. > > 303 588 7233 > > www.redstonehomekits.com > > > > This communication (including any attachments) may contain privileged or confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this communication and/or shred the materials and any attachments and are hereby notified that any disclosure, copying, or distribution of this communication, or the taking of any action based on it, is strictly prohibited. > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to netbs...@gmail.com > ------------------------------ Message: 27 Date: Thu, 8 Feb 2018 03:17:41 -0500 From: Buck <radiok...@gmail.com> To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3s Low sub receiver volume Message-ID: <eaf5bd27-ef04-2cd3-ccec-61df0581c...@gmail.com> Content-Type: text/plain; charset=utf-8; format=flowed Run the RF gain routine in the K3 utility on the sub receiver k4ia, Buck K3# 101 Honor Roll 8B DXCC EasyWayHamBooks.com On 2/8/2018 1:26 AM, Scott wrote: > You may want to check that NR is the same (on or off) for both > receivers.? In my experience you may have NR off for the main and NR on > for the sub.? That will give you a "lower volume" for the sub.? Also, > check the attenuater is the same for both receivers too. > > Scott > AD5HS > > On 2/7/2018 9:32 PM, Lawrence obrowski wrote: >> There have been a few posts on this subject, but none had answers. >> >> >> Both my main and sub receiver are on the same antenna. >> >> The audio volume from the sub is much lower. >> >> The AF for the main is?? let?s say at 9 o?clock?.. to get equal volume >> level from the sum? Sub AF has to be at 3-4 o?clock. >> >> RF on both are the same. >> >> Any suggestions? Is this normal? >> >> >> Larry W0LRF >> >> >> >> Lawrence Obrowski, C.P.E.A. >> >> Redstone Engineered Home Systems, Inc. >> >> 303 588 7233 >> >> www.redstonehomekits.com >> >> >> This communication (including any attachments) may contain privileged >> or confidential information intended for a specific individual and >> purpose, and is protected by law.? If you are not the intended >> recipient, you should delete this communication and/or shred the >> materials and any attachments and are hereby notified that any >> disclosure, copying, or distribution of this communication, or the >> taking of any action based on it, is strictly prohibited. >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to netbs...@gmail.com >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to radiok...@gmail.com ------------------------------ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must be a subscriber to post. Elecraft web page: http://www.elecraft.com End of Elecraft Digest, Vol 166, Issue 8 **************************************** ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to wa7...@hotmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com