Hi,
I am interested in using Org mode to create a personal wiki (along the
lines of Wikidpad: http://wikidpad.sourceforge.net/ ), treating top
level headings (one star) as wiki topics.
To do this, I have added 2 behaviours to Org-mode.
1. Always narrow to subtree after following an internal
Hi Samuel
On Thu, Feb 5, 2009 at 5:54 PM, Samuel Wales samolog...@gmail.com wrote:
Thanks for trying it.
Your screenshot looks good, but I don't get that using the preferences
panel. I am using Tiger.
Ah, that might explain it. Lots of little annoyances got fixed in
Leopard (a few other
With org-log-done set to t or 'time and
org-cycle-separator-lines set to 0 or 1, on a node with no
body, org-done inserts a time log item with a blank line after
it. This causes the blank line to show in the collapsed
outline.
Perhaps org-done could check for the presence of a body
before
Closely related: the CLOSED timestamp does not insert a blank line.
For consistency with the above, perhaps it can insert a blank line if
and only if there is a body.
I would also propose minor changes:
- all such, including CLOSED
On Thu, Feb 5, 2009 at 22:44, Samuel Wales
Incomplete message.
- All such, including CLOSED, could possibly be - items for consistency.
- Depending on settings, neither left flush nor aligned under the
heading, but indented by 2, to allow noting visually that they are
items, works best for me, as then they are in a consistent
Can you mail the exact statement you used to add org-mode to .emacs
please?
Sorry Manish, I was out.
I added following to my .emacs:
(add-to-list 'load-path D:/Software/office/emacs/org-6.21b/org-6.21b)
(require 'org-install)
;; The following lines are always needed. Choose your own keys.
On Fri, Feb 6, 2009 at 12:45 PM, Saurabh Agrawal wrote:
Can you mail the exact statement you used to add org-mode to .emacs
please?
Sorry Manish, I was out.
I added following to my .emacs:
(add-to-list 'load-path D:/Software/office/emacs/org-6.21b/org-6.21b)
Please replace the line above
Hi Samuel,
I tried to reproduce this on my powerbook with 10.5 in
both Firefox and Safari and could not.
- Carsten
On Feb 5, 2009, at 9:06 PM, Samuel Wales wrote:
I have an issue with worg, which is that it is unreadable.
The R tutorial, Carsten's beginner's guide, and
I cannot reproduce this.
- Carsten
On Feb 5, 2009, at 2:05 PM, Rainer Stengele wrote:
I have a problem exporting html and directly browsing the exported
file.
I have my org file in a indirect buffer,
Pressing C-c C-e b results in:
Exporting... [2 times]
save-restriction: Args out of
Hi Leo,
I am afraid there is no good solution to this problem, you can
always look at this two ways.
Would you like to suggest a place where this behavior
could be documented?
- Carsten
On Feb 4, 2009, at 4:34 PM, Leo wrote:
On 2009-02-04 14:22 +, Carsten Dominik wrote:
On Feb 4, 2009,
Hi Sebastian,
this is an unlucky combination of you having turned
on org-export-with-latex-fragments, \[ being a LaTeX math
delimiter, \\[ showing up in your example, and HTML export
not checking for protectedness in export while searching
for LaTeX fragments.
I have fixed the forth issue so
Yes, I'm currently looking through the CSS and I found, the line-height
was in pixels.
Should be `em' to adjust automatically.
Fixed that and pushed it to Worg. Please tell us if that helps.
Regards,
Sebastian
Samuel Wales samolog...@gmail.com writes:
Thanks for trying it.
Your
--- Gio 5/2/09, Bernt Hansen be...@norang.ca ha scritto:
Ah - you don't have transient mark mode set.
[...]
Uh! thanks Bernt you're right.
:-(
--- Ven 6/2/09, Carsten Dominik domi...@science.uva.nl ha scritto:
On Feb 5, 2009, at 3:08 PM, Giovanni Ridolfi wrote:
have you seen Bernt's message
The idea of helping to ease org customizations is good and will reduce
the barrier to entry to new persons.
