Yes, worst case means worst case.
Dennis Ward
This communication and its attachements contain information from PCTEST
Engineering Laboratory, Inc., and is intended for the exclusive use of the
recipient(s) named above. It may contain information that is confidential
and/or
In one of my previous lives when I was engaged in EMI testing, QP testing was
done manually using the HP Quasi Peak Adapter. I remember using a time period
of 20 seconds for QP measurements, which was accepted by FCC.
Regards
Ravinder Ajmani
HGST, a Western Digital company
5601 Great Oaks Pkwy
In message
99532047d6a52847ab271f822ae9efdc0177713...@cktexmb01.cds.int, dated
Thu, 26 Mar 2015, Paasche, Dieter dieter.paas...@christiedigital.com
writes:
with the
exception of any brief isolated high reading, which shall be ignored
Too vague. Bad standard! Go to the naughty step.
--
OOO
From CISPR 22 Section 6.2
6.1 Limits below 1 GHz
The EUT shall meet the limits of Table 5 or Table 6 when measured at the
measuring
distance R in accordance with the methods described in Clause 10. If the
reading on the
measuring receiver shows fluctuations close to the limit, the reading shall
Dear group,
When measuring emissions using a Quasi Peak detector are there any regulations
or guidance concerning the amount of time one should dwell on a single
frequency for a measurement?
I know it depends on the nature of the signal. In this case, the signal of
interest results in a burst
In message
cec6039c09630543852b1a8cfa0a0c790e0a3...@stwpiexc03.sats.corp, dated
Thu, 26 Mar 2015, Pawson, James james.paw...@echostar.com writes:
When measuring emissions using a Quasi Peak detector are there any
regulations or guidance concerning the amount of time one should dwell
on a
James,
Since you are aware of it, you need to make sure you capture the max
reading.
Rob Oglesbee
Radian Research
(765) 449-5505
This message, and any attachments to it, may contain information that is
privileged, confidential, and exempt from disclosure under applicable law.
If the
7 matches
Mail list logo