Exporting org files and subtrees is awfully flexible, given all the
possible customizations, but for a long while I've occasionally felt the
need to come at the "export" process from the other direction: instead
of customizing the export appearance of a series of headings, instead
starting with a c
Hi Ista
i did do a byte compiling but that didnt help. i got this message when i
did byte compile
Compiling no file at Sat Aug 8 07:06:30 2015
Leaving directory `/home/zeltak/.emacs.d/elpa/ace-isearch-20150807.1803'
Compiling file /home/zeltak/.emacs.d/elpa/org-20150805/ob-R.el at Sat Aug
8 07:
As I mentioned, I'm getting that same error, not just with #+DATE but also
with #+TITLE, #+AUTHOR, etc. Any one of these is sufficient to break export
for me.
On Fri, Aug 7, 2015 at 3:59 PM, Alex Bennée wrote:
> Hi,
>
> I've been using org-mode as a source for my presentations but exporting
> br
I also just installed notmuch, in addition to mu4e, and so far I quite like
notmuch. The interface so far is a little more intuitive (with mu4e, for
instance, I kept getting tripped up hitting "r" to reply to a message and
finding that it's bound to something else).
I did get offlineimap working,
I'm getting a strange error whenever I try to export an org file,
and I'm not sure how to track down the cause. It seemed to start when I
upgraded to org 8.3.1, but it's hard to tell because this is the first
time I've exported anything in a week or so.
The error says:
(wrong-type-argument listp #
Hi Bastien, thanks a lot for your response but I finally solved the issue by
installing the package cm-super.
Cheers,
Martin
> From: b...@gnu.org
> To: mart...@hotmail.com
> CC: emacs-orgmode@gnu.org
> Subject: Re: fontenc makes pdf non-searchable
> Date: Wed, 5 Aug 2015 02:00:52 +0200
>
> Hi M
On Fri, Aug 7, 2015 at 6:56 PM, Suvayu Ali wrote:
> On Fri, Aug 07, 2015 at 05:40:55PM -0500, John Hendy wrote:
>>
>> It states that =C-c C-b= will prompt for beamer specific headlines;
>> this does not appear to work with the new ox-beamer export engine. I
>> see the command is =org-beamer-select
thanks, suvayu, how do i use this org element minor mode?
i get hangs quite frequently, for example when sorting in the outline buffer.
On Fri, Aug 07, 2015 at 05:40:55PM -0500, John Hendy wrote:
>
> It states that =C-c C-b= will prompt for beamer specific headlines;
> this does not appear to work with the new ox-beamer export engine. I
> see the command is =org-beamer-select-environment=. Did this get
> mapped to something else n
Hello,
I'm making the first beamer presentation in a while in which I've used
columns, and had to refresh myself on the syntax. I originally
referred to the original (legacy) beamer docs here simply due to it
being the first hit on my google search:
- http://orgmode.org/worg/exporters/beamer/tuto
On 8/7/15, Nicolas Goaziou wrote:
> Samuel Wales writes:
>> should (get-text-property (point-at-bol) :org-comment) be nil on a
>> commented headline?
>
> Yes, once `org-agenda-prepare-buffers' has been called.
ok, then i don't understand the code. (i thought that was how it
determined whether i
On 8/7/15, Nicolas Goaziou wrote:
> Samuel Wales writes:
>> should (get-text-property (point-at-bol) :org-comment) be nil on a
>> commented headline?
>
> Yes, once `org-agenda-prepare-buffers' has been called.
then i didn't understand the code. (i thought that was how it
determined whether it w
thank you.
i compiled it and tried it. it seems improved, to maybe 2.5s.
- command-execute 17977 99%
- call-interactively 17977 99%
- org-agenda-switch-to16144 88
Hi,
I've been using org-mode as a source for my presentations but exporting
broke today following an ELPA update. It seems the line:
#+DATE: KVM Forum 2015
Is no longer acceptable. I think this changed as of:
ae9db17482a183e5613428c3abf1c691f86b4ac0
I'm not quite sure what the new "parse" is e
We discussed this already in another thread[0]. The upshot was run
"M-x byte-compile-file" on ob-R.el.
