Dear Don, as long as the technical requirements in V3-2005.04 are valid, you just need to perform measurements up to 1 GHz. In the actual Japanese standard it is referred to CISPR 22:1997.
Kind regards i.V. Mario Lehmann Geschäftsbereich European Compliance Laboratory ____________________________________________________________ HERBERG. Service Plus GmbH Tel: +49 911 59835-923 Nordostpark 51 Fax: +49 911 59835-90 90411 Nürnberg mailto: <mailto:mlehm...@herberg-sp.de> mlehm...@herberg-sp.de <http://www.herberg-sp.de/> http://www.herberg-sp.de djumbdenst...@tycoint.com Gesendet von: emc-p...@ieee.org 05.10.2005 18:25 An emc-p...@ieee.org Kopie Thema VCCI testing above 1 GHz With the change in CISPR 22, anyone know how testing above 1 GHz is being addressed in Japan today? Don Umbdenstock Manager Compliance Engineering Tyco Safety Products / Sensormatic 6600 Congress Avenue Boca Raton, FL 33487 USA 561.912.6440 djumbdenst...@tycoint.com From: Pettit, Ghery [mailto:ghery.pet...@intel.com] Sent: Monday, October 03, 2005 10:49 AM To: Gordon,Ian Cc: emc-p...@ieee.org Subject: RE: Above 1 GHz EMI testing with horn antenna Rumor (I stress, rumor) has it that we should see both EN 55022:2005 and Amendment A1:2005 to EN 55022:2005 show up in the OJ in November. We'll see what the date of withdrawal is then. Ghery From: Gordon,Ian [mailto:ian.gor...@bocedwards.com] Sent: Monday, October 03, 2005 1:40 AM To: Pettit, Ghery Cc: emc-p...@ieee.org Subject: RE: Above 1 GHz EMI testing with horn antenna Ghery Do you know if there a timetable for publishing this in the European OJ as an ammendment to EN55022? Ian Gordon > -----Original Message----- > From: Pettit, Ghery [mailto:ghery.pet...@intel.com] > Sent: 02 October 2005 04:12 > To: bdew...@ix.netcom.com; Dward ATCB; regula...@relia.net; > emcp...@aol.com > Cc: emc-p...@ieee.org > Subject: RE: Above 1 GHz EMI testing with horn antenna > > > Well, it isn't a "proposed CISPR 22 standard" anymore. Amendment 1 to > CISPR 22:2005 was published in July and provides limits from > 1 GHz to 6 > GHz. The actual test methods, etc are provided in the CISPR 16 series > of documents. See the amendment for the specific citations. > > No height scan is required for CISPR 22 above 1 GHz IFF (remember the > old algebra IFF - If and only if?) the EUT falls within the beam width > of the antenna. Otherwise, some height scanning is needed. > Again, look > at the amendment and read the cited portions from CISPR 16-x. No bore > sighting either way. > > Ghery S. Pettit > Intel Corporation > *********************************************************************** The information contained in this email and any attachments may be confidential and is provided solely for the use of the intended recipient(s). If you are not the intended recipient, you are hereby notified that any disclosure, distribution, or use of this e-mail, its attachments or any information contained therein is unauthorised and prohibited. If you have received this in error, please contact the sender immediately and delete this e-mail and any attachments. No responsibility is accepted for any virus or defect that might arise from opening this e-mail or attachments, whether or not it has been checked by anti-virus software. - 2005 IEEE Symposium on Product Safety Engineering 3-4 October Schaumburg, IL http://www.ieee-pses.org/symposium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - 2005 IEEE Symposium on Product Safety Engineering 3-4 October Schaumburg, IL http://www.ieee-pses.org/symposium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
