Does anyone have information on 2.4 GHz radio requirements for Nicaragua?
A search on the internet finds a lot of ham stuff but not much else.
Thanks
Bob Heller
St. Paul, MN 55107-1208
Tel: 651-778-6336
Fax: 651-778-6252
-
This
On a related topic. I am hoping somebody can easily double check a calculation
I made for the ground wire, and it only has to be a rough measurement. It would
appear the wire the designers are using is going to be too smalI for a ground
bond wire. I have a 6.5 meter 26 AWG stranded wire and
Bob
You need to get hold of
Sent from my iPhone
On Nov 28, 2011, at 8:27 AM, rehel...@mmm.com wrote:
Does anyone have information on 2.4 GHz radio requirements for Nicaragua?
A search on the internet finds a lot of ham stuff but not much else.
Thanks
Bob Heller
St. Paul, MN
Bob
You need to get hold of Normativa Tecnica no. 001-2006 to access the info for
2.4 Ghz, 5 Ghz and 900 MHz. If you have specific questions, we offer a research
service
Best Regards
Peter Merguerian
pe...@goglobalcompliance.com
www.goglobalcompliance.com
(408) 931-3303
Sent from my iPhone
Does anyone know if STM-1 is regulated in Japan?
Peter
Sent from my iPhone
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
This response is to Mr. McInturff directly below. Did not receive original
post that started thread.
The usual number is 10 nH per cm, or 1 uH/m, but that is a quibble. Such
numbers are of use only when the wire is electrically short. At 100 MHz,
the wire would have to be no more than one foot
In message deb5a5ac-487c-4be9-ae40-6514b822c...@yahoo.com, dated Mon,
28 Nov 2011, Peter Merguerian pmerguerian2...@yahoo.com writes:
Bob
You need to get hold of
Sent from my iPhone
Could be problematical. (;-)
--
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
John
In message 3fmtlskjz80of...@jmwa.demon.co.uk, dated Mon, 28 Nov 2011,
John Woodgate j...@jmwa.demon.co.uk writes:
In message deb5a5ac-487c-4be9-ae40-6514b822c...@yahoo.com, dated Mon,
28 Nov 2011, Peter Merguerian pmerguerian2...@yahoo.com writes:
Bob
You need to get hold of
Sent from my
Hey Gary - Based on the values presented, I ran the calculation and got very
similar results. I'd say that the
number you have is OK.
Best Regards
Charles Grasso
Compliance Engineer
Echostar Communications
(w) 303-706-5467
(c) 303-204-2974
(t) 3032042...@vtext.com
(e) charles.gra...@echostar.com
I've received feedback that NF C 100-15 (France wiring rules) requires
testing against either NF C 32-070 (France) with resulting ratings of C1
or C2, or against EN 60332-1-2, for all nonresidential locations.
The scope of the EN 60332-1-2 indicates vertical flame spread testing is
performed (I
10 matches
Mail list logo