On Saturday 29 October 2016 14:20:34 Jon Elson wrote:
> On 10/28/2016 09:41 PM, Jon Elson wrote:
> > This is why I keep popping up with asking about
> > externally-triggered RT threads, which should relieve all
> > the Pico Systems boards from the RT latency issue. I
> > don't mind doing some wor
On Sat, 29 Oct 2016 13:20:34 -0500
Jon Elson wrote:
> On 10/28/2016 09:41 PM, Jon Elson wrote:
> > This is why I keep popping up with asking about
> > externally-triggered RT threads, which should relieve all
> > the Pico Systems boards from the RT latency issue. I
> > don't mind doing some w
On 10/28/2016 09:41 PM, Jon Elson wrote:
> This is why I keep popping up with asking about
> externally-triggered RT threads, which should relieve all
> the Pico Systems boards from the RT latency issue. I
> don't mind doing some work on this, especially testing and
> verification, but I'm not
On 10/29/2016 01:41 AM, Nicklas Karlsson wrote:
>> Worse. My ppmc driver exports pins based on what devices it
>> detects on the parallel port bus. (I think the Mesa drivers
>> do something similar.)
> How do you write configuration for these changing ports today?
> ...
>
On 29 October 2016 at 11:23, EBo wrote:
> Is there already a how-to on doing all this?
http://linuxcnc.org/docs/2.7/html/hal/tutorial.html
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— Geo
On Oct 29 2016 4:03 AM, andy pugh wrote:
> On 28 October 2016 at 18:36, Nicklas Karlsson
> wrote:
>> Are there a method to probe the hardware without a *.hal file?
>
> Yes, the software can send individual HAL commands.
Is there already a how-to on doing all this?
---
On 28 October 2016 at 18:36, Nicklas Karlsson
wrote:
> Are there a method to probe the hardware without a *.hal file?
Yes, the software can send individual HAL commands.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses,
For hostmot2 driver:
halcmd loadrt hostmot2
halcmd loadrt hm2_eth board_ip="192.168.1.10" list pin list sig list param
load and report the pin. I think with the correct parameters it will report all
needed parameters to select or possible generate correct symbol for gschem back
annotation or