But it seems that 40 is too large for the new user and too small for
the power user.
Instead if we split up org usage into some broad categories, the
relevant customizations for that would
On Fri, Feb 6, 2009 at 1:35 PM, Manish mailtomanish.sha...@gmail.com wrote:
On Fri, Feb 6, 2009 at 12:45 PM, Saurabh Agrawal wrote:
Can you mail the exact statement you used to add org-mode to .emacs
please?
Sorry Manish, I was out.
I added following to my .emacs:
(add-to-list 'load-path
On Feb 6, 2009, at 8:47 AM, Carsten Dominik wrote:
On Feb 5, 2009, at 7:04 PM, sran...@gmail.com wrote:
Greetings:
This is a small issue. I've just installed Org-6.21b, upgrading
from Org-6.09 (yes, I'm behind). At the top of an org file I export
to html, I have the -*- mode: org; -*-
Here is a little code snippet for setting up the org-agenda-files
variable via elisp code, to only include files modified in the last X
days.
I use this, because I have ~500 org files and if I add all of them to
org-agenda-files then creating agenda buffers takes up just too much
time[1], and it
Then check Org version again please.
It is still 6.16... :(
Can you please mail me your complete .emacs, the location where you
unzipped the org-mode package and what additional steps you took to
install the package (like make etc.), if any?
Hi Manish, thanks for all the help. Here is
Hi Tom,
I am now looking at org-decision and start to integrate it.
There is one point I'd like to discuss.
My preferred way to do the integration is opening a new hacking door
which will not require changes to org.el for other people doing
similar stuff.
So my idea would be to search for
Rainer Stengele schrieb:
I have a problem exporting html and directly browsing the exported file.
I have my org file in a indirect buffer,
Pressing C-c C-e b results in:
Exporting... [2 times]
save-restriction: Args out of range: 0, 1
org version: 6.21b
GNU Emacs 23.0.60.1
On Fri, 6 Feb 2009 00:38:07 +0100
Christopher Kuettner ckuett...@gmail.com wrote:
Using org together with auto-fill. Whenever I hit (C-c c) to update
my file-specific #+TAGS: settings, org exits auto-fill. I than have
to re-enter auto-fill. Why? Is this a bug?
hmm. doesn't happen here. I
Using org together with auto-fill. Whenever I hit (C-c c) to update
my file-specific #+TAGS: settings, org exits auto-fill. I than have
to re-enter auto-fill. Why? Is this a bug?
- Christopher
___
Emacs-orgmode mailing list
Remember: use `Reply
Something I've been working on and am continuing to work on is kinda a
middleware script like what you're doing. It's in python now - and have a
few who contacted me personally who are interested in this once I get the
refactor complete.
Basically what I've done is try to merge stuff in from our
Carsten Dominik domi...@science.uva.nl writes:
Bernt, or any other git guru, how can I find
out when I changed that default? I am sure there
is a clever way to do this?
$ git log -S'string to find'
or
$ git gui blame FILE
- find the line you are interested in
- right click on it
On Feb 3, 2009, at 11:50 AM, Flávio wrote:
I am using COLUMN VIEW to see a summary of worked and estimated hours.
But I am
getting some strange results.
In one big org file I clocked all my work in different atomic tasks
(The file is mixed with English and Portuguese ).
For example:
*
Hi Samuel,
I cannot reproduce this.
- Carsten
On Feb 6, 2009, at 6:44 AM, Samuel Wales wrote:
With org-log-done set to t or 'time and
org-cycle-separator-lines set to 0 or 1, on a node with no
body, org-done inserts a time log item with a blank line after
it. This causes the blank line to
On Feb 3, 2009, at 1:06 AM, Hsiu-Khuern Tang wrote:
Hi all,
I have a table where one column consists of inactive dates, such as
this:
| Date | OK? |
|--+-|
| [2009-01-30 Fri] | x |
| [2009-01-27 Tue] | x |
| [2009-01-28 Wed] | x |
I can't
Hi Carsten
On Fri, Feb 6, 2009 at 1:38 AM, Carsten Dominik domi...@science.uva.nl wrote:
I guess you are right that this should work differently,
but it is not as easy to fix as I thought. It is on my
list, though.
OK, I understand. Thanks for looking into it. I really appreciate the
effort
On Fri, Feb 6, 2009 at 7:08 AM, Carsten Dominik domi...@science.uva.nl wrote:
CHOOSEas the prefix
choseness as the interpretation
org-decision as the name of the module.
My request would be to maybe use `choose' also as the
interpretation symbol, or, alternatively, CHOSENESS
as the
Sebastian Rose sebastian_r...@gmx.de writes:
The Problem does not occur in LaTeX export. That works fine.
Hm.
This one is FIXED by Carsten already. Just to note that here.
Thank's Carsten,
--
Sebastian Rose, EMMA STIL - mediendesign, Niemeyerstr.6, 30449 Hannover
Tel.: +49 (0)511 - 36
* On Fri 03:53PM +, 06 Feb 2009, Carsten Dominik (domi...@science.uva.nl)
wrote:
On Feb 3, 2009, at 1:06 AM, Hsiu-Khuern Tang wrote:
Hi all,
I have a table where one column consists of inactive dates, such as
this:
| Date | OK? |
|--+-|
David,
This sound interesting and similar to what I am doing. I didn't
want to have to parse the Org file but it may be that I have no
choice in the matter.
I may be able to make some of this easier on myself by putting all
(or most) generated information in a block of some kind that allows
me
On Sat, Feb 7, 2009 at 12:24 AM, Mark Elston wrote:
[...]
My biggest concern is keeping any notes I add to items I have
extracted from these various sources during an update process.
I tried the org-registry package mentioned by Samuel but it didn't
load and initialize.
I haven't had a
On Fri, Feb 6, 2009 at 6:37 PM, Saurabh Agrawal wrote:
Then check Org version again please.
It is still 6.16... :(
Can you please mail me your complete .emacs, the location where you
unzipped the org-mode package and what additional steps you took to
install the package (like make etc.),
Manish,
I actually have it printed out and am going through it.
One of the reasons I would prefer to keep notes *with* the
entries I generate is that I would like to eventually export
both the entries and notes to a file I can print out and take
with me to meetings. Either LaTeX export or text
Hi Tom,
[...]
WIth you patch, we have right now
CHOOSEas the prefix
choseness as the interpretation
org-decision as the name of the module.
My request would be to maybe use `choose' also as the
interpretation symbol, or, alternatively, CHOSENESS
as the prefix.
Yes. I think choose
You were adding to the end of the load path, and emacs was using the
first copy it came to (the one included in emacs).
You could try something like this instead...
(setq load-path-orig load-path)
(setq load-path
(append
(list
On Fri, Feb 6, 2009 at 08:42, Carsten Dominik domi...@science.uva.nl wrote:
I cannot reproduce this.
I assumed that it would be reproducible, apologies.
org-add-planning-info sees outline-regexp and inserts \n. I do not
comprehend the code.
___
Samuel Wales samolog...@gmail.com writes:
On Fri, Feb 6, 2009 at 08:42, Carsten Dominik domi...@science.uva.nl wrote:
I cannot reproduce this.
I assumed that it would be reproducible, apologies.
org-add-planning-info sees outline-regexp and inserts \n. I do not
comprehend the code.
Have
outline-regexp is a variable defined in `outline.el'.
Its value is \\*+
Local in buffer todo-new.org; global value is [*\f]+
Automatically becomes buffer-local when set in any fashion.
--
___
Emacs-orgmode mailing list
Remember: use `Reply All' to
Samuel Wales samolog...@gmail.com writes:
outline-regexp is a variable defined in `outline.el'.
Its value is \\*+
Local in buffer todo-new.org; global value is [*\f]+
Automatically becomes buffer-local when set in any fashion.
--
Okay - I guess that's not it. Your value matches mine for
I can't reproduce this either.