Best,
Ista
[0] https://www.mail-archive.com/emacs-orgmode@gnu.org/msg98762.html
On Fri, Aug 7, 2015 at 12:47 PM, Xebar Saram wrote:
>
> Thx for the response Bastien
>
> i removed (require 'org-
> > On Tue, 4 Aug 2015, Tamas Papp wrote:
> >
> >> I would like to do the following: whenever I open the file in Emacs,
> >> I would like to eval all the source blocks under the heading Setup.
> >>
> >> I have found org-babel-execute-subtree, but I cannot figure out how
> >> to call it on the
On Fri, Aug 07, 2015 at 05:19:18PM +0100, Eric S Fraga wrote:
> On Friday, 7 Aug 2015 at 16:23, Rasmus wrote:
>
> [...]
>
> > I guess there would also be no loss from actually inserting a "%" after
> > \includegraphics[·]{·} in ox-latex.
>
> Except that then the suggestion I just made would not
On Fri, Aug 07, 2015 at 04:23:48PM +0200, Rasmus wrote:
> Suvayu Ali writes:
> > On Fri, Aug 07, 2015 at 02:28:58PM +0100, Eric S Fraga wrote:
> >> On Friday, 7 Aug 2015 at 06:24, Suvayu Ali wrote:
> >>
> >> > This is very nice, thank you! I think this will do it for me. I have a
> >> > small
Thx for the response Bastien
i removed (require 'org-install) from my init.el file (correct?) and
restarted emacs but get the same error
Invalid function: org-babel-header-args-safe-fn
i also tried now to downgrade to previous version from 3/8/15 and the error
is gone so its 100% reproducible wi
I hesitate to share this code (it's not very pretty right now), but I
have been working on two ideas that I think combine to solve problems
like this in a nicer (and lazier) fashion than the current approach:
headline properties and reverse inheritance.
Headline properties are simply about setting
On Friday, 7 Aug 2015 at 16:23, Rasmus wrote:
[...]
> I guess there would also be no loss from actually inserting a "%" after
> \includegraphics[·]{·} in ox-latex.
Except that then the suggestion I just made would not work and would in
fact be quite confusing as the second figure would be lost
Hi Xebar,
try removing (require 'org-install), it is not needed since long.
--
Bastien
Aha.. I am using a custom postamble for html:
(setq org-html-postamble t) ; default value = 'auto
(setq org-html-postamble-format
`(("en"
,(concat "Exported using "
;; "%c" is replaced with
`org-html-creat
Matt Price writes:
> can you just provide a skeletal example so I understand better wha that
> means? thanks so much!
There's an example in the manual. Here's another example:
In org:
#+begin: thanks :pretext "We have received valuable comments from"
#+end:
The function:
(defun
Hi Bastien
As requested here is a config just with only the base the orgmode section
(~ 10% of full config)
note- the original file is a org mode file which is converted to a .el file:
https://paste.xinu.at/Gr3KF/
i also use a simple init file (my config is in orgmode format)
https://paste.xinu
Suvayu Ali writes:
> On Fri, Aug 07, 2015 at 02:28:58PM +0100, Eric S Fraga wrote:
>> On Friday, 7 Aug 2015 at 06:24, Suvayu Ali wrote:
>>
>
>> [...]
>>
>> > This is very nice, thank you! I think this will do it for me. I have a
>> > small question, is there a better way to add a % after the
On Fri, Aug 7, 2015 at 9:01 AM, Nicolas Goaziou
wrote:
> Hello,
>
> Matt Price writes:
>
> > I have a headline like this:
> >
> > * Gradebook
> > :PROPERTIES:
> > :CUSTOM_ID: gradebook
> > :END:
> >
> > some content etc etc etc.
