Oh, thanks Andy!
On Monday, August 16, 2021, 10:46:49 PM UTC, andy pugh
wrote:
On Mon, 16 Aug 2021 at 19:58, Alec Ari via Emc-developers
wrote:
>
> RTAI 5.3.1 for LinuxCNC is running pretty good right now with kernel
> 4.19.195. If you need lower latency, that is my suggestion. I do
On Mon, 16 Aug 2021 at 19:58, Alec Ari via Emc-developers
wrote:
>
> RTAI 5.3.1 for LinuxCNC is running pretty good right now with kernel
> 4.19.195. If you need lower latency, that is my suggestion. I don't know
> anything about USC and it may not be compatible with the LinuxCNC RTAI hal
> dri
RTAI 5.3.1 for LinuxCNC is running pretty good right now with kernel 4.19.195.
If you need lower latency, that is my suggestion. I don't know anything about
USC and it may not be compatible with the LinuxCNC RTAI hal drivers, throwing
this out there on a whim.
On Sunday, August 15, 2021, 10
On Sun, 15 Aug 2021 at 21:59, Jon Elson wrote:
> He is getting rotten latency jitter, around 66 us. He
> intends to use it with my Unversal Stepper Controller, which
> needs better jitter than that.
66uS isn't great, but it is borderline OK for software stepping and I
would expect it to be more
On Sunday 15 August 2021 16:58:51 Jon Elson wrote:
> I have a customer that has installed 2.8.2 from the iso onto
> a system with the Intel i7 CPU.
>
> He is getting rotten latency jitter, around 66 us. He
> intends to use it with my Unversal Stepper Controller, which
> needs better jitter than t
