I recently bought a Kworld 435Q ATSC USB tuner. After plugging it in with my
kernel 2.6.26, no drivers attached. I cracked open the case, and saw
ATSC_340U Ver:B on the PCB. I then googled the USB ID (1b80:a340), and ran
across this listing. I downloaded the latest em28xx-new driver from
I just applied the patch and built and installed the drivers. After some
initial headaches I was able to load the driver. I have 2 issues first I
can run a scan on cable using QAM256 and that works just fine, but I don't
see any channels when I hook up my antenna and run a 8VSP scan. I also
On Mon, Feb 09, 2009 at 10:43:43AM +0100, Markus Rechberger wrote:
[snip]
try to not load the em28xx-aad driver!
The problem is that:
$ build.sh load
will load it
___
Em28xx mailing list
Em28xx@mcentral.de
On Mon, Feb 09, 2009 at 12:04:50PM +, making...@gmail.com wrote:
I also do not see a /dev/video, I am not too familiar with the
em28xx-new driver, so is there something I am missing.
It doesn't have /dev/video
scan and create ~/.azap/channels.conf
$ azap -r WABC-HD
using
Can I use it in mythtv?
On Mon, Feb 9, 2009 at 2:22 PM, ac...@fastmail.fm wrote:
On Mon, Feb 09, 2009 at 12:04:50PM +, making...@gmail.com wrote:
I also do not see a /dev/video, I am not too familiar with the
em28xx-new driver, so is there something I am missing.
It doesn't have
I will try and figure it out tonight. Thanks.
On Mon, Feb 9, 2009 at 3:10 PM, ac...@fastmail.fm wrote:
On Mon, Feb 09, 2009 at 02:58:21PM -0500, Mathew King wrote:
Can I use it in mythtv?
I've never used mythtv, but I would think so. What I wrote in the
last email applies to all dvb
I never got the 8vsb to work but its ok for me because I found that I get
some more channels using QAM256 and cable.
Mythtv setup was pretty simple, myth recognized the dvb device, then I was
able to run a scan from myth.
Thank you for all your help!!
On Mon, Feb 9, 2009 at 3:19 PM, Mathew King