> On 19. Sep 2018, at 16:27, Moses McKnight wrote:
>
> Run-from-line for instance has more problems than that mentioned in #246, it
> also does very bad stuff if there is a probe move in an external subroutine
> prior to the line you try to run from. I implemented what I called "simple
> r
I agree that we should release sooner than later. It would be great if the
issues mentioned by Rene were fixed prior to a release, but realistically some
of those may take a while.
Run-from-line for instance has more problems than that mentioned in #246, it
also does very bad stuff if there i
> Mick
>
> I hope you don't mind I pushed this back to the list.
>
> I too was hoping to make inroads for modularity, future proofing, and
> lowering the bar for future developers.
Instead of NML there might be some kind of standard protocol to use to talk
with machine running real time part? O
On Wed, Sep 19, 2018 at 12:46 AM Kurt Jacobson
wrote:
>
> I also think that jepler's Stretch ISO is ready for prime time and should
> be put in the spot light as it deserves :)
> Cheers,
> Kurt
>
Has the issue that the Stretch ISO doesn't install without an internet
connection been fixed?
Eric
On Wed, 19 Sep 2018 11:37:10 +0200
Rene Hopf via Emc-developers wrote:
> I agree that 2.8-pre is very stable at the moment, and works great with
> stretch.
> But as far as Im aware those features have already been tested by other
> people.
I used during development for quite long time, I could
On Wednesday 19 September 2018 05:37:10 Rene Hopf via Emc-developers
wrote:
> I agree that 2.8-pre is very stable at the moment, and works great
> with stretch. But as far as Im aware those features have already been
> tested by other people. A release is probably a very good idea, there
> are a
I agree that 2.8-pre is very stable at the moment, and works great with stretch.
But as far as Im aware those features have already been tested by other people.
A release is probably a very good idea, there are a few things I would like to
address before:
- https://github.com/LinuxCNC/linuxcnc/iss