Re: [O] R-generated images not showing
On 13 September 2019, William Denton wrote: It turns out I found the cause by accident! I've been using ./configure --with-imagemagick to configure Emacs before compiling it. I tried it without that option, and now the problem has gone away and images are displaying as they should. Aha ... and now that I've caught up with other messages I see the source of this problem has been identified. Bill -- William Denton :: Toronto, Canada --- Listening to Art: https://listeningtoart.org/ https://www.miskatonic.org/ --- GHG.EARTH: http://ghg.earth/ Caveat lector. --- STAPLR: http://staplr.org/
Re: [O] R-generated images not showing
On 11 September 2019, Nick Dokos wrote: The usual method is to bisect your setup-orgmode.el file: comment out the bottom half and if that makes it work, then you know that the problem is in the part that you commented out. Recursively, bisect further. My problem report wasn't very good, I admit. I was hoping someone might recognize the problem so I could avoid bisecting. Thanks for having a look at my config and taking some time to do some testing. It turns out I found the cause by accident! I've been using ./configure --with-imagemagick to configure Emacs before compiling it. I tried it without that option, and now the problem has gone away and images are displaying as they should. The details of how Org and images and ImageMagick work together are beyond me, but I hope noting this is useful. Bill -- William Denton :: Toronto, Canada --- Listening to Art: https://listeningtoart.org/ https://www.miskatonic.org/ --- GHG.EARTH: http://ghg.earth/ Caveat lector. --- STAPLR: http://staplr.org/
Re: [O] R-generated images not showing
William Denton writes: > This problem started for me a little while ago: images generated from R > source > blocks no longer appear even though I have images display turned on. > > For example, this file: > > # - > > #+begin_src R :results graphics file :file /tmp/src.png > x <- seq(-4, 4, length=200) > y <- dnorm(x, mean=0, sd=1) > plot(x,y, type = "l", lwd = 2, xlim = c(-3.5,3.5)) > #+end_src > > #+RESULTS: > [[file:/tmp/src.png]] > # - > > I don't see the image, I just see the text "file:/tmp/src.png". When > image-display is off (C-c C-x C-v) it becomes a link, and when I toggle it > back > on it's just plain text. > > The file on disk really is there and is a valid image. > > If I run the three R lines in an ESS window (M-x R) then the image pops up in > its own window, as normal. > > I ran "emacs -Q" and loaded up Org and enough Babel stuff to the source block > to > work, and the image appeared inline as it should! So it's something to do > with > my config [1] but I can't figure out what. > > Has anyone ever had this happen, or noticed it recently? I'm compiling Emacs > and Org from source and both are current. I'm not sure what the easiest way > to > identify the problem is. The usual method is to bisect your setup-orgmode.el file: comment out the bottom half and if that makes it work, then you know that the problem is in the part that you commented out. Recursively, bisect further. I downloaded your setup-org.el and tried it out. There are two things that I commend out: the (use-package org-bullets ...) stuff - the `emacs -Q -l setup-orgmode.el' complained about use-package and I was too lazy to add whatever is necessary to get it and the (add-hook 'org-mode-hook wrap-region-mode) stuff because I don't have wrap-region-mode installed. With those two deletions, I see no problem. I doubt that the problem is with org-bullets, so try getting rid of wrap-region-mode and see if that does the trick. Of course, it may be that there is some interaction between your Org mode setup and all the *other* setup that you do, but bisecting is still the way to go. > > Bill > > [1] https://github.com/wdenton/.emacs.d/blob/master/setup/setup-orgmode.el > > -- > William Denton :: Toronto, Canada --- Listening to Art: > https://listeningtoart.org/ > https://www.miskatonic.org/ --- GHG.EARTH: http://ghg.earth/ > Caveat lector. --- STAPLR: http://staplr.org/ > > -- Nick "There are only two hard problems in computer science: cache invalidation, naming things, and off-by-one errors." -Martin Fowler
[O] R-generated images not showing
This problem started for me a little while ago: images generated from R source blocks no longer appear even though I have images display turned on. For example, this file: # - #+begin_src R :results graphics file :file /tmp/src.png x <- seq(-4, 4, length=200) y <- dnorm(x, mean=0, sd=1) plot(x,y, type = "l", lwd = 2, xlim = c(-3.5,3.5)) #+end_src #+RESULTS: [[file:/tmp/src.png]] # - I don't see the image, I just see the text "file:/tmp/src.png". When image-display is off (C-c C-x C-v) it becomes a link, and when I toggle it back on it's just plain text. The file on disk really is there and is a valid image. If I run the three R lines in an ESS window (M-x R) then the image pops up in its own window, as normal. I ran "emacs -Q" and loaded up Org and enough Babel stuff to the source block to work, and the image appeared inline as it should! So it's something to do with my config [1] but I can't figure out what. Has anyone ever had this happen, or noticed it recently? I'm compiling Emacs and Org from source and both are current. I'm not sure what the easiest way to identify the problem is. Bill [1] https://github.com/wdenton/.emacs.d/blob/master/setup/setup-orgmode.el -- William Denton :: Toronto, Canada --- Listening to Art: https://listeningtoart.org/ https://www.miskatonic.org/ --- GHG.EARTH: http://ghg.earth/ Caveat lector. --- STAPLR: http://staplr.org/