> >
> > I would like to be able to replace the contents of that hea
On Fri, Aug 07, 2015 at 10:01:42AM -0400, Kaushal wrote:
> @Fabrice Thanks for sharing your examples!
>
> @Suvayu I tried removing #+DATE: line.. but with that I don't see the date
> stamp in html exports. The advantage of {{{time(FORMAT)}}} is that I can
> also control the formatting of the date-
Xebar Saram writes:
> just updated org today and now i get this error on startup:
>
> Invalid function: org-babel-header-args-safe-fn
>
> is this related to the new release?
Can you reproduce the problem with a minimal configuration and share
this minimal configuration?
--
Bastien
On Fri, Aug 07, 2015 at 02:28:58PM +0100, Eric S Fraga wrote:
> On Friday, 7 Aug 2015 at 06:24, Suvayu Ali wrote:
>
> [...]
>
> > This is very nice, thank you! I think this will do it for me. I have a
> > small question, is there a better way to add a % after the first image
> > in the above c
On Tue, Aug 04 2015, Charles C. Berry wrote:
> On Tue, 4 Aug 2015, Tamas Papp wrote:
>
>> I would like to do the following: whenever I open the file in Emacs, I would
>> like to eval all the source blocks under the heading Setup.
>>
>> I have found org-babel-execute-subtree, but I cannot figure
@Fabrice Thanks for sharing your examples!
@Suvayu I tried removing #+DATE: line.. but with that I don't see the date
stamp in html exports. The advantage of {{{time(FORMAT)}}} is that I can
also control the formatting of the date-time stamp.
--
Kaushal Modi
On Fri, Aug 7, 2015 at 4:53 AM, Nico
you could do something like this:
http://kitchingroup.cheme.cmu.edu/blog/2015/07/09/Acronym-minor-mode-for-Emacs/
or this
http://kitchingroup.cheme.cmu.edu/blog/2015/06/22/Clickable-org-contacts-in-text-files/
with tooltips. It isn't clear to me why you would want it to appear when
you type it. Y
nothing automatic that I know of.
Xebar Saram writes:
> Hi
>
> I was wondering if there was an option in org to show number of sub headers
> in top level header. i know there is statistics cookies but that's not
> automatic?
>
> best
>
> Z
--
Professor John Kitchin
Doherty Hall A207F
Department
On Fri, Aug 07, 2015 at 03:22:32PM +0200, Rasmus wrote:
> Zack Piper writes:
>
> > Apparently ox-latex doesn't add `\newminted` to languages that I wish
> > to use.
> >
> > This is required to use:
> >
> > \begin{common-lispcode}
> > (format t "test")
> > \end{common-lispcode}
> >
> >
Hello,
Zack Piper writes:
> Apparently ox-latex doesn't add `\newminted` to languages that I wish
> to use.
>
> This is required to use:
>
> \begin{common-lispcode}
> (format t "test")
> \end{common-lispcode}
>
> That being the `${LANG}code` environment, which Org-mode uses for my
>
On Friday, 7 Aug 2015 at 06:24, Suvayu Ali wrote:
[...]
> This is very nice, thank you! I think this will do it for me. I have a
> small question, is there a better way to add a % after the first image
> in the above case other than adding a snippet?
>
> #+begin_figure
> #+attr_latex: :wid
Zack Piper writes:
> Apparently ox-latex doesn't add `\newminted` to languages that I wish
> to use.
>
> This is required to use:
>
> \begin{common-lispcode}
> (format t "test")
> \end{common-lispcode}
>
> That being the `${LANG}code` environment, which Org-mode uses for my
> entire d
Apparently ox-latex doesn't add `\newminted` to languages that I wish
to use.
This is required to use:
\begin{common-lispcode}
(format t "test")
\end{common-lispcode}
That being the `${LANG}code` environment, which Org-mode uses for my
entire document.
https://github.com/gpoore/mint
Hello,
Matt Price writes:
> I have a headline like this:
>
> * Gradebook
> :PROPERTIES:
> :CUSTOM_ID: gradebook
> :END:
>
> some content etc etc etc.
