Re: China CCC and CE?

Curt, The main difference is that a major component in your system such as a power supply or monitor must also be CCC Certified or must have the component evaluated separately by the China test house. This can be done by by submitting an IEC CB Test Report with China deviations on the

IEEE EMC Soc United Kingdom and Republic of Ireland event at The Open University Campus - Wednesday 26th March 2008

Everyone Sorry for the late circulation of this notice. The event is free, but please note the need to register in advance. Best wishes Brian -- IEEE Event Notice. IEEE Electromagnetic Compatibility Soc.

Re: Terminations for PC during emission measurements

In message 8fe3816af82d194db98d7451040bd58a0cd...@mer2-excha2.echostar.com, dated Thu, 20 Mar 2008, Grasso, Charles charles.gra...@echostar.com writes: Wendy - I strongly recommend you research this more thoroughly. PCs have special test requirements (such as active I/O!) that you will need

RE: Terminations for PC during emission measurements

HI Wendy Charles is absolutely correct - you need to be careful here. Historically the position of the FCC seems to have been that when they say a port is to have a 'load' they mean that the load is to representative of the device. Not just in impedance, but it is to also represent the

RE: Terminations for PC during emission measurements

Wendy - I strongly recommend you research this more thoroughly. PCs have special test requirements (such as active I/O!) that you will need to accommodate. From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of wendy...@labone.com.sg Sent: Tuesday, March 18, 2008 5:49 PM To:

March 25 PSES Meeting: Rich Pescatore--The Future of Product Safety Engineering

IEEE Product Safety Engineering Society , Santa Clara Valley Chapter Meeting announcment: Friends and Colleagues, You won't want to miss this month's meeting as we welcome Rich Pescatore who will be doing a presentation on the new hazard based 62368 standard! There is a REVOLUTION taking place

Re: China CCC and CE?

In message e2f07269-948f-4a2c-b173-689cbedba...@umn.edu, dated Thu, 20 Mar 2008, Curt McNamara mcnam...@umn.edu writes: Is there any relation between having met CE standards and getting a CCC certificate? I am aware many of the CCC tests are based on IEC standards. In some cases. But to give

Job Opportunity on Long Island

Forwarded for Mike Catalano, Siemens Energy Automation Siemens Job Posting 66010; Compliance Engineer; Hauppauge, NY - The candidate we are seeking will have a BS in Engineering with a minimum 5 years experience in approval - certification - regulatory standards work; experience with hazardous

Re: wheeled bin symbol

Hi Alan, From EN 50149:2006 you can read that the line underneath must be: Quote: The height (h) of the bar shall be the greater of 0.3 a or 1mm. Where a is the height from bottom of trash bin to the hinge of the lid, refer to drawings. Best regards Peter - Original Message - From: