Re: [O] [babel] Replace results with ascii package caption
Eric Schulte writes: > t...@tsdye.com (Thomas S. Dye) writes: > >> Hi Eric, >> >> Eric Schulte writes: >> >>> Would it be possible to swap the results and caption lines? >> >> The caption lines are part of the ascii output. I think I'd have to >> swap them manually. > > I didn't realize that this was being produced by an external package > called from the code block. If this is the case then the package itself > will need a special setting for appending results so that it doesn't > output a caption line. > > [...] >> >> This is an interesting case. As other packages start to provide Org >> Mode output this kind of problem might crop up again. Is there any >> limit to the Org Mode output a third party might produce? >> > > There need be no limit on what types of results are output by code > blocks. You could always use ":results org" to wrap the results in an > Org-mode block to make the extent of the results clear regardless of > their contents. Thanks Eric. This was the missing piece to my puzzle. Tom > > Best, > >> >> All the best, >> Tom >> >>> Best, >>> >>> t...@tsdye.com (Thomas S. Dye) writes: >>> Aloha all, The code block at the bottom appends its results, rather than replacing them. Here are the header arguments: Name: test-replace-results Lang: R Header Arguments: :cache no :exportscode :hlines no :noweb yes :padnewline yes :resultsraw output replace :sessionnone :tangle no Everything works fine without the ascii package caption argument. * Babel replace results #+name: test-replace-results #+header: :results output raw #+BEGIN_SRC R library(ascii) cap <- "Test replace results" x <- runif(100) y <- ascii(quantile(x),include.colnames=T,header=T,caption=cap) print(y,type="org") rm(cap,x,y) #+END_SRC #+RESULTS: test-replace-results #+CAPTION: Test replace results | 0% | 25% | 50% | 75% | 100% | |--+--+--+--+--| | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | #+CAPTION: Test replace results | 0% | 25% | 50% | 75% | 100% | |--+--+--+--+--| | 0.01 | 0.21 | 0.44 | 0.76 | 1.00 | I'm using Org-mode version 7.8.03 (release_7.8.03.546.gf6ea). All the best, Tom -- Thomas S. Dye http://www.tsdye.com
Re: [O] [babel] Replace results with ascii package caption
t...@tsdye.com (Thomas S. Dye) writes: > Hi Eric, > > Eric Schulte writes: > >> Would it be possible to swap the results and caption lines? > > The caption lines are part of the ascii output. I think I'd have to > swap them manually. I didn't realize that this was being produced by an external package called from the code block. If this is the case then the package itself will need a special setting for appending results so that it doesn't output a caption line. [...] > > This is an interesting case. As other packages start to provide Org > Mode output this kind of problem might crop up again. Is there any > limit to the Org Mode output a third party might produce? > There need be no limit on what types of results are output by code blocks. You could always use ":results org" to wrap the results in an Org-mode block to make the extent of the results clear regardless of their contents. Best, > > All the best, > Tom > >> Best, >> >> t...@tsdye.com (Thomas S. Dye) writes: >> >>> Aloha all, >>> >>> The code block at the bottom appends its results, rather than replacing >>> them. Here are the header arguments: >>> >>> Name: test-replace-results >>> Lang: R >>> Header Arguments: >>> :cache no >>> :exportscode >>> :hlines no >>> :noweb yes >>> :padnewline yes >>> :resultsraw output replace >>> :sessionnone >>> :tangle no >>> >>> Everything works fine without the ascii package caption argument. >>> >>> * Babel replace results >>> #+name: test-replace-results >>> #+header: :results output raw >>> #+BEGIN_SRC R >>> library(ascii) >>> cap <- "Test replace results" >>> x <- runif(100) >>> y <- ascii(quantile(x),include.colnames=T,header=T,caption=cap) >>> print(y,type="org") >>> rm(cap,x,y) >>> #+END_SRC >>> #+RESULTS: test-replace-results >>> #+CAPTION: Test replace results >>> | 0% | 25% | 50% | 75% | 100% | >>> |--+--+--+--+--| >>> | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | >>> #+CAPTION: Test replace results >>> | 0% | 25% | 50% | 75% | 100% | >>> |--+--+--+--+--| >>> | 0.01 | 0.21 | 0.44 | 0.76 | 1.00 | >>> >>> I'm using Org-mode version 7.8.03 (release_7.8.03.546.gf6ea). >>> >>> All the best, >>> Tom -- Eric Schulte http://cs.unm.edu/~eschulte/
