, January 14, 2010 9:55 AM
To: Andy Garcia; emc-p...@ieee.org
Subject: RE: Please help me identify this symbol...
http://www.saludpreventiva.com/web/pdf/
SO%2015223-1%20S%EDmbolos%20-%20Requisitos%20generales.pdf
Fig 5.13 on pdf page 12/21 or page 5 as typed on doc page
Thanks everyone. I too, suspected that it was the factory ID. It's actually
the date of manufacture.
Andy Garcia
Staff Product Compliance Engineer
Beckman Coulter, Inc.
Miami, Fl
From: Andy Garcia arg...@yahoo.com
To: emc-p...@ieee.org
Sent: Thu, January
Andy -
I suspect I am going to be embarrassed about this, but my initial reaction to
the symbol was to say factory, so I think it's Place of Manufacture.
Nothing to base it on, I am afraid!
Regards,
Mark
--
Mark Hone, HESS Manager
Wellman Defence Limited
Williams Road
http://www.saludpreventiva.com/web/pdf/
SO%2015223-1%20S%EDmbolos%20-%20Requisitos%20generales.pdf
Fig 5.13 on pdf page 12/21 or page 5 as typed on doc page.
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Andy Garcia
Sent: 14 January
ISO 7000-2497 - Date of Manufacture
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Wordley, Chris
Sent: Thursday, January 14, 2010 9:31 AM
To: Andy Garcia; emc-p...@ieee.org
Subject: RE: Please help me identify this symbol...
Hi Andy
Hi Andy
I don't know, but it looks like a drawing of a factory i.e. indication of the
actual factory in which the product was manufactured, for those products made
in more than one.
Chris
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Andy
6 matches
Mail list logo