>
> I would like to be able to replace the contents of that headline
> automatically, but retain the properties.
(org-link-search "[[#gradebook
Hi
just updated org today and now i get this error on startup:
Invalid function: org-babel-header-args-safe-fn
is this related to the new release?
best
Z
Hello Nicolas,
> Sebastien Vauban writes:
>
>> I've noticed (for a couple of weeks) that I now get "C-c * is undefined"
>> when trying to recalculate an Org table [1].
>>
>> Has it somehow been removed?
>
> I don't think so, and I cannot reproduce it with a quick test. Do you
> have an ECM?
Blush
Hi,
I have a headline like this:
* Gradebook
:PROPERTIES:
:CUSTOM_ID: gradebook
:END:
some content etc etc etc.
I would like to be able to replace the contents of that headline
automatically, but retain the properties. Howeve,r if for some reason the
properites drawer is there I don't want to
Hello,
Sebastien Vauban
writes:
> I've noticed (for a couple of weeks) that I now get "C-c * is undefined"
> when trying to recalculate an Org table [1].
>
> Has it somehow been removed?
I don't think so, and I cannot reproduce it with a quick test. Do you
have an ECM?
Regards,
--
Nicolas
Hello,
I've noticed (for a couple of weeks) that I now get "C-c * is undefined"
when trying to recalculate an Org table [1].
Has it somehow been removed?
Current configuration:
- GNU Emacs 25.0.50.1 (x86_64-w64-mingw32) of 2015-07-25 on KAEL
- Org-mode version 8.3.1 (release_8.3.1-14-gac29de)
B
Nicolas Goaziou writes:
>> OK. I added it to plain-text as well. What is an example of a plain-text
>> that would need beautification?
>
> To tell the truth, I don't know why we need beautification in the first
> place. Bastien introduced it, so he may be able to answer.
To this extend; me nei
> OK. I added it to plain-text as well. What is an example of a plain-text
> that would need beautification?
To tell the truth, I don't know why we need beautification in the first
place. Bastien introduced it, so he may be able to answer.
> Should we apply it to snippets as well? In the spiri
Nicolas Goaziou writes:
> Hello,
>
> Rasmus writes:
>
>> Vladimir Alexiev writes:
>>
>>> I've set org-html-use-unicode-chars since I want ox-html to leave IRIs as
>>> IRIs.
>>> But this has another undesired effect: it breaks references in code,
>>> since it doesn't escape the brackets.
>>
>>
Hello,
Thomas S. Dye writes:
> A second patch is attached.
Thank you.
> From cb30697627afacc8950ef85b839f47d48371f39b Mon Sep 17 00:00:00 2001
> From: tsdye
> Date: Thu, 6 Aug 2015 12:08:34 -1000
> Subject: [PATCH 2/2] More date and time macro edits
I think the commit message is confusing ("
Samuel Wales writes:
> thank you for fixing.
>
> canonical is always what i want, except for occur-tree.
>
> i did profiler-start then went to org file a few times to average out
> the results. did i use the correct profiler?
You did.
>
> command-execute
On Do, 2015-08-06, Lei Zhe wrote:
[...]
> 2. When I call org-drill, some entries can not be shown. Only blank
> buffer shows up.
I'm having the same problem here since about 4 weeks. It seems to occur
randomly without relation to the entries.
Pressing e for “edit”, moving point some lines up o
Samuel Wales writes:
> should (get-text-property (point-at-bol) :org-comment) be nil on a
> commented headline?
Yes, once `org-agenda-prepare-buffers' has been called.
Regards,
Hi
I was wondering if there was an option in org to show number of sub headers
in top level header. i know there is statistics cookies but that's not
automatic?
best
Z
53 matches
Mail list logo