Re: [O] [babel] Replace results with ascii package caption
Hi Eric, Eric Schulte writes: > Would it be possible to swap the results and caption lines? The caption lines are part of the ascii output. I think I'd have to swap them manually. > > e.g., this > >> #+RESULTS: test-replace-results >> #+CAPTION: Test replace results >> | 0% | 25% | 50% | 75% | 100% | >> |--+--+--+--+--| >> | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | > > to this > >> #+CAPTION: Test replace results >> #+RESULTS: test-replace-results >> | 0% | 25% | 50% | 75% | 100% | >> |--+--+--+--+--| >> | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | > > everything following #+results is expected to be part of the results, > and it would be simpler to not add special cases to this behavior for > lines that look like Org-mode comment constructs. > This is an interesting case. As other packages start to provide Org Mode output this kind of problem might crop up again. Is there any limit to the Org Mode output a third party might produce? All the best, Tom > Best, > > t...@tsdye.com (Thomas S. Dye) writes: > >> Aloha all, >> >> The code block at the bottom appends its results, rather than replacing >> them. Here are the header arguments: >> >> Name: test-replace-results >> Lang: R >> Header Arguments: >> :cache no >> :exportscode >> :hlines no >> :noweb yes >> :padnewline yes >> :resultsraw output replace >> :sessionnone >> :tangle no >> >> Everything works fine without the ascii package caption argument. >> >> * Babel replace results >> #+name: test-replace-results >> #+header: :results output raw >> #+BEGIN_SRC R >> library(ascii) >> cap <- "Test replace results" >> x <- runif(100) >> y <- ascii(quantile(x),include.colnames=T,header=T,caption=cap) >> print(y,type="org") >> rm(cap,x,y) >> #+END_SRC >> #+RESULTS: test-replace-results >> #+CAPTION: Test replace results >> | 0% | 25% | 50% | 75% | 100% | >> |--+--+--+--+--| >> | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | >> #+CAPTION: Test replace results >> | 0% | 25% | 50% | 75% | 100% | >> |--+--+--+--+--| >> | 0.01 | 0.21 | 0.44 | 0.76 | 1.00 | >> >> I'm using Org-mode version 7.8.03 (release_7.8.03.546.gf6ea). >> >> All the best, >> Tom -- Thomas S. Dye http://www.tsdye.com
Re: [O] [babel] Replace results with ascii package caption
Would it be possible to swap the results and caption lines? e.g., this > #+RESULTS: test-replace-results > #+CAPTION: Test replace results > | 0% | 25% | 50% | 75% | 100% | > |--+--+--+--+--| > | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | to this > #+CAPTION: Test replace results > #+RESULTS: test-replace-results > | 0% | 25% | 50% | 75% | 100% | > |--+--+--+--+--| > | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | everything following #+results is expected to be part of the results, and it would be simpler to not add special cases to this behavior for lines that look like Org-mode comment constructs. Best, t...@tsdye.com (Thomas S. Dye) writes: > Aloha all, > > The code block at the bottom appends its results, rather than replacing > them. Here are the header arguments: > > Name: test-replace-results > Lang: R > Header Arguments: > :cache no > :exportscode > :hlines no > :noweb yes > :padnewline yes > :resultsraw output replace > :sessionnone > :tangle no > > Everything works fine without the ascii package caption argument. > > * Babel replace results > #+name: test-replace-results > #+header: :results output raw > #+BEGIN_SRC R > library(ascii) > cap <- "Test replace results" > x <- runif(100) > y <- ascii(quantile(x),include.colnames=T,header=T,caption=cap) > print(y,type="org") > rm(cap,x,y) > #+END_SRC > #+RESULTS: test-replace-results > #+CAPTION: Test replace results > | 0% | 25% | 50% | 75% | 100% | > |--+--+--+--+--| > | 0.02 | 0.28 | 0.49 | 0.78 | 0.98 | > #+CAPTION: Test replace results > | 0% | 25% | 50% | 75% | 100% | > |--+--+--+--+--| > | 0.01 | 0.21 | 0.44 | 0.76 | 1.00 | > > I'm using Org-mode version 7.8.03 (release_7.8.03.546.gf6ea). > > All the best, > Tom -- Eric Schulte http://cs.unm.edu/~eschulte/