-Bernt
Carsten Dominik domi...@science.uva.nl writes:
Hi Samuel,
I cannot reproduce this.
- Carsten
On Feb 6, 2009, at 6:44 AM, Samuel Wales wrote:
With org-log-done set to t or 'time and
org-cycle-separator-lines set to 0 or 1, on a node with no
body,
I have written an article about a Python script I wrote
to reformat the agenda view into a compact format for printing
as my daily action plan.
http://members.optusnet.com.au/~charles57/GTD/agenda_reformatting.html
I am a Python novice, so I welcome feedback on the script.
Charles
in Sydney,
Obviously, I do not fully understand the initialization sequence for
EmacsW32. Could someone using EmacsW32 throw some more light on a
better procedure/technique to install Org-mode on it?
Hi,
I run the same installation of org in Xemacs Emacs on Windows+Cygwin
Linux/Unix.
Currently i
Chris McMahan cmcma...@one.net writes:
You were adding to the end of the load path, and emacs was using the
first copy it came to (the one included in emacs).
You could try something like this instead...
(setq load-path-orig load-path)
(setq load-path
(append
(list
Hi.
Consider a file with 2 lines:
--
heading
--
Place the cursor at line 2 (where you can type). Then use C-c C-x C-i to
start a clock.
You have now 3 lines:
--
heading
CLOCK: [2009-02-07 sáb 01:06]
--
I think I found a problem when exporting to Latex.
If my org file is like this:
* Blablablbalbala
1) Blablablbalbala
2) Blablablbalbala
#+BEGIN_EXAMPLE
sudo apt-get install openoffice.org-java-common
#+END_EXAMPLE
3) Blablablbalbala
4) Blablablbalbala
5) Blablablbalbala
When I
Hi, with this file:
* blabla
CLOCK: [2009-02-06 dv 09:39]--[2009-02-06 dv 10:12] = 0:33
c:if test=%= GroupPermission.contains(permissionChecker, group.getGroupId(),
ActionKeys.MANAGE_LAYOUTS) %
I see this
Hi Charles,
Charles Cave charles_c...@optusnet.com.au writes:
I have written an article about a Python script I wrote
to reformat the agenda view into a compact format for printing
as my daily action plan.
http://members.optusnet.com.au/~charles57/GTD/agenda_reformatting.html
Thanks for
HI Flavio (?),
Lists are made from indentation in the first place, I think. Hence the
#+BEGIN_EXAMPLE
breaks the list.
It would be OK to export it like that, since, funny enough, a `pre'
element is indeed allowed inside an `li' element in XHTML (it is _not_
allowed in a p element _and_ a ol
Hi Daniel,
I cannot reproduce this here.
Daniel Clemente n142...@gmail.com writes:
Hi, with this file:
* blabla
CLOCK: [2009-02-06 dv 09:39]--[2009-02-06 dv 10:12] = 0:33
c:if test=%= GroupPermission.contains(permissionChecker,
Hi, I need an org-agenda-custom-commands section for the following: list
all TODO entries, that are either scheduled for that day OR have #A
priority. Is it possible? Thanks in advance!
--
Richard
___
Emacs-orgmode mailing list
Remember: use `Reply
I have published several articles on org-mode over the last
few years but until now I haven't had an index page to the
collection.
Today I created the index page and here it is ...
http://members.optusnet.com.au/~charles57/GTD/
Charles
___
Mark
On Fri, Feb 6, 2009 at 12:54 PM, Mark Elston m.els...@advantest-ard.com wrote:
You say you are using Python. I have used Perl since I found a SOAP
package for Perl and I haven't seen one for Python and I need it for
accessing TestTrack. I would prefer Python otherwise.
Hi Daniel,
stuff you do not want interpreted should be protected as
an example, or with : at the beginning of the line.
If you do want this interpreted as HTML, put it into a BEGIN_HTML
block or so.
- Carsten
On Feb 7, 2009, at 1:23 AM, Daniel Clemente wrote:
Hi, with this file:
55 matches
Mail list logo
