Re: [O] stop results drawers from folding?
Hello, John Kitchin writes: > I have tracked this issue down to the last line of this function: > > (defun org-show-entry () > "Show the body directly following this heading. > Show the heading too, if it is currently invisible." > (interactive) > (save-excursion > (ignore-errors > (org-back-to-heading t) > (outline-flag-region >(max (point-min) (1- (point))) >(save-excursion > (if (re-search-forward > (concat "[\r\n]\\(" org-outline-regexp "\\)") nil t) > (match-beginning 1) >(point-max))) >nil) > (org-cycle-hide-drawers 'children > > This command gets called in many places, e.g. org-next-block, which is > called by org-babel-next-src-block. It is inconvenient when you use results > drawers, as it closes them when you navigate around. > > It isn't obvious how to suppress that behavior. Any thoughts? I see. There are some changes with drawers visibility on master. You may want to test that branch. Regards, -- Nicolas Goaziou0x80A93738
Re: [O] stop results drawers from folding?
I have tracked this issue down to the last line of this function: (defun org-show-entry () "Show the body directly following this heading. Show the heading too, if it is currently invisible." (interactive) (save-excursion (ignore-errors (org-back-to-heading t) (outline-flag-region (max (point-min) (1- (point))) (save-excursion (if (re-search-forward (concat "[\r\n]\\(" org-outline-regexp "\\)") nil t) (match-beginning 1) (point-max))) nil) (org-cycle-hide-drawers 'children This command gets called in many places, e.g. org-next-block, which is called by org-babel-next-src-block. It is inconvenient when you use results drawers, as it closes them when you navigate around. It isn't obvious how to suppress that behavior. Any thoughts? John --- Professor John Kitchin Doherty Hall A207F Department of Chemical Engineering Carnegie Mellon University Pittsburgh, PA 15213 412-268-7803 @johnkitchin http://kitchingroup.cheme.cmu.edu On Sat, Feb 3, 2018 at 8:10 AM, John Kitchin wrote: > hm. naturally even though this has bugged me for months, publically asking > about it seems to have made the issue vanish! If I figure out what the > issue was I will bring it up again later. Sorry for the noise. > > John > > --- > Professor John Kitchin > Doherty Hall A207F > Department of Chemical Engineering > Carnegie Mellon University > Pittsburgh, PA 15213 > 412-268-7803 <(412)%20268-7803> > @johnkitchin > http://kitchingroup.cheme.cmu.edu > > > On Thu, Feb 1, 2018 at 2:44 PM, Nicolas Goaziou > wrote: > >> Hello, >> >> John Kitchin writes: >> >> > I use results drawers for my src blocks alot, and for a while now every >> > time I run one block, it folds all the other results drawers, unless I >> use >> > visible-mode. >> > >> > Is there a way to prevent this drawer folding so that they are open >> when I >> > open a document, and they stay open while running blocks? >> >> Would you have an ECM demonstrating the issue? >> >> Regards, >> >> -- >> Nicolas Goaziou >> > >
Re: [O] stop results drawers from folding?
hm. naturally even though this has bugged me for months, publically asking about it seems to have made the issue vanish! If I figure out what the issue was I will bring it up again later. Sorry for the noise. John --- Professor John Kitchin Doherty Hall A207F Department of Chemical Engineering Carnegie Mellon University Pittsburgh, PA 15213 412-268-7803 @johnkitchin http://kitchingroup.cheme.cmu.edu On Thu, Feb 1, 2018 at 2:44 PM, Nicolas Goaziou wrote: > Hello, > > John Kitchin writes: > > > I use results drawers for my src blocks alot, and for a while now every > > time I run one block, it folds all the other results drawers, unless I > use > > visible-mode. > > > > Is there a way to prevent this drawer folding so that they are open when > I > > open a document, and they stay open while running blocks? > > Would you have an ECM demonstrating the issue? > > Regards, > > -- > Nicolas Goaziou >
Re: [O] stop results drawers from folding?
Hello, John Kitchin writes: > I use results drawers for my src blocks alot, and for a while now every > time I run one block, it folds all the other results drawers, unless I use > visible-mode. > > Is there a way to prevent this drawer folding so that they are open when I > open a document, and they stay open while running blocks? Would you have an ECM demonstrating the issue? Regards, -- Nicolas Goaziou