Hello Berth-Olof,
I got new version of my MBM based board with 4Gb ready hw mods. Thanks
you again. At least it boots into uefi shell :)
Could you please figure out point in uefi sources i should look into to
get 4Gb config working?
Thanks
16.06.2016 12:23, Berth-Olof Bergman пишет:
Yes, you need to do changes in UEFI sources.
Best regards,
B-O
16 juni 2016 kl. 10:10 skrev Grigory V. Korotov <gri...@mail.ru>:
So i just need to connect A15 and solder higher dencity chips?
Should i do any changes in uefi sources?
16.06.2016 9:52, Berth-Olof Bergman пишет:
It would be possible if DRAM A15 is connected, which it isn't on Minnowboard
Max and Turbot. It would also be possible to use 8GB DRAM if channel 2 signals
is connected. Our Minnowboard Quattro (4 cores) supports 1GB, 2GB, 4GB and 8 GB
configurations. We also have an integrated nanoSSD on board, ranging from 8GB
to 64GB.
Best regards,
B-O Bergman
Winzent Technologies
16 juni 2016 kl. 08:45 skrev Grigory V. Korotov <gri...@mail.ru>:
Hi!
Is it possible to replace currently used ddr3 chips by higher dencity chips
without rerouting pcb to get total 4Gb of Ram?
Thanks
Grigory.
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard@lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard@lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard@lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard@lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard@lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
