Added documentation. I hope I did it correctly.
Citando Filipe Tomaz :
No. The document part:
3. FANUC LIKE TOOL ORIENTATIONS & ARCS
is wrong. Any Fanuc manual have it correct. For example:
https://forum.linuxcnc.org/forum/26-turning/26065-current-turning-capabilities-status?start=110
No. The document part:
3. FANUC LIKE TOOL ORIENTATIONS & ARCS
is wrong. Any Fanuc manual have it correct. For example:
https://forum.linuxcnc.org/forum/26-turning/26065-current-turning-capabilities-status?start=110
(post 40105) have an attachment that I sent back in 2013.
Citando Robe
Does this follow the wiki page info i added quite some time back??
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?BackToolLathe
rob
On 19/03/2016 22:52, Filipe Tomaz wrote:
> Please add this feature to linuxcnc. It does not change the behavior
> unless
> user places on the ini file, on the EMCIO secti
Thank you for addressing most of the issues I raised in my earlier
e-mail.
On Sun, Mar 20, 2016 at 03:01:37PM +, Filipe Tomaz wrote:
>If it could be in this email then the documentation would be:
The documentation is written in asciidoc files with extension ".txt".
Use the same style of m
Thanks Filipe ,
i will certianly give this patch a try .
On 20 March 2016 at 15:01, Filipe Tomaz wrote:
> 2nd attempt
>
>Changes:
>Signed-off
>Solved when a tool table is written by Gcode such as G10
>Corrected indentation for 4 space/tab
>
>What I still did not do:
>Doc
2nd attempt
Changes:
Signed-off
Solved when a tool table is written by Gcode such as G10
Corrected indentation for 4 space/tab
What I still did not do:
Documentation for the changes. I do not know where the documentation
should be placed. In this email? in a separated file that
Thank you for offering this patch to improve LinuxCNC.
I don't know enough about lathes or fanuc gcode to evaluate whether the
general idea of changing orientation numbers in this way is right or
wrong. I hope someone else will be able to do this. Instead, my notes
below are all boring technical
Please add this feature to linuxcnc. It does not change the behavior unless
user places on the ini file, on the EMCIO section:
FANUC_TOOLTIP_ORIENTATION = 1
fanuc_tooltip_orientation.patch
Description: Binary data
--
